Keeson RF304 Adjustable Bed Remote Control User Manual

Keeson RF304 Adjustable Bed Remote Control

Specifikationer

• Produktnavn: FJERNBETJENING
• Model: RC304C
• Input: 3 x Battery AAA 1.5V
• Fabrikant: Keeson Technology Corporation Limited
• Manufacturing Country: Kina

Knap funktion

BRUGSANVISNING

• Hovedet op
  • Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released；
• Hovedet ned
  • Press and hold the HEAD DOWN button of the remote, the head actuator moves in, stop when released；
• Foden op
  • Press and hold the FOOT UP button of the remote, the foot actuator moves out, and stops when released;
• Foden ned
  • Press and hold the FOOT DOWN button of the remote. The foot actuator moves in and stops when released
• Undersengs lys
  • Click the Underbed light button to open or shut the light under the bed.
• Massage hoved
  • Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
• Massage fod
  • Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
• Massage timer
  • If the massage motors do not work, the button is invalid. If the massage motors are working, click the button to switch the massage time. When the massage time switches to 0, turn off the massage;
• Flad
  • Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
• Zero G
  • Click the ZG button, the actuator moves to the ZG position, stops when any button is clicked during the movement;
• Hukommelsesposition
  • Click the memory position to move the actuator to the memory position.
• One-touch sleep
  • Trigger the sleep-inducing process and sequentially perform the series of sleep-inducing actions

FCC

Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage skadelig interferens,
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Drej eller flyt modtagerantennen.
• Øg afstanden mellem udstyret og modtageren.
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

Enheden er blevet evalueret til at opfylde de generelle krav til RF-eksponering.

IC RSS advarsel

Denne enhed overholder Industry Canada licensfritagne RSS-standarder. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage interferens,
2. Denne enhed skal acceptere enhver interferens, inklusive interferens, der kan forårsage uønsket drift af enheden.

ISED RSS-advarsel:

Denne enhed overholder Innovation, Science and Economic Development Canada licensfritaget RSS-standard(er). Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage interferens,
2. Denne enhed skal acceptere enhver interferens, inklusive interferens, der kan forårsage uønsket drift af enheden.

Fejlfinding

• Massage Timer Button Not Working: Ensure that the massage motors are currently active. The massage timer button is only functional when the massage motors are running.
• Bed Movement Stops Unexpectedly: If the bed is moving to a “Flat” or “Zero G” position and stops, check if any other button was accidentally pressed. Pressing any button during these movements will halt the process.
• Fjernbetjeningen reagerer ikke: Check the batteries. The remote requires 3 x AAA 1.5V batteries. Replace them if necessary.