Keeson RC309A Remote Control User Manual

Keeson RC309A Remote Control

Specifikationer

• Produktnavn: FJERNBETJENING
• Model: RC309A
• Input: 2 x AAA 1.5V batterier
• Fabrikant: Keeson Technology Corporation Limited
• Fremstillingsland: Kina

Brugsvejledning

Figure 1 illustrates the buttons on the remote control.

1. Hovedet op
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Hovedet ned
   Press and hold the HEAD DC NNN button of the remote, the head actuator moves in, and stops when released.
3. Foden op
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Foden ned
   Press and hold the FOOT button of the remote, the foot actuator moves in, stop when released.
5.  Flad
   lick FLAT button, the bed goes flat. Stop when you click any button during the process of going flat.
6. Massage hoved 
   lick MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2;
7. ZG knap
   Click the ZG button, the actuator moves to the ZG position, stop when clicking any button during the movement.
8. Memory Favorite position
   licking once will move the app to the Favorite position; long-pressing to memorize the position. The backlight will flash twice, and releasing the button will continue the flashing.
9. Låse
   Press and hold the child lock button until the red light flashes twice, indicating that the child lock is successfully engaged. During the locking process, pressing any button will cause the red light to flash for 2 seconds, indicating that the lock is engaged.

Produktinformation

• Product Name: REMOTE CONTROL
• Model: RC309B
• Input: 2 x Battery AAA 1.5V
• Producent: Keeson Technology Corporation Limited
• Fremstillingsland: Kina

FCC advarsel:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can adiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Drej eller flyt modtagerantennen.
• Øg afstanden mellem udstyret og modtageren.
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio-tv-tekniker for at få hjælp.

Ændringer eller modifikationer, der ikke udtrykkeligt er godkendt af den part, der er ansvarlig for overholdelse, kan annullere brugerens ret til at betjene udstyret. Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage skadelig interferens,
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Oplysninger om RF-eksponering

Enheden er blevet vurderet til at opfylde generelle krav til RF-eksponering. Enheden kan bruges i eksponeringstilstand uden begrænsninger.

ISED RSS-advarsel:

This device complies with Innovation, Science and Economic Development Canada licence, exemplifying RSS standard(s). Operation is subject to the following two conditions:

• Denne enhed må ikke forårsage interferens.
• This device must accept any interference, including interference that mav cause undesired operation of the device.

Fejlfinding

If the remote control is not functioning as expected:

• Tjek batterier: Ensure that two AAA 1.5V batteries are correctly inserted and have sufficient charge.
• Børnelås: If the remote is unresponsive and the red light flashes for 2 seconds when a button is pressed, the child lock may be engaged. Refer to section 1.7 to disengage the child lock.
• Interferens: This device complies with FCC rules regarding interference. If you experience unexpected operation, it might be due to external interference. Ensure there are no strong radio frequency sources nearby.

Ofte stillede spørgsmål

Q: What type of batteries does the RC309A remote control use?
A: The remote control requires 2 x AAA 1.5V batteries.

Q: How do I stop the bed from moving once I’ve pressed a position button?
A: For continuous movements like Head Up/Down or Foot Up/Down, release the button to stop. For preset positions like Flat or ZG, clicking any button during the movement will stop the process.

Q: What does it mean if the red light flashes for 2 seconds when I press a button?
A: This indicates that the child lock feature is currently engaged. You will need to disengage the child lock to use the remote’s functions (refer to section 1.7).

Q: Kan jeg modificere fjernbetjeningen?
A: Any changes or modifications not expressly approved by the manufacturer could void your authority to operate the equipment and are not recommended.