Keeson RC302F Remote Control User Manual

Keeson RC302F Remote Control

Specifikationer

• Produktnavn: FJERNBETJENING
• Model: RC302F
• Input: 3 x Battery AAA 1.5V
• Fabrikant: Keeson Technology Corporation Limited
• Manufacturing Country: Kina

Brugsvejledning

Grundlæggende justeringer

• Head Up: Press and hold the ‘HEAD UP’ button. The head actuator will move out. Release to stop.
• Head Down: Press and hold the ‘HEAD DOWN’ button. The head actuator will move in. Release to stop.
• Foot Up: Press and hold the ‘FOOT UP’ button. The foot actuator will move out. Release to stop.
• Foot Down: Press and hold the ‘FOOT DOWN’ button. The foot actuator will move in. Release to stop.
• Lumbar Up: Press and hold the ‘LUMBAR UP’ button. The lumbar actuator will move out. Release to stop.
• Lumbar Down: Press and hold the ‘LUMBAR DOWN’ button. The lumbar actuator will move in. Release to stop.
• Tilt Up: Press and hold the ‘TILT UP’ button. The head tilt actuator will move out. Release to stop.
• Vip ned: Press and hold the ‘TILT DOWN’ button. The head tilt actuator will move in. Release to stop.

Særlige funktioner

• UBB (Underbed Light): Click the ‘UBB’ button to turn the underbed light on or off.
• Massage Head +: Click the ‘MASSAGE HEAD +’ button to cycle through head massage intensity levels (0-1-2-3).
• Massage Head -: Click the ‘MASSAGE HEAD -‘ button to gradually decrease head massage intensity (3 levels).
• Massage Foot +: Click the ‘MASSAGE FOOT +’ button to cycle through foot massage intensity levels (0-1-2-3).
• Massage Foot -: Click the ‘MASSAGE FOOT -‘ button to gradually decrease foot massage intensity (3 levels).
• Massage timer: If massage motors are active, click this button to switch the massage time. Setting the timer to ‘0’ will turn off the massage. This button is inactive if massage motors are off.
• Flad: Click the ‘FLAT’ button to return the bed to a flat position. The process will stop if any other button is clicked during movement.
• Zero G (ZG): Click the ‘ZG’ button to move the bed to the Zero Gravity position. The movement will stop if any other button is clicked during the process.
• Memory Position: Click the ‘MEMORY POSITION’ button to move the bed actuators to a pre-set memory position.

Overview

1. Hovedet op
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Hovedet ned
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, and stops when released.
3. Foden op
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Foden ned
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released.
5. Lumbar up
   Press and hold the LUMBAR UP button of the remote. The lumbar actuator moves out and stops when released.
6. Lumbar down
   Press and hold the LUMBAR DOWN button of the remote, the lumbar actuator moves in, and stops when released.
7. Vip op
   Press and hold the TILT UP button of the remote, the head tilt actuator moves out, and stops when released.
8. Vip ned
   Press and hold the TILT DOWN button of the remote, the head tilt actuator moves in, and stops when released.
9. UBB
   Click the Underbed light button to open or shut the light under the bed.
10. Massage head +
    Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
11. Massage foot +
    Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
12. Massage head –
    Clicking will cause the intensity of the head massage to gradually decrease, with a total of 3 levels.；
13. Massage foot –
    Clicking will cause the foot massage intensity to cycle and decrease gradually, with a total of 3 levels.；
14. Massage timer
    If the massage motors do not work, the button is invalid. If the massage motors work, click the button to switch the massage time. When the massage time switches to 0, turn off the massage.
15. Flad
    Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
16. ZG knap
    Click the ZG button, the actuator moves to the ZG position, and stops when any button is clicked during the movement.
17. Hukommelsesposition
    Click the memory position to move the actuator to the memory position.

FCC-ERKLÆRING

FCC advarsel
Dette udstyr er blevet testet og fundet i overensstemmelse med grænserne for en klasse B digital enhed i henhold til del 15 af FCC-reglerne. Disse grænser er designet til at give rimelig beskyttelse mod skadelig interferens i en boliginstallation. Dette udstyr genererer, bruger og kan udstråle radiofrekvensenergi og kan, hvis det ikke installeres og bruges i overensstemmelse med instruktionerne, forårsage skadelig interferens i radiokommunikation. Der er dog ingen garanti for, at der ikke vil forekomme interferens i en bestemt installation. Hvis dette udstyr forårsager skadelig interferens på radio- eller tv-modtagelse, hvilket kan fastslås ved at slukke og tænde for udstyret, opfordres brugeren til at forsøge at rette op på interferensen ved en eller flere af følgende foranstaltninger:

• Drej eller flyt modtagerantennen.
• Øg afstanden mellem udstyret og modtageren.
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

Ændringer eller modifikationer, der ikke udtrykkeligt er godkendt af den part, der er ansvarlig for overholdelse, kan annullere brugerens ret til at betjene udstyret.
Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage skadelig interferens, og
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Oplysninger om RF-eksponering

• Enheden er blevet vurderet til at opfylde de generelle krav til RF-eksponering. Enheden kan bruges under bærbare eksponeringsforhold uden begrænsninger.

ISED RSS-advarsel
Denne enhed overholder Innovation, Science and Economic Development Canada licensfritaget RSS-standard(er). Driften er underlagt følgende to betingelser:

1. This devicemay not cause interference, and
2. Denne enhed skal acceptere enhver interferens, inklusive interferens, der kan forårsage uønsket drift af enheden.

Fejlfinding

• Fjernbetjeningen svarer ikke: Ensure batteries are correctly inserted and not depleted. Replace with new AAA 1.5V batteries if necessary.
• Bed not moving: Check if the remote’s batteries are working. Ensure no obstructions are preventing bed movement. If the bed is stuck, try pressing the ‘FLAT’ button.
• Massage not working: Ensure the massage motors are turned on. The ‘Massage Timer’ button will be invalid if the motors are off.
• RF-eksponering: Enheden er blevet vurderet til at opfylde generelle krav til RF-eksponering og kan uden begrænsninger bruges under bærbare eksponeringsforhold.

Ofte stillede spørgsmål

• Q: What type of batteries does the remote use?
  • A: The RC302F remote control uses 3 x AAA 1.5V batteries.
• Q: How do I stop the bed from moving to a preset position (eg, Flat or Zero G)?
  • A: You can stop the bed’s movement to a preset position by clicking any other button on the remote during the process.
• Q: Kan jeg justere massageintensiteten?
  • A: Yes, you can increase head/foot massage intensity using ‘MASSAGE HEAD +’ / ‘MASSAGE FOOT +’ buttons and decrease it using ‘MASSAGE HEAD -‘ / ‘MASSAGE FOOT -‘ buttons. There are 3 levels of intensity.
• Q: What does the UBB button do?
  • A: The UBB button controls the underbed light, turning it on or off with a click.
• Q: What should I do if the remote isn’t working after changing batteries?
  • A: Ensure the new batteries are inserted with the correct polarity. If the issue persists, contact Keeson Technology Corporation Limited customer support.