AutoPot provides power-free, automatic watering and irrigation systems for indoor and outdoor hydroponic plant cultivation, utilizing gravity-fed AQUAvalve technology.
AutoPot specializes in plant-driven, power-free automatic watering and irrigation systems tailored for both home growers and commercial agricultural projects. Their unique hydroponic setup operates entirely on gravity, eliminating the usual need for electricity, water pumps, or complex timers to maintain plant hydration.
The core of the AutoPot system lies in the patented AQUAventil technology, which controls water flow by mimicking a natural wet-dry cycle, ensuring plants receive exactly what they need on demand. Ranging from modular easy2grow og 4 Pot XL systems to specialized hydroponic addons like the AirDome, AutoPot's versatile product line supports the efficient, scalable cultivation of indoor and outdoor plants.
Seneste manualer fra manuals+ kurateret til dette mærke.
Almindelige spørgsmål om manualer, registrering og support for dette mærke.
Hold the AQUAvalve at eye level to ensure the silicone on the top float creates a tight seal against the hole below it. If it doesn't look parallel, lift the float, apply pressure to one side, and check again.
AutoPot systems run primarily on gravity. However, if using organic fertilizers, a water pump in the reservoir should run for 15 minutes every 2 hours to keep the solution mixed.
Clean the AQUAvalve using warm soapy water and a toothbrush. Push a paper clip through the nozzle to remove scale, but never use a drill bit on the nozzle as it will cause permanent damage.
Connect the blue bubble pipe to the cross connector and the inside points of the AirDome. Connect the black airline to the outside point, place it at the base of your pot, cover with a fluffy soil/perlite mix, and attach an air pump.
You can reach AutoPot support by emailing mail@autopot.co.uk or calling +44 1276 534894.