1. Introduktion
This manual provides essential information for the safe and effective use of your Zippo Butane Lighter Insert - Yellow Flame. This insert is designed to fit any Classic Zippo lighter case, offering a reliable yellow flame with butane fuel. Please read these instructions carefully before use and retain them for future reference.
Image 1: Zippo Butane Lighter Insert - Yellow Flame, shown in its polished chrome finish.
2. Sikkerhedsoplysninger
ADVARSEL: OPBEVARES UTILGÆNGELIGT FOR BØRN.
Ignite away from face and clothing. Be sure flame is out after use. Contains flammable gas under pressure. Do not keep lit for more than 30 seconds. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Image 2: Close-up of the Zippo Butane Lighter Insert showing safety warnings.
3. Produktfunktioner
- Genuine Zippo Yellow Flame Insert with reliable flint wheel ignition.
- Produces a pressurized single flame up to 1,400°F/760°C.
- Refillable with Zippo premium butane fuel (sold separately).
- Fuel capacity: 0.9g.
- Designed to fit all Classic Zippo lighter cases. Does not fit Slim or 1935 Replica cases.
- Retains the famous Zippo "click" sound.
- Made in China to Zippo quality standards.
4. Opsætning
4.1. Installation into a Zippo Case
- Open your Classic Zippo lighter case.
- Fjern den eksisterende indsats fra etuiet.
- Insert the Zippo Butane Lighter Insert into the Zippo case. Ensure it fits snugly.
- Close the lighter case.
4.2. Påfyldning af butanbrændstof
The Zippo Butane Lighter Insert is shipped unfilled. For optimal performance, use Zippo premium butane fuel.
- Fjern indsatsen fra Zippo-etuiet.
- Locate the refill valve on the bottom of the insert (refer to Image 3).
- Hold indsatsen på hovedet.
- Press the nozzle of the butane fuel can firmly into the refill valve.
- Hold for approximately 5-10 seconds, or until the insert begins to frost, indicating it is full.
- Vent et par sekunder, indtil brændstoffet stabiliserer sig, før du forsøger at antænde det.
Image 3: The bottom of the Zippo Butane Lighter Insert, highlighting the butane refill port and flame adjustment screw.
Vigtig: Before refilling, it is recommended to purge any residual air from the insert. To do this, use a small tool (like a pen tip) to press down on the refill valve until no more gas is audibly escaping.
5. Betjeningsvejledning
5.1. Tænding
- Åbn Zippo-lighterens etuiet.
- Press the ignition button (flint wheel mechanism) to ignite the yellow flame.
- Slip knappen for at slukke flammen.
Image 4: A hand demonstrating the ignition of the Zippo Butane Lighter Insert, showing the yellow flame.
5.2. Flammejustering
The flame height can be adjusted using the screw located on the bottom of the insert (refer to Image 3).
- Use a small flathead screwdriver or similar tool.
- Turn the screw towards the '+' symbol for a larger flame or towards the '-' symbol for a smaller flame.
6. Vedligeholdelse
- Kontroller jævnligt brændstofniveauet og påfyld efter behov.
- Keep the insert clean and free from debris to ensure proper operation.
- Store in a cool, dry place away from direct sunlight and heat.
7. Fejlfinding
7.1. Lighter Fails to Ignite or Flame is Weak
- Low Fuel: Check the butane level and refill if necessary (refer to Section 4.2).
- Air in Tank: Purge any air from the fuel tank before refilling (refer to Section 4.2).
- Flammejustering: Ensure the flame adjustment is not set too low (refer to Section 5.2).
- Worn Flint: Replace the flint if it is worn down and not producing a spark.
7.2. Flame is Too Large or Unstable
- Flammejustering: Adjust the flame height to a lower setting (refer to Section 5.2).
8. Specifikationer
| Mærke | Zippo |
| Modelnummer | 65800 |
| Farve | Gul Flamme |
| Materiale | Zink |
| Stil | Butan |
| Varens vægt | 1.6 ounce |
| Brændstoftype | Liquefied Petroleum Gas |
| Produktdimensioner | 2 cm L x 1.4 cm B x 0.5 cm T |
| UPC | 191693658002 |
| Fabrikant | Zippo Manufacturing Company |
| Inkluderede komponenter | Unfilled lighter insert, instruction manual |
9. Garanti og support
This Zippo Butane Lighter Insert comes with a 2-year warranty. For warranty claims or further support, please contact Zippo Manufacturing Company directly.
Besøg Zippo Store for mere information og produkter.
10. Produktet er slutview Video
Watch this official video from Zippo Manufacturing Company for a visual overview of Zippo Lighter Inserts, including the Yellow Flame Butane option.
Video 1: Official Zippo Lighter Inserts overview, demonstrating various insert types and their features.
