Indledning
The Zippo Butane Double Flame Insert is designed to enhance your Zippo lighter experience. This insert provides a clean, odorless double torch flame, offering a reliable heat source. It is engineered to fit seamlessly into any regular Zippo lighter case, excluding Slim or 1935 Replica cases. For optimal performance, use Zippo butane fuel.

Image: Zippo Butane Double Flame Insert, shown outside a lighter case.
Vigtige sikkerhedsoplysninger
- Forsigtighed: Please do not touch the flame.
- Opbevares utilgængeligt for børn.
- Må ikke udsættes for temperaturer over 120°F (49°C).
- Må ikke punkteres eller brændes.
- Ensure the flame is extinguished before closing the lighter case.
Setup and Refilling Instructions
The Zippo Butane Double Flame Insert is shipped unfilled. Follow these steps to install and refill your insert:
- Remove Insert: Carefully remove the butane insert from its packaging or existing lighter case. When removing, place your index finger and thumb on either side of the insert, below the chimney.
- Prepare for Refill: Flip the insert upside-down. The filling valve is located at the bottom right side of the insert.
- Refill with Butane: Place the butane fuel nozzle into the filling valve. Fill for approximately 6 seconds. Use only Zippo butane fuel for optimal performance.
- Indsæt i sag: Once refilled, carefully slide the butane insert into your regular Zippo lighter case. Ensure it fits snugly.

Image: Visual guide for refilling the Zippo Butane Lighter Insert and adjusting the flame.
Betjeningsvejledning
- Tænding: Open the lighter case. Press the ignition button to deploy the double blue flames.
- Flammejustering: An adjustable flame dial is located on the end of the insert. To adjust the flame height, flip the butane insert upside down. Use a paper clip or a small screwdriver (like a dime) to twist the screw left or right. The positive (+) sign indicates a larger flame, and the negative (-) sign indicates a smaller flame.
- Slukning: Release the ignition button to extinguish the flame. Close the lighter case.

Image: A hand holding a Zippo lighter with the double blue butane flames ignited.
Opretholdelse
- Rensning: Avoid direct contact with water. If necessary, wipe clean only with a damp klæde.
- Brændstof: For optimum performance, always fill with Zippo butane fuel.
- Opbevaring: Opbevares på et køligt, tørt sted væk fra direkte sollys.
Fejlfinding
If you encounter issues with your Zippo Butane Double Flame Insert, consider the following:
- No Flame/Weak Flame:
- Check butane fuel level and refill if necessary.
- Ensure the flame adjustment dial is not set too low. Adjust as per "Operating Instructions."
- Inkonsekvent tænding:
- Ensure the ignition mechanism is clean and free of debris.
- Verify that the insert is properly seated in the Zippo case.
- For further assistance, please contact Zippo customer support.
Specifikationer
| Produktdimensioner | 2.05 x 1.42 x 0.43 tommer |
| Vægt | 1.76 ounce |
| Modelnummer | 2006813 |
| Brændstoftype | Butan |
| Flammetype | Double Torch |
| Brændstofkapacitet | 0.9g (up to 60 5-second lights per fill) |
| Max flammetemperatur | 1,260°C |
| Kompatibilitet | Fits all regular Zippo lighter cases (excluding Slim or 1935 Replica cases) |
Garanti og support
Zippo Butane Lighter Inserts are backed by a 2 års garanti og en 30-dages pengene-tilbage-garanti. Zippo products are known for their durability and reliability.
If you have any questions or are not satisfied with your product, please contact Zippo customer service or visit their webwebsted: www.zippo.de.
Always treat Zippo products with care and love.





