Flushmate M-101526-F3BK Sloan Flushmate 501-B Series Pressure-Assist Toilet Tank System Manual

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Flushmate M-101526-F3BK Sloan Flushmate 501-B Series Pressure-Assist Toilet Tank System. This system is a complete pressure-assist flush unit designed as a replacement for 500, 501, 501-A, and 501-B series Flushmate systems in toilet tanks with a flush handle. It is crucial to understand that Flushmate systems are not compatible with gravity-type toilets and cannot be used to retrofit a standard toilet.

Sikkerhedsoplysninger

Always turn off the water supply to the toilet before beginning any installation or maintenance.
Brug passende personlige værnemidler, såsom handsker og øjenbeskyttelse, under installation og vedligeholdelse.
Ensure the toilet tank is completely drained before removing or installing components.
Do not attempt to modify the Flushmate system. Use only genuine Flushmate replacement parts.
Hvis du er usikker på et trin, skal du kontakte en kvalificeret VVS-installatør.

Pakkens indhold

The Flushmate M-101526-F3BK system typically includes the following components:

Flushmate Pressure-Assist Vessel (1.6 GPF)
Lower Supply Nut
Tankmøtrik
Håndtagsudskiftningssæt
2-in-1 Discharge Nut Wrench

Installationsvejledning

This Flushmate system is designed as a direct replacement for existing Flushmate 500, 501, 501-A, and 501-B series units. It is not intended for retrofitting gravity-fed toilets. Ensure the serial number of your old Flushmate tank matches the required format (e.g., XXXXXX-F31A-XXXX) and corresponds to the correct china manufacturer.

Sluk for vandforsyningen: Locate the water shut-off valve behind the toilet and turn it clockwise until the water supply is completely off. Flush the toilet to drain the tank.
Disconnect Water Line: Disconnect the water supply line from the bottom of the toilet tank. Have a bucket and towel ready to catch any residual water.
Remove Old Flushmate Unit:
- Remove the toilet tank from the bowl if necessary for access.
- Unscrew the tank nuts securing the Flushmate vessel to the toilet tank.
- Carefully lift and remove the old Flushmate unit from the tank.
Install New Flushmate Unit:
- Position the new Flushmate M-101526-F3BK vessel inside the toilet tank.
- Secure the vessel using the provided tank nut and lower supply nut. Ensure a snug fit to prevent leaks, but do not overtighten.
- Install the new handle replacement kit, connecting it to the Flushmate system's flush mechanism. Note that the flush handle screw often has a left-hand thread.
Reconnect Water Line: Reconnect the water supply line to the new Flushmate system's inlet.
Restore Water Supply & Test: Slowly turn on the water supply valve. Allow the tank to fill. Check for any leaks around the connections. Flush the toilet several times to ensure proper operation and adjust the cartridge if necessary for optimal flushing.

Flushmate M-101526-F3BK Sloan Flushmate 501-B Series Pressure-Assist Toilet Tank System installed inside a toilet tank. — This image shows the Flushmate M-101526-F3BK pressure-assist system positioned within a toilet tank. The black vessel is visible, along with its connection points and the flush handle mechanism.

Betjeningsvejledning

To operate the Flushmate M-101526-F3BK system, simply press down on the flush handle. The pressure-assist system will release water with force, ensuring an efficient flush. Release the handle once the flush cycle begins.

Opretholdelse

Rensning: The enclosed design of the Flushmate system helps keep the inside of the toilet tank clean. If cleaning is required, turn off the water supply, drain the tank, and carefully remove the Flushmate unit. Clean the tank interior with a mild cleaner and soft brush. Avoid abrasive cleaners or harsh chemicals that could damage the Flushmate unit.
Inspektion: Periodically inspect the water supply connections and the Flushmate unit for any signs of wear, damage, or leaks.
Kemikalier: Do not use in-tank chemical bowl cleaners, as these can damage the Flushmate system components and void the warranty.

Fejlfinding

Problem	Mulig årsag	Løsning
Toilettet skyller ikke ud eller skyller svagt.	Water supply is off or restricted. Flush handle linkage is disconnected or jammed. Cartridge adjustment is incorrect.	Sørg for, at vandforsyningsventilen er helt åben. Check and reconnect the flush handle linkage. Adjust the cartridge for proper operation.
Toilettet kører kontinuerligt eller tænder og slukker cyklusser.	Flush handle linkage is sticking or misaligned. Water inlet valve issue.	Inspect the flush handle linkage, especially the white tab, for proper alignment and movement. Adjust as needed. Consult Flushmate support or a plumber if the issue persists after checking linkage.
Vand siver fra tanken.	Loose connections at the supply nut or tank nut. Damaged seals or vessel.	Spænd forbindelserne (overspænd ikke). Inspect seals and the vessel for cracks or damage. Replace if necessary.

Specifikationer

Modelnummer: M-101526-F3BK
Mærke: Flushmate
Skyllevolumen: 1.6 gallon pr. skyl (GPF)
Materiale: Ceramic (toilet tank), Acrylonitrile Butadiene Styrene (ABS) (Flushmate vessel components)
Farve: White (toilet tank)
Varens vægt: Cirka 9.9 pund (4.5 kilogram)
Produktdimensioner: Approximately 1 x 1 x 1 inches (Flushmate unit dimensions may vary slightly)
Installationstype: Designed for Floor Mounted toilets equipped with Flushmate systems.
UPC: 064871410030

Garanti og support

For specific warranty information, please refer to the documentation included with your product or visit the official Flushmate website. For technical support, replacement parts, or further assistance, please contact Flushmate customer service directly. Using non-genuine parts or unauthorized modifications may void your warranty.