Indledning
The Ultenic TS1 is an advanced robot vacuum cleaner designed to provide comprehensive and effortless floor cleaning. Featuring a self-emptying station, powerful dual-spin mopping, and intelligent navigation, the TS1 ensures a spotless home with minimal intervention. This manual provides essential information for setting up, operating, and maintaining your Ultenic TS1 to ensure optimal performance and longevity.
Pakkens indhold
Før du begynder, skal du kontrollere pakkens indhold for at sikre, at alle dele er til stede:
Figure 1: Ultenic TS1 Package Contents
- Ultenic TS1 Robot Vacuum Cleaner
- Suction Station
- Fjernbetjening
- Wipe x 2
- Wipe Holder x 2
- Sidebørste
- HEPA filter
- Rengøringsbørste
- Støvpose
- Brugervejledning (dette dokument)
Opsætning
1. Placering af ladestation
Place the Suction Station on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the station for the robot to navigate freely. Plug the power cord into a wall outlet.
Figure 2: Robot and Suction Station Setup
2. Første opladning
Place the Ultenic TS1 robot onto the Suction Station. Ensure the charging contacts on the robot align with those on the station. The robot will begin charging automatically. For the first use, allow the robot to charge completely (approximately 5 hours) before operation.
Figure 3: Robot Recharging
3. App-forbindelse
Download the Ultenic App from your smartphone's app store. Follow the in-app instructions to connect your TS1 robot vacuum cleaner via Wi-Fi or Bluetooth. The app allows for advanced control and customization of cleaning schedules and settings.
Figur 4: App-kontrolgrænseflade
Drift
1. Rengøringstilstande
The Ultenic TS1 offers versatile cleaning modes:
- Vakuum tilstand: Til tørt snavs og støv.
- Mop -tilstand: Til vådrengøring af hårde gulve.
- Vacuum & Mop 2-in-1: Støvsuger og mopper samtidig for omfattende rengøring.
Figure 5: Vacuum and Mop 2-in-1 Function
2. Appkontrol
Use the Ultenic App to:
- Start/stop cleaning.
- Select cleaning modes and suction levels.
- Set cleaning schedules.
- View cleaning maps and history.
- Define no-go zones and virtual walls.
- Customize cleaning for specific rooms or areas.
3. Stemmekontrol
The TS1 supports smart speaker voice control. Connect your robot to compatible voice assistants (e.g., Alexa, Google Assistant) to initiate cleaning commands hands-free.
Figur 6: Stemmestyringseksempelample
4. Multi-Floor Mapping
The TS1 can effortlessly map and save up to multiple maps for different levels of your house. You can customize cleaning routines for each floor using the Ultenic App.
Figure 7: Multi-Floor Mapping
5. Forhindringsundgåelse og navigation
Equipped with NaviFree Intelligence Navigation and a built-in laser camera, the TS1 accurately identifies obstacles and scans a real-time map of your home, improving cleaning efficiency and avoiding collisions.
Figure 8: Obstacle Avoidance
6. Automatic Carpet Boost
When the TS1 detects carpet, it automatically increases suction power to the maximum for deeper cleaning in vacuum mode. In mop mode, it intelligently detours around carpets to prevent wetting them.
7. Recharging and Resuming
If the battery runs low during a cleaning cycle, the TS1 will automatically return to its Suction Station to recharge. Once fully charged, it will resume cleaning from where it left off.
Opretholdelse
Regular maintenance ensures your Ultenic TS1 operates efficiently and extends its lifespan.
1. Self-Emptying Station and Dust Bag
The self-emptying station automatically transfers collected debris from the robot's dust box into a 3L dust bag. The station also features UV light for sterilization.
Figure 9: Self-Emptying Station
- Udskiftning af støvpose: Replace the 3L dust bag in the Suction Station when it is full. The frequency depends on usage and household debris levels.
2. Mop Pads
The TS1 uses dual-spin mop pads for effective wet cleaning.
- Rensning: Remove the mop pads from their holders after each mopping session. Wash them thoroughly with water and mild detergent. Allow them to air dry completely before reattaching.
- Udskiftning: Replace mop pads every 1-3 months, or when they show signs of wear and tear.
Figure 10: Dual-Spin Mop Pads
3. HEPA-filter
The HEPA filter helps trap fine dust and allergens.
- Rensning: Tap the filter gently to remove loose debris. Do not wash the HEPA filter with water.
- Udskiftning: Replace the HEPA filter every 3-6 months, or as needed.
4. Sidebørste
The side brush sweeps debris into the robot's path.
- Rensning: Remove any hair or debris tangled around the side brush.
- Udskiftning: Replace the side brush if bristles are worn or damaged.
5. Rengøringsbørste
Use the provided cleaning brush to remove hair and debris from the main brush and other components.
Fejlfinding
If you encounter issues with your Ultenic TS1, refer to the following common problems and solutions:
- Robotten oplader ikke: Ensure the charging contacts on both the robot and the station are clean and free of debris. Verify the power cord is securely plugged into the wall outlet.
- Robot sidder fast eller er forsvundet: Clear any obstacles or tangled wires from the robot's path. If the robot is lost, manually place it back on the charging station or restart it.
- Dårlig rengøringsevne: Check and clean the main brush, side brush, and dust box. Ensure the HEPA filter is not clogged. If mopping, ensure mop pads are clean and water tank is filled.
- Problemer med app-forbindelse: Ensure your Wi-Fi network is 2.4GHz. Restart your router, robot, and smartphone. Re-pair the robot with the app if necessary.
- Overdreven støj: Check for any foreign objects caught in the brushes or wheels. Clean the dust box and filter.
For persistent issues, consult the Ultenic App for further diagnostics or contact customer support.
Specifikationer
| Feature | Specifikation |
|---|---|
| Nominel effekt | 35W |
| Voltage | 14.4V |
| Sugning | Max. 3000Pa |
| Runtime | Max 120 Mins |
| Opladningstid | ≤5 timer |
| Støjniveau | Powerful gear: ≤73dB, Standard gear: ≤68dB, Quiet gear: ≤65dB |
| Obstacle/Hall Crossing Height | ≤5 mm |
| Klatrevinkel | ≤13 Degrees |
| Vandtanktype | Electronically controlled integrated dust box vibration water tank |
| Støvkasse Kapacitet | 200 ml |
| Vandtankkapacitet | 235 ml |
| Tæppe Boost | Understøttet |
| Wet Mop Avoidance Carpet | Supported (ultrasonic testing) |
| Resume from Breakpoint | Understøttet |
| Dust Full Tips | Ikke understøttet |
| APP kontrol | Understøttet |
| Smart Speaker Voice Control | Understøttet |
| Driftsmiljøområde | Temperature: 0-40°C; Humidity: ≤75% |
| Motortype | Børsteløs motor |
| Batteri | 3200mAh |
| WiFi modul | 2.4G |
| Lasersensor | Point Lidar |
| Feature | Specifikation |
|---|---|
| Nominel effekt | 1050W |
| Nominel input | 220-240V AC, 50/60Hz |
| Nominel output | 1A |
| Sugekraft | 22KPa |
| Støvposekapacitet | 3L |
Brugertips
- For best mopping results, ensure the mop pads are damp before starting a mopping cycle.
- Regularly check and clear any small objects, cables, or loose rugs that might obstruct the robot's path to prevent it from getting stuck.
- Utilize the Ultenic App's mapping features to set specific cleaning zones or no-go areas for tailored cleaning.
- Clean the robot's sensors periodically with a dry cloth to maintain optimal navigation and obstacle avoidance.
Garanti og support
The Ultenic TS1 Robot Vacuum Cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Ultenic customer service through their official webwebstedet eller kontaktoplysningerne i din garantidokumentation.
