ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller User Manual

ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller

Produktinformation

Funktioner

• Kan styres af iOS-telefon/Android-telefon
• Understøtter “Smart Life” og “Tuya Smart” APP'en
• Voice control: Compatible with Alexa and Google home T mall Genie or Xiaodu speakers
• Timing funktion: Auto on/off med timing funktion
• Overbelastningsbeskyttelse for nem udskiftning af dine traditionelle mekaniske kontakter (skal have neutral)
• Smart scene
• Enhedsgruppe

Sikkerhedsoplysninger

Risk of electric shock: Electricity can cause personal injury and properly damage if not handled properly. If you are unsure of any part of these instructions, seek professional help from a qualified electrician.

Installere

Meddelelse:

• Sørg for, at strømmen på afbryderen er slukket, før ledningsføring.
• Neutral wire is required. Verify that the wall box contains a neutral wire (usually white). If the wall box does not have a neutral wire, try another location in the home or call a professional electrician to install the switch.
• De trådfarver, der er angivet i denne vejledning, er de sædvanlige farver og kan variere i nogle huse.
• Make sure the wire conductors are securely attached to each screw.
• Sørg for, at Wi-Fi-signalet er stabilt og fungerer korrekt, før du tilslutter ledningerne.
• Hvis du ikke har erfaring med ledningsføring, bedes du kontakte en professionel elektriker.

Første trin:

• Sluk for afbryderen og test strømmen med en elektrisk tester.
• Sørg for, at kontakten er slukket før ledningsføring.

Andet trin:

• Remove existing wall panels; turn on power at breaker and use electrical tester to check which wire is the line; the tester will beep when near the line.
• Turn off the power at the circuit breaker; if there is a power outage, use an electrical tester, pull the existing switch out; mark the wiring and other wires; disconnect the power with pliers and remove the wires from the existing switch.
• Connect the switch wires to the wall box with the wire conductors according to the wiring diagram below.
• Tredje trin: Install the switch using the screws provided and snap the wall plate onto it.
• Det fjerde trin: Tænd for strømmen igen ved afbryderen, og tænd derefter lysene.

Ledningsdiagram

The Live wire is connected to the “L” terminal, The Neutral wire is connected to the “N” terminal, Lighting wire is connected to “L1, L2, L3” terminals.

1. Gang switch lighting wire connection: “L1” terminal
2. Gang switch lighting wire connection: “L1,L2” terminals
3. Gang switch lighting wire connection: “L1,L2,L3” terminals

Tilføj enhed

Add device to “Smart Life” or “Tuya Smart” APP

1. Step 1: Download and install the “Smart Life” or “Tuya Smart” APP: Scan the QR code below
   
2. Step 2: Enter the phone settings option, turn on the Bluetooth and WiFi functions, and turn on the product at the same time
3. Trin 3: Åbn Smart Life-appen, registrer dig og log ind på din konto. Hvis du har en Smart Life-konto, skal du blot logge ind.
4. Step 4: Power on after the wiring is completed, the device is powered on by default, press and hold the touch wall switch button for about 8, until the WiFi blue LED flashes quickly, enter the network configuration mode
5. Step 5: Enter the App, click the “+” at the top right of the page to enter the network connection page.
6. Step 6: Make sure your device’s light is blinking quickly(2 times per second) tap to proceed to the next steр.
7. Step 7: Enter your WiFi and password
8. Trin 8: Navngiv din enhed.
9. Step 9: When the WiFi LED is on, the device is online.
   Tag kontrol nu!

How to use smart speakers to control devices, such as Amazon Alexa, Google Assistant or T mall Genie?
Åbn Smart Life-appen for at gå ind i "Mig"-feltet. view and find the user Quide for “Me” view and find the user guide the corresponding smart speaker

【Note: Before using the smart speaker, please log in to your account on Amazon Alexa Google Assistant, or T mall Genie.]

Introduktion til RF-fjernbetjening

Packaged products are paired at the factory and do this wirelessly. If you need to add or replace the remote control switch, please refer to the following steps

Parringsmetode
Press and hold the touch wall switch button for about 3 seconds. The red LED indicator lights up to enter the RF433 pairing mode. At this time, press the RF433 remote control switch a few times and the indicator light flashes off. The switch is controlled and paired successfully.

Kode clearing metode

Long press the touch wall switch button for 5 seconds until the red LED indicator flashes 3 times, the code is cleared successfully.