ThinkNode G3 LoRaWan-gateway
Produktbrugsvejledning
Enhedsdele
- Reload Button
- Type-C-port: 5V/1A
- Ethernet Port (10Mbps/100Mbps)
- SIM Card Socket (Only 4G Version)
- LINK Status LED
- LoRa Status LED
- PWR Status LED
- LoRa antenne
- 4G Antenna (Optional)
Product LED Status
- When the device is powered on, the red LED remains solid.
- During data transmission, the blue LED blinks.
- After the device is connected to Wi-Fi or Ethernet, the green LED remains solid.
Reservedelsliste
- ThinkNode-G3 x1
- LoRa antenna x1
- 4G antenna (Only 4G Version) x1
- USB-A to USB-C data cable x1
- Base x1
- Skrue x3
- Brugervejledning x1
Wi-Fi Setup Steps
- Power on the device, press and hold the Reload button for 5 seconds, then release. The device will enter the gateway configuration mode, and the green LED(LINK) will blink. Use a computer to connect to the gateway’s Wi-Fi network.
(ThinkNode-G3_xxxxxx),With the password: 88888888. - Open a browser and enter 192.168.4.1 to access the gateway configuration page:
- NET MODE: WIFI
- WIFI SSID: Enter the Wi-Fi name you want to connect to (non-5GHz Wi-Fi network)
- WIFI PASS: Enter the password for the Wi-Fi network you want to connect to
- Gateway ID: xxxxxxffffexxxxx
- SERVER ADDR: eu1.cloud.thethings.network (default)
- SERVER PORT: 1700 (default)
- REGION: EU868/US915/AU915 (Select according to the actual frequency band)
- CHANNEL: * (Choose according to the frequency of the connected device)
- SF: (Choose according to the frequency of the connected device)
- TIME ZONE: UTC
- Click Submit to save the configuration settings. The gateway will automatically reboot, and the green LED (LINK) will turn off temporarily, then remain solid.
Ethernet Setup Steps
- Connect the Ethernet cable to the device and power it on, press and hold the Reload button for 5 seconds, then release. The device will enter the gateway configuration mode, and the green LED(LINK) will blink. Use a computer to connect to the gateway’s Wi-Fi network (ThinkNode-G3_xxxxxx), with the password: 88888888.
- Open a browser and enter 192.168.4.1 to access the gateway configuration page:
- NET MODE: NET
- WIFI SSID:
- WIFI PASS:
- Gateway ID: xxxxxxffffexxxxx
- SERVER ADDR: eu1.cloud.thethings.network (default)
- SERVER PORT: 1700 (default)
- REGION: EU868/US915/AU915 (Select according to the actual frequency band)
- CHANNEL: * (Choose according to the frequency of the connected device)
- SF:(Choose according to the frequency of the connected device)
- TIME ZONE: UTC
- Click Submit to save the configuration settings. The gateway will automatically reboot, and the green LED (LINK) will turn off temporarily, then remain solid.
Grundinstallationstrin
Hovedspecifikationer
| Produktnavn | ThinkNode-G3 |
| Input | 5V/1A |
| Vægt | 108 g |
| Dimensioner | 75’75’30mm (excluding antenna) |
| Grænseflader | Type-C (USB), RP-SMA (LoRa/4G), RJ45 (WAN/LAN) |
| LoRa Gateway Chip | SX1262 |
| LoRa følsomhed | -125dBm @125K/SF7, -139dBm @125K/SF12 |
| LoRa TX Power | 22dBm |
| WiFi | Support 2.4 GHz 802 .11b/g/n |
| Bluetooth | Dual-Mode Bluetooth-BR/EDR+BLE 5.0 |
| Antenne | LoRa/4G: 6dBi External Antenna,
WiFi: Internal Antenna, BLE: Internal Antenna |
Ofte stillede spørgsmål
What is the ThinkNode G3 LoRaWAN Gateway?
The ThinkNode G3 is an industrial-grade LoRaWAN gateway that connects LoRa-based sensors and devices to cloud-based applications using Ethernet, Wi-Fi, or cellular (4G LTE) backhaul.
What are the supported connectivity interfaces?
The ThinkNode G3 supports:
- Ethernet (RJ45)
- Wi-Fi (2.4 GHz)
- 4G LTE (optional model)
- LoRaWAN (ISM sub-GHz)
Dokumenter/ressourcer
 |
ThinkNode G3 LoRaWan-gateway [pdfBrugermanual G3, G3 LoRaWan Gateway, LoRaWan Gateway, Gateway |