TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Specifikationer

• Model: Q103
• Kompatibilitet: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Forbindelse: Bluetooth, 2.4G Wireless, USB (Type-C)
• Working Voltage: DC 3.7V
• Arbejdsstrøm: < 30mA
• Sovestrøm: < 5uA
• Opladning Voltage/aktuel: DC 5V/500mA

Fejlfinding

• Controlleren forbinder ikke:
  • Sørg for, at controlleren er fuldt opladet.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Sørg for, at Bluetooth er aktiveret på din enhed.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Knapper reagerer ikke:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Input lag:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Minimér interferens fra andre trådløse enheder.
  • Try connecting via USB cable if available.
• Controlleren oplader ikke:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Prøv et andet Type-C-kabel eller en anden strømadapter.
  • The LED indicator should show the charging status.

Q103 Funktionsdiagram

1. D-pad knap
2. X/Y/A/B knap
3. HOME Reconnect/Power Button
4. PAIR-knap
5. SELECT-knap
6. TURBO knap
7. Venstre joystick/L3 knap
8. Højre joystick/R3 knap
9. CLEAR -knap
10. START-knap
11. L-knap
12. L2 -knap
13. Type-C opladningsport
14. R2 -knap
15. R-knap
16. Nulstil hul
17. LED
18. Mode switch

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 og nyere

Bluetooth-forbindelse

1. Vend kontakten: Skift til X for at gå ind i X- INPUT-tilstand.
2. Første brug (Power-on parring):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • LED'en er altid rød, når genforbindelsen er vellykket.
3. Brug igen (gentilslutning):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. LED'en er altid rød, når genforbindelsen er vellykket.
4. Press the PAIR button to power off the device.

SWITCH-tilstand

Bluetooth-forbindelse

1. Vend kontakten: Skift til S for at gå ind i Switch-tilstand.
2. Første brug (Power-on parring):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LED'en er altid grøn, når genforbindelsen er vellykket.
3. Brug igen (gentilslutning):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus til Android

Android 9.0 og nyere

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Første brug (Power-on parring):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Brug igen (gentilslutning):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Tryk på parringsknappen for at slukke for enheden.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Firmware opgradering

1. Tilslut V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Joystick-indstillinger

• Vippekalibrering
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Elektriske parametre

• Arbejder voltage: DC3.7V
• Arbejdsstrøm: <30mA
• Søvnstrøm: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Standbytid: 30 dage (fuldt opladet)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Sleep / Wake-up funktion:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

FCC advarsel

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Drej eller flyt modtagerantennen.
• Øg afstanden mellem udstyret og modtageren.
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

Forsigtighed: Enhver ændring eller modifikation af denne enhed, der ikke udtrykkeligt er godkendt af producenten, kan annullere din ret til at betjene dette udstyr.
Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage skadelig interferens, og
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Dette udstyr overholder FCC's grænseværdier for strålingseksponering, der er fastsat for et ukontrolleret miljø. Dette udstyr skal installeres og betjenes med en minimumsafstand på 0 cm mellem radiatoren og din krop.