SYNCMIC Ai Mini Printer Instruction Manual

SYNCMIC Ai Mini Printer

Nøgleintroduktion

Power button: Press and hold for 3 seconds to turn on/off the device.

AI-knap:

1. Long press to trigger the generation of a visual effect based on the sound, short press to return to the style mode.
2. Click to switch the style mode.
3. Double-click to print the APP QR code.

Print button: Press briefly after generating the image to start the printing process.
Reset hole: If the device freezes and cannot be powered on, you can use a sharp object to rub it.

APP Download &Device Connection Steps

Download APP'en

1. Method 1: Scan the QR code below and follow the on-screen instructions to download the corresponding App;
2. Metode 2: Søg efter “Friend Al” in the official app storeon your mobile device, then download and install the app. IPhone: Open the App Store, search “Friend Al” and  install ;Android: Open your app store or Google Play, search “Friend Al” and install.

((Note: 5G WiFi is not currently supported)

Opret indhold
Hold down the [Ai] key to talk – Create content. After the network is successfully set up, the page displays the words “Press to talk” .At this time, you can press and hold the [Ai] button at the top of the device for a creative experience. For example: “Print a of a little dog running in the field”.Specific operation: press and hold the [Ai] key with out releasing it – speak the command – release the key after the command, and the print will be displayed.

Batteriadvarsel

1. Brug venligst 5V oplader til at oplade i henhold til specifikationen for at undgå skader på maskinen.
2. Demontering, slag, ekstrudering eller brand er forbudt;
3. Hvis der opstår en alvorlig udbuling, må du ikke fortsætte med at bruge;
4. Må ikke placeres i omgivelser med høj temperatur, batteri efter nedsænkning er forbudt at bruge;
5. Udskiftning med den forkerte type batteri kan være eksplosiv. Sørg for at følge instruktionerne for bortskaffelse af brugte batterier.

Sager, der kræver opmærksomhed

1. When charging, please gently insert or unplug the charging cable to prevent excessive force from damaging the port;
2. After charging, please unplug the charging calebin time;
3. To avoid danger, do not use or charge IN environments with hightemperature, high humidity ,excessive smoke and dust, such as: bathrooms, steam rooms, open flames, etc.;
4. Improper charging may cause damage to the printhead;
5. Do not touch the print head to prevent overheating and burns;
6. The tearing blade is sharp, be careful not to touch it.

FCC opvarmning:

Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage skadelig interferens, og
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Ændringer eller modifikationer, der ikke udtrykkeligt er godkendt af den part, der er ansvarlig for overholdelse, kan annullere brugerens ret til at betjene udstyret.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Drej eller flyt modtagerantennen.
• Øg afstanden mellem udstyret og modtageren.
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

RF-advarsel for bærbar enhed:
Enheden er blevet vurderet til at opfylde generelle krav til RF-eksponering.
Enheden kan bruges i bærbar eksponeringstilstand uden begrænsninger.