SpiderControl AutomationBrowser Android Touch Panel Brugsanvisning

SpiderControl AutomationBrowser Android Touch Panel Brugsanvisning

Licensaftale

LÆS VILKÅRENE I DENNE AFTALE OG EVENTUELLE LEVEREDE SUPPLERENDE LICENSVILKÅR (SAMLET "AFTALE") OMHYGGELIGT, FØR DU ÅBNER SOFTWAREMEDIEPAKKEN. VED AT ÅBNE SOFTWAREMEDIEPAKKEN ACCEPTERER DU VILKÅRENE I DENNE AFTALE. HVIS DU IKKE ACCEPTERER ALLE DISSE VILKÅR, SKAL DU OMGÅENDE RETURNERE DEN UBRUGTE SOFTWARE TIL KØBSSTEDET.

1. BRUGSLICENS
ININET GIVER DIG EN IKKE-EKSKLUSIV OG IKKE-OVERDRAGSBAR LICENS BEGRÆNSET TIL INTERN BRUG AF DEN MEDFØLGENDE SOFTWARE OG DOKUMENTATION SAMT ENHVER FEJLRETTELSE LEVERET AF ININET SOLUTIONS GMBH (SAMLET "SOFTWARE").

2. GÆLDENDE LOV
DENNE AFTALE ER UNDERLAGT LOVGIVNINGEN I KANTON BASELLAND, SCHWEIZ.

3. GARANTIANSVARSFRASKRIVELSE
DENNE SOFTWARE OG DEN MEDFØLGENDE FILESÆLGES "SOM DE ER" OG UDEN GARANTI FOR YDELSE ELLER SALGBARHED ELLER ANDRE GARANTIER, HVERKEN UDTRYKKELIGE ELLER UNDERFORSTÅEDE. PÅ GRUND AF DE FORSKELLIGE HARDWARE- OG SOFTWAREMILJØER, HVOR ININET-LØSNINGER KAN BLIVE INSTALLERET I, GIVES DER INGEN GARANTI FOR EGNETHED TIL ET BESTEMT FORMÅL. GOD DATABEHANDLINGSPROCEDURE KREVER, AT ETHVERT PROGRAM SKAL GRUNDIGT TESTES MED IKKE-KRITISKE DATA, FØR MAN STOLER PÅ DET. BRUGEREN SKAL PÅTAGE SIG HELE RISIKOEN VED AT BRUGE PROGRAMMET. SÆLGERS ANSVAR VIL UDELUKKENDE VÆRE BEGRÆNSET TIL PRODUKTUDSKIFTNING ELLER REFUSION AF KØBSPRISEN.

4. BEGRÆNSNINGER
SOFTWARE ER FORTROLIG OG OPHAVSRETTIG. EJENDOMSRETTEN TIL ENHVER SOFTWARE OG ALLE TILHØRENDE INTELLEKTUELLE EJENDOMSRETTIGHEDER BEHOLDER ININET SOLUTIONS GMBH OG/ELLER DENS LICENSGIVERE. DU MÅ IKKE LAV KOPIER AF SOFTWARE BORTSET AF EN ENKELT KOPI AF SOFTWAREN TIL ARKIVFORMÅL. DU MÅ IKKE ÆNDRE, DEKOMPILERE OG REVERSE ENGINEER-SOFTWAREN. SOFTWARE ER IKKE DESIGNET ELLER LICENSERET TIL BRUG I ONLINEKONTROL AF FLY, LUFTTRAFIK, FLYNAVIGATION ELLER FLYKOMMUNIKATION; ELLER I DESIGN, KONSTRUKTION, DRIFT ELLER VEDLIGEHOLDELSE AF NOGEN NUKLEAR ANLÆG. DU GARANTERER, AT DU IKKE VIL BRUGE SOFTWARE TIL DISSE FORMÅL.

5. BEGRÆNSNING AF ANSVAR
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ININET SOLUTIONS GMBH OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF ININET SOLUTIONS GMBH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN NO EVENT WILL ININET SOLUTIONS GMBH’S LIABILITY TO YOU, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE, EXCEED THE AMOUNT PAID BY YOU FOR SOFTWARE UNDER THIS AGREEMENT. THE FOREGOING LIMITATIONS WILL APPLY EVEN IF THE ABOVE STATED WARRANTY FAILS ITS ESSENTIAL PURPOSE.

6. OPSIGELSE
THIS AGREEMENT IS EFFECTIVE UNTIL TERMINATED. YOU MAY TERMINATE THIS AGREEMENT AT ANY TIME BY DESTROYING ALL COPIES OF SOFTWARE. THIS AGREEMENT WILL TERMINATE IMMEDIATELY WITHOUT NOTICE FROM ININET SOLUTIONS GMBH IF YOU FAIL TO COMPLY WITH ANY PROVISION OF THIS AGREEMENT.
UPON TERMINATION, YOU MUST DESTROY ALL COPIES OF SOFTWARE.
Windows 10 is a registered trade mark of Microsoft Inc.
Mac OS is a registered trade mark of Apple Inc.
Pentium is a registered trade mark by Intel Inc.
CODESYS is a registered trade mark of CODESYS GmbH

Forkortelser

Installation

Installation på dit Android-berøringspanel
Åbn denne side på din Android-enhed med en standard web browseren, og klik på droid-ikonet.
Download SpiderControl Automation Browser (Åbn linket ovenfor)
Når download er færdig, skal du åbne APK'en file stored in your Download folder and follow instructions to complete the installation.
Note: Some authorizations can be asked to allow the installation of an APK file ud af den officielle butik.

Til industrielt berøringspanel
If you wish the Automation Browser to be the main app of your device, then Automation Browser Home Screen edition is the right choice.
It will automatically start on reboot and every time you press the Home button it will show the app again.
Download SpiderControl Automation Browser (Åbn linket ovenfor)
After installation, when you press the Android Home button, you will be asked to choose for the default launcher(*). Press the Home button again to see the ALWAYS option.
Once you have chosen the Automation Browser (ALWAYS), it will automatically be launched on the next start and you will not see the default Android Home screen anymore! To give you the choice again, you will have to clear the “Open defaults” setting in the Automation Browser app Open the Android Settings (app menu in the top right corner) and depending on the Android version you will have to go Apps > Automation Browser > Open by default > CLEAR DEFAULTS
Storage & USB > Apps > Automation Browser > (i) icon > Open by default > CLEAR DEFAULTS
Then, press on the Android Home button again.

(*) Hvis du ikke ser pop op-vinduet, hvor du skal vælge standardstarteren, skyldes det sandsynligvis, at en anden starter allerede er valgt som standard. I så fald skal du rydde indstillingerne for "Åbn standardindstillinger" i den aktuelle starter-app. Appens navn er ofte noget i retning af "Launcher" eller "Google Now Launcher", ...

Why the Automation Browser?

Kort resumé
Support Panel Operation, Kiosk Mode
One Browser always works, also with legacy HMI which is no longer supported in standard Browser
Easy application installation, setup and maintenance
The user is restricted to the desired URL
The user has a list of all available PLC’s/servers
No exit to OS level, but allow for certain OS configurations (e.g. IP address)
Interact with additional input devices: On-Screen-Keyboard, RFID, Scanner
Have a better performance with CODESYS V3.x clients even on slower HW
Allow for remote controlled functions: PLC can switch on light on panel
Involve and control other programs on panel without leaving the UI context
Offer a platform for I4.0/IIoT integration which can be used by factory level staff (no IT pro’s needed)

Detaljeret beskrivelse

Web-based HMIs are today standard in automation for operation and monitoring. Through the available browsers – on a wide variety of devices – Web technologies offer a high degree of simplification and modularity in the development of graphical user interfaces. The same technology also allows operation in the operator panel, on the PC, smartphone or tablet. But: so far, so good – where are still unresolved problems today?
Web-baserede HMI'er kan nemt gemmes direkte på controllere, fordi integrerede indlejrede Web servers are available almost everywhere today.
A currently major obstacle are older Web HMI'er, som bruges på mange installerede controllere, der er baseret på Java-applets og ikke længere understøttes af populære browsere. Disse omfatter f.eks.ampCODESYS Webvisu V2.x or even older SpiderControlTM OEM versions on PLC by Phoenix Contact, SAIA-Burgess, Panasonic and many more.

Another problem will arise when you have several automation systems in one system and the operator station has to jump back and forth between the various Web servere, så operatøren endda kan se alle relevante oplysninger der. Fra et teknisk synspunkt view, dette er ikke et problem. For at skifte fra én server til en anden, skal den gemte URL linket vil fungere. I praksis kan dette dog være komplekst og ofte problematisk. Det betyder, at du skal indbetale det mulige URL springer i HMI'erne og på alle Web servere på forhånd. Det er også en betydelig indsats, og i nogle tilfælde er det slet ikke muligt, hvis Web HMI blev udviklet af en tredjepart. Et andet problem vil være login-funktionerne.

Usually there are several user levels
in an operation for which one has to identify first. But if you jump from one Web server til en anden, går disse oplysninger tabt, og loginproceduren starter forfra. Et andet vigtigt problem er pop op-meddelelser, der straks skal vises til brugeren, hvis der er et problem med systemet. Men hvis dette sker, mens panelet viser HMI fra en anden Web server, the user does not get this error. The Spider Control TM Automation Browser by iniNet Solutions is developed to solve this problems and contains also other useful functionalities for automation. For example a so-called station list can be created directly in the Automation Browser, in which all connected controllers are stored with their URLDenne liste kan vises når som helst, selvom browseren i øjeblikket befinder sig på en HTML-side i en controller. Det er ikke nødvendigt at foretage ændringer i eksisterende Web HMIs of controllers. The difference to a „favorites“ list – as well known from a conventional browser: as the browser on the panel is expected to operate in „kiosk mode“ (full screen), it cannot access all normal functions of the browser menu. Only the station selection and, if necessary, a “back” button will be displayed. Also, the station list can be displayed in a touch-screen-friendly, large format in order to increase the user-usability. This start page can even be customized by a programmer. To solve the problem of compatibility with older web HMIs, several browsers have been integrated into Automation Browser. Invisible to the user, the Automation Browser simply selects the right viewaf sig selv, hvilket gør det nemt at integrere ældre Web visualizations like CODESYS V2..

Første skridt

Efter den vellykkede installation vises følgende vindue:

The Automation Browser contains MicroBrowser and Chromium

The MicroBrowser is able to display

• Alle Web-HMI which are designed with SpiderControl PC HMI Editor or an OEM version of it
• CODESYS WebVisu V2.3
• CODESYS WebVisu V3.x

For all other content, the Automation Browser will use the integrated Chromium HTML5 Web-Client.

When opening an URL, the Automation Browser will first analyze the HTML page and then open automatically either the MicroBrowser or Chromium (when in Auto Mode). Older SpiderControl HMI projects as well as the CODESYS Webvisu V2.3 used Java Applets, which are no longer supported in any Browser. The MicroBrowser is able to display these HMI without a Java VM by using a native implementation.

CODESYS Webvisu V3.x can be visualized both with the MicroBrowser as well as with Chromium HTML5. The MicroBrowser offers better performance as well as other possibilities, so for this type of HMI the AutomationBrowser will open Chromium when in Auto-Mode or the MicroBrowser when forced to MicroBrowser Mode.

When you display a newer HTML5 based Spider Control HMI, the Auto mode will open the MicroBrowser, but you can force it to use Chromium by selecting the HTML5 mode.

Hovedmenu (øverst til højre 3 prikker)

Andoid Setttings:
Gå ind i Android-indstillinger for at ændre IP-adresse og andre netværksrelaterede parametre. Dette er nyttigt, når AutomationBrowser er i startskærmtilstand, og brugeren ikke har adgang til andre apps.

Fuld skærm:
Fuld skærm bruges kun til at fjerne statuslinjen øverst på skærmen.

Immersive-Mode:
Immersive-tilstand bruges til at fjerne både statuslinjen og proceslinjen nederst på skærmen (gendan proceslinjen ved at swipe opad fra bunden af ​​skærmen)

Navigationslinje:
Dette bruges kun i HTML 5-tilstand til at vise en kontrollinje øverst på skærmen, til at navigere med forrige og næste knapper, til at opdatere view eller at komme tilbage i hjemmet view

Auto-scale:
– Mikrobrowser: Den view vil automatisk blive omskaleret, så det passer til skærmen (isotropisk, beholder bredde/højde-forholdet)
– HTML 5: Det er ikke rigtigt omskaleret på view, da det afhænger af HTML-siden. Men det vil aktivere en mulighed for WebView kontrol, så den passer til skærmen.

Pan & Zoom:
– MicroBrowser: Aktiver/deaktiver panorering og zoom af view.
– HMTL 5: Unused, this option is handled in the HTML code

Anti-Alias:
– MicroBrowser: Forbedr renderingen med anti-alias, hvis enheden ikke allerede understøtter denne funktion i hardwareacceleratoren. På de fleste enheder behøver vi ikke at aktivere denne indstilling.
– HTML 5: Ubrugt

Android Keypad:
– MicroBrowser: Vis enten Android-tastaturet for at redigere en værdi, eller brug tastaturet/alfabet-TEQ files
– HTML 5: Ubrugt

Keep Screen ON
Hold skærmen tændt, når du er forbundet til målet, i MicroBrowser/HTML5/VNC/Video view

Clear Cache in HTML5
Rydder HTML5-cachen ved hver forbindelse til målet

Ekstern opbevaring
Hvis den er aktiveret, gemmer den alle files på det første SD-kort/USB-disk, der findes, i stedet for at bruge intern lagring

Eksportere:
Eksporter stationslisten til Download/AutomationBrowser/MB_STATION.xml

Rul ned i menulisten for mere…

Importere:
Importer stationsliste fra Download/AutomationBrowser/MB_STATION.xml

PIN-kode:
PIN code is used to prevent any modification from operator user. The password is needed to change anything. This feature allows for locking up the operator panel to avoid a user to modify settings or to exit the App (‘Kiosk Mode)

Log File
Generer en logfil file /Download/AutomationBrowser/automb_log.txt

Open the Manual
Åbn dette dokument i PDF-filen viewer

Tæt:
Luk menuen

Udvidelse af AutomationBrowser

Den version, du har installeret indtil videre, dækker den grundlæggende funktionalitet. Hvis du har brug for en tilpasset funktionalitet, kan AutomationBrowser udvides med SpiderPLC-komponenterne. I det følgende præsenterer vi to eksempler.ampoplysninger om sådanne udvidelser. Hvis du har et program, der kan løses ved hjælp af denne fremgangsmåde, bedes du kontakte os.

AutomationBrowser with seamless navigation from PLC to camera
The SpiderControl AutomationBrowser allows for a seamless navigation from a HTML5 Webvisu på en PLC til en web-kamera, som er direkte forbundet med dets H264 / rtsp:// URL (som understøttes af næsten alle webcam). A fully customized user interface in the control panel offers the option of providing a self-contained, consistent operation.

AutomationBrowser with programmable logic to jump, block touch and switch backlight
The SpiderControl AutomationBrowser can be programmed with an integrated functional block logic to force a jump to a specific URL, for at blokere berøringsskærmen eller for at tænde/slukke baggrundsbelysningen. Den integrerede SpiderPLC kan programmeres med enhver standardbrowser og forbindes til en ekstern PLC ved hjælp af standardprotokoller som OPC UA, Modbus, ISO-on-TCP og mere. Som denne, en Web-Panel kan bruges til at vise flere Web-HMI’s, but still be controlled by a connected PLC.

HTTP/HTTPS
Automation Browser understøtter både http og https URL, med eller uden legitimationsoplysninger.
http://[user:password@]hostname/…
https://[user:password@]hostname/…

Hvis legitimationsoplysninger ikke er angivet i URL and the server prompts for HTTP authentication, it will show an authentication dialog, to enter the username and password.
If you choose “Save Password” in this dialog, it will still show the authentication dialog the next time, to allow the user to use the stored information or enter another username/password.
If credentials are specified in the URL, the HTTP authentication dialog will not be displayed, unless the credentials are wrong.
In that case, you will have to update or clear the credentials from the URL.

If the server uses as untrusted SSL certificate or self-made certificate, the user will be prompted to accept it and continue loading the page, or not.
Press YES (ALWAYS) to permanently save your choice.
Press CLEAR DATA in the Android Settings of the app, to restore the default settings and clear all stored credentials.

VNC URL
VNC URL er noget i retning af vnc://192.168.1.123/
vnc://hostname[:port]/[bpp[.depth]]/[password]

Valgfri parametre:

• port, default is 5900
• bpp is either 8, 16 (565) or 32 (888), 0 use default parameter from server
• depth is optional and depends on the bpp. Supported values are 16.15 (555), 8.6 (64 colors) or 8.3 (8 colors)
• password if need must be defined after the pixel format, to use default pixel format, use bpp 0
• If supported on the VNC server side, the best choice is 16 bpp (565), for example vnc://192.168.1.2/16/password

Bemærkninger:

• A Floating Button is used to open and close the Android Keypad,
• The Floating Button is visible only if Android Keypad option is enabled in the menu.
• A long press on the Floating Button moves the button.
• The Auto-Start in MicroBrowser mode is recommended to be used instead of Auto detection
• If the connection is lost and the Auto Start is defined with a delay (3s or more), it will return to the countdown page

RTSP URL for video streaming
rtsp://[user:password@]hostname/[live0][?caching=MILLISECONDS]
Depending on the camera you will have to specify /live0, /live1, … or something like that, after the hostname
The optional network caching parameter in the rtsp URL, allows you to reduce the latency from the live stream, but may cause artifacts or refresh issues if the parameter is too short
The default value is 200 ms, for example, to set 50 ms
rtsp://192.168.1.123/live0?caching=50

Auto-Start mode
* Uden nedtælling (start med det samme)

• Auto start with auto detection will shortly show the setup page and open either the MicroBrowser or HTML5 view
• Auto start with MicroBrowser will directly jump to the MicroBrowser if the server is reachable (*)
• Auto start with HTML5 will directly jump to the WebView, hvis serveren er tilgængelig

(*) Hvis serveren ikke kan nås, eller hvis forbindelsen afbrydes, springer den til opsætningssiden.
* Med en nedtælling på N sekunder (Autostart 3s, 10s, 15s, 30s, 45s, 60s, 90s eller 120s) ved opstart

1. Auto start with auto detection will shortly show the setup page and either open the MicroBrowser or HTML5 view after a delay of N seconds
2. Auto start with MicroBrowser will jump to the MicroBrowser view if the server is reachable after a delay of N seconds (**)
3. Auto start with HTML5 will jump to the WebView, hvis serveren er tilgængelig efter en forsinkelse på N sekunder

(**) If the server is not reachable or if the connection is lost, it will do endless retries every 10 seconds.

To abort the endless retries and return to the setup page, press 5 times in the top-left corner.
Or press the back button if available.
I stedet for at vise indlæsningsmeddelelsen "Indlæser...", kan du indstille et boot-billede til at blive vist ved opstart, indlæst fra /sdcard/Download/bootscreen.png

Single station mode
Enkeltstationstilstand bruges til direkte at starte den angivne URL i XML-appindstillingerne file, skipping the setup page.
It’s a mode where the end user will not see the setup page.

Fileautomb.xml
<settings>
<name>My Visu</name>
<start_url>http://localhost/Visu.htmlurl>
<start_mode>MicroBrowser</start_mode>
<auto_start_delay_sec>3</auto_start_delay_sec>
<use_android_keypad>false</use_android_keypad>

–> Procedure med læsning file fra ekstern lagring

1. Eksportere files from Automation Browser into external strorage (USB, SD card, …)
2. Copy automb.xml into:
   /Download/AutomationBrowser/automb.xml (til Android < 10)

/Android/data/net.spidercontrol.automb/files/automb.xml (for Android >= 10)
(The folder should already exist on the external storage)
3) Import files i Automation Browser (menu)
Når XML file er blevet læsset medurl>, starter den automatisk med den angivne URL og indstillinger.
Pressing back button will close the app.
In this mode, you don’t see the standard station list, menu, config, etc…
For at gendanne standardtilstanden skal du fjerne XML'en file fra ekstern lagring (eller fjern den eksterne lagring)

–> Procedure med læsning file fra intern lagring
1) Eksport files from Automation Browser into internal storage
2) Copy automb.xml into:
/Download/AutomationBrowser/automb.xml (til Android < 10)
/Android/data/net.spidercontrol.automb/files/automb.xml (for Android >= 10)
(The folder should already exist on the internal storage)
3) Import files i Automation Browser (menu)

For at gendanne standardtilstanden skal du fjerne XML'en file (automb.xml) fra intern lagring
Alle indstillinger, der kan defineres i XML file:
<settings>
<name>My Visu</name>
<start_url>http://192.168.1.123/Visu.htmlurl>
<start_mode>MicroBrowser</start_mode>
<auto_start_delay_sec>3</auto_start_delay_sec>
<show_navig_bar>false</show_navig_bar>
<full_screen>true</full_screen>
<immersive>false</immersive>
<auto_scale>true</auto_scale>
<pan_zoom>true</pan_zoom>
<use_android_keypad>false</use_android_keypad>
<use_external_storage>false</use_external_storage>
<pin_code></pin_code>

<start_mode> is either an integer or a string

0: Auto (not supported for auto start)
1: HTML5
2: MicroBrowser

Frameset i HTML file
Only few configurations are supported to see either 2, 3, 4 or 6 frames
An URL kan defineres for hver frame, enten en http URL til HTML5 WebView eller en RTSP URL til videostreaming, noget i retning af:

File: frameset2.html
<FRAMESET cols=”50%,50%”>
<FRAME src=”http://192.168.1.20/html/frame1.html”>
<FRAME src=”http://192.168.1.20/html/frame2.html”>

File: frameset4.html
<FRAMESET rows=”50%,50%” cols=”50%,50%”>
<FRAME src=”http://192.168.1.20/html/frame1.html”>
<FRAME src=”http://192.168.1.20/html/frame2.html”>
<FRAME src=”rtsp://192.168.1.10/live0″>
<FRAME src=”rtsp://192.168.1.11/live1″>

File: frameset3.html
<FRAMESET cols=”50%,50%”>
<FRAME src=”http://192.168.1.20/Visu.html”>
<FRAMESET rows=”50%,50%”>
<FRAME src=”rtsp://192.168.1.5:8554/live1″>
<FRAME src=”rtsp://192.168.1.6:8554/live1″>

File: frameset6.html
<FRAMESET rows=”50%,50%” cols=”33%,33%,33%”>
<FRAME src=”rtsp://192.168.1.101/live1″>
<FRAME src=”rtsp://192.168.1.102/live1″>
<FRAME src=”rtsp://192.168.1.103/live1″>
<FRAME src=”rtsp://192.168.1.104/live1″>
<FRAME src=”rtsp://192.168.1.105/live1″>
<FRAME src=”rtsp://192.168.1.106/live1″>

Bemærk: billedstørrelse i px eller procent understøttes ikke endnu

Startskærm
After having installed the Automation Browser Home Screen edition, press the Android Home button. So, you will be asked to choose for the default launcher (*). Press the Home button again to see the ALWAYS option.

Once you have chosen the Automation Browser (ALWAYS), it will automatically be launched on the next start and you will no longer see the default Android Home screen (Desktop)!
For at finde denne mulighed igen, skal du rydde indstillingen "Åbn standardindstillinger" i Automation Browser-appen. Åbn Android-indstillinger (appmenuen i øverste højre hjørne), og afhængigt af Android-versionen skal du gå til enten

• Apps > Automation Browser > Open by default > CLEAR DEFAULTS
• Storage & USB > Apps > Automation Browser > (i) icon > Open by default > CLEAR DEFAULTS

Then, press on the Android Home button again.
(*) If you don’t see the popup to select the default launcher, it is probably because another launcher is already selected as default.
In that case you will have to clear the “Open defaults” settings in the current launcher app. The name of the app is often something like “Launcher” or “Google Now Launcher”, …

CODESYS MicroBrowser FAQ

Følgende spørgsmål bliver ofte stillet vedrørende MicroBrowser CODESYS.

Jeg kan ikke oprette forbindelse! Der står “File Not Found!”
This most often has 2 possible causes:
1. Older versions of the MicroBrowser CODESYS (prior to 1.5.15.116) don’t support the option “compressed webvisu”.
2. Some CODESYS PLC’s are case sensitive. Older versions of MicroBrowser CODESYS get the entry page with the name “PLC_VISU.xml” written in big letters. But the file på webServeren er skrevet “plc_visu.xml”. Mulig løsning: Rediger “webvisu.htm” File on your PLC and change this line:
<param name=”STARTVISU” value=”PLC_VISU”>
to <param name=”STARTVISU” value=”plc_visu”>

Why are arrays not displayed correctly?
Normally arrays are not working with the applet from CODESYS itself. But with our MicroBrowser CODESYS it is possible, BUT the indexed variants of the needed array elements must also exist in the view, because otherwise the variable address is unknown.

Exampdet:
“.g_afb_GF[.g_index].i_bo_configured” is an indexed variant which can be read and written with MicroBrowser CODESYS, but you must already know during build-time of your project, which indexes are used, and you also have to include the resolved variants of the variable in the view: “.g_afb_GF[6].i_bo_Configured” (for eksempel i et skjult tekstfelt).

Læs mere om denne manual og download PDF: