SIMBA Pool Table 7FT Instruktioner

Based on the provided manual for the SIMBA poolbord 7FT, the instructions only cover the assembly of the base legs and the main billiard table structure. The manual does not contain specific steps for an air hockey or table tennis conversion top, nor does it describe a rotating mechanism.

Typically, for multi-game tables of this style:

• Table Tennis Tops: These are usually separate panels that rest on top of the billiard rails and are not designed to stay attached while the table is being rotated. They must be removed before flipping the table.
• Integrated Rotating Tables: If your table is a 3-in-1 rotating model, the air hockey surface is usually the reverse side of the billiard bed. In such cases, the surface is permanently fixed to the rotating cabinet at the factory.

If you have a separate air hockey plate that was intended to be mounted, please check for any locking pins or latches on the side of the table frame. However, as the attached manual only shows a standard fixed-base pool table, there may be a discrepancy between this manual and your specific multi-game model. We recommend checking if there are additional locking brackets included in your hardware kit that were not listed in the basic assembly guide.