Indhold
skjule
PIZZELLO Rectangular Dining Table
Specifikationer
- Designed for durability, weather resistance, and low maintenance
- Egnet for both indoor and outdoor spaces
- Temperaturområde: -104 to -140 (-40 to 60)
- Samlingstid: Op til 30 minutter
Produktbrugsvejledning
Reservedelsliste:
List of parts A-N with quantities and sizes.
Nødvendige værktøjer:
- Unbrakonøgle (medfølger)
- Open-end wrench (Provided)
Monteringsvejledning
- Trin 1: Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
- Trin 2: Assemble parts C, Cupright, F, and L screws as instructed.
- Trin 3: Continue assembling part F with part B using L screws.
- Trin 4: Attach the connected B and C parts to the tabletop using screw J.
- Trin 5: Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.
Patio Bistro Chair
- Follow the labeled legs for the front side indication
- Assemble on a flat surface to avoid scratches
- Do not dispose of the original box until you confirm the product
- Contact after-sales service for product return
INDLEDNING
- Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
- To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.
Forholdsregler ved brug
OPMÆRKSOMHED
- Varmemodstand: The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
- Undgå langvarig soleksponering: While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
- Forhindre Ridser: Avoid using sharp objects such as knives directly on the table surface to prevent scratches.
PÅKRÆVET VÆRKTØJ
SAMLINGSKRAV
STYKLISTE
MONTERINGSVEJLEDNING
- Trin 1
- Use screw G and nut N to connect panel E and panel D.
- Note: If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
- Please check it before installing.
A) If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
B) If part E is incorrectly connected, you will see the 4 silver screw heads on the side of the table, and you will have a problem on the next step.
- Trin 2
- Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
- Insert one end of part F into part C, align the holes, and secure it with two L screws.
- Trin 3
- Insert the other end of part F into part B, align the holes, and secure it with two L screws
- Insert the other end of part F into part B, align the holes, and secure it with two L screws
- Trin 4
- Attach the connected B and C parts to the tabletop using screw J.
- Attach the connected B and C parts to the tabletop using screw J.
- Trin 5
- Use screws J and H to connect part 2 (A) parts with parts B and C.
- (Secure with screw H from the inside)
- Secure with screw H from the inside
PATIO BISTRO CHAIR
Kære kunde,
- Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use.
- If the product is passed on to third parties, this manual has to be passed on along with the product. For any questions, don’t hesitate to contact us.
PÅKRÆVET VÆRKTØJ
SAMLINGSKRAV
DELLISTE
- Fasten screws loosely during initial assembly. Do not firmly tighten screws until step 7.
Monteringsvejledning
- Tips: We have labeled the legs to indicate which side is the front side.
- However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.
OPMÆRKSOMHED
- When installing, we suggest you can assemble the product on the flat carton which comes with the product, or any other clean floor to avoid the product surface being scratched.
- Please do not dispose of the original product box until you confirm you received the complete and correct item.
- If you want to return the product, you are suggested to contact our after-sales service first. You need to pack the returned product with the original box and then follow the steps to return it.
- Trin 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
- Please don’t tighten the screws yet.
- Trin 2: Connect the beam (E) andthe Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
- Please don’t tighten the screws yet.
- Trin 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
- Please make sure you attach the seat from the correct direction.
- Trin 4: Use the 4 scresw (G) and 4 nuts (F) to connect them.
- Trin 5: Remove the 2 protective cases on the seat (C).
- Trin 6: Assert the seat back (D) to the seat (C).
- Trin 7: Spænd alle skruer og møtrikker.
How To Replace The Back And Seat
- A: Slowly take apart the back of the back frame.
- B) Slowly take apart the seat from the seat frame.
- Note: When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.
FAQ
Can I use the dining table outdoors?
Yes, the table is designed for both indoor and outdoor use. It is weather-resistant.
What is the weight capacity of the patio bistro chair?
Stolen har en vægtkapacitet på 265 lbs.
Dokumenter/ressourcer
 |
PIZZELLO Rectangular Dining Table [pdf] Brugsanvisning Rectangular Dining Table, Rectangular Table, Dining Table |