LTECH M1C Wireless Controller Instruction Manual

LED controller
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Tekniske parametre

Dimensioner

Produkt installation

To måder at fastgøre fjernbetjeningen på:

1. Fastgør fjernbetjeningsholderen i væggen med to skruer.
2. Fastgør fjernbetjeningsholderen i væggen med en 3M-klæber.

Udskiftningsbatteri

Knap funktioner

Dimming Remote Control M1C/M1D

Zone 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Knap funktioner
RGB/RGBW Remote Control M4C/M4D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Tryk på farveringen: Tryk på RGB-farveringen for at vælge en farve.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Tryk på farveringen: Tryk på farvetemperatur-/RGB-farveringen for at vælge en farve.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

Ledningsdiagram

Used with P-series controllers

Kodeparring
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Note: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Ryd kode
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Ryd kode
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Status for indikatorlys

• Når lyset er tændt, skal du trykke på en vilkårlig knap, hvorefter fjernbetjeningens indikatorlampe lyser rødt.
• Hvis der ikke trykkes på nogen knap i 6 sekunder, går fjernbetjeningen i dvaletilstand. Tryk på en vilkårlig knap for at afslutte dvaletilstanden.

Note: Hvis LED-lampen ikke tændes, når der trykkes på knappen, kan batteriet være dødt. Udskift venligst batteriet i tide.

Transport og opbevaring

1. Transport
   Produkter kan sendes via køretøjer, både og fly.
   Under transport skal produkterne beskyttes mod regn og sol. Undgå venligst alvorlige stød og vibrationer under på- og aflæsningsprocessen.
2. Opbevaring
   Opbevaringsbetingelserne skal være i overensstemmelse med klasse I miljøstandarder. De produkter, der har været opbevaret i mere end seks måneder, anbefales at blive efterset og kan kun bruges, efter at de er blevet kvalificeret.

Opmærksomhed

• Brug venligst i et tørt indendørs miljø;
• Når du installerer batteriet, skal du forbinde den positive og negative pol korrekt. Hvis fjernbetjeningen ikke skal bruges i en længere periode, skal du tage batteriet ud;
• Når fjernbetjeningsafstanden forkortes, og eller fjernbetjeningen ikke fungerer ofte, bedes du udskifte batteriet i tide;
• Tag det forsigtigt og læg det fra dig for at forhindre fald, der forårsager skade;
• Hvis der opstår en fejl, skal du ikke forsøge at reparere produkterne selv. Hvis du har spørgsmål, bedes du kontakte dine leverandører.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Garantiaftale

• Garantiperioder fra leveringsdatoen: 5 år.
• Gratis reparation eller udskiftning af kvalitetsproblemer leveres inden for garantiperioderne.

Garantiudelukkelser herunder:

Følgende betingelser er ikke inden for garantiområdet for gratis reparations- eller udskiftningstjenester:

• Ud over garantiperioder;
• Enhver kunstig skade forårsaget af høj voltage, overbelastning eller ukorrekt betjening;
• Produkter med alvorlig fysisk skade;
• Skader forårsaget af naturkatastrofer og force majeure;
• Garantietiketter og stregkoder er blevet beskadiget.
• Ingen kontrakt underskrevet af vores virksomhed.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

ADVARSEL

• INDTAGELSESFARE: Dette produkt indeholder en knapcelle eller et møntbatteri.
• DØD eller alvorlig personskade kan opstå ved indtagelse.
• En slugt knapcelle eller møntbatteri kan forårsage interne kemikalieforbrændinger på så lidt som 2 timer.
• OPBEVAR nye og brugte batterier UTILGÆNGELIGT FOR BØRN
• Søg øjeblikkelig lægehjælp, hvis et batteri mistænkes for at blive slugt eller sat ind i nogen del af kroppen.

a) Fjern og genbrug øjeblikkeligt eller bortskaf brugte batterier i henhold til lokale regler og hold dem væk fra børn. Smid IKKE batterier i husholdningsaffaldet eller brænd.
b) Selv brugte batterier kan forårsage alvorlig personskade eller død.
c) Ring til et lokalt giftkontrolcenter for information om behandling.
d) The compatible battery type: CR2032.
e) Det nominelle batteri voltage: 3Vdc.
f) Ikke-genopladelige batterier må ikke genoplades.
g) Tving ikke udledning, genopladning, adskillelse, opvarm ikke over (producentens specificerede temperaturklassificering) eller forbrænd. Hvis du gør det, kan det resultere i personskade på grund af udluftning, lækage eller eksplosion, hvilket resulterer i kemiske forbrændinger.
h) Sørg for, at batterierne er installeret korrekt i henhold til polariteten (+ og -).
i) Bland ikke gamle og nye batterier, forskellige mærker eller typer batterier, såsom alkaline, kul-zink eller genopladelige batterier.
j) Fjern og genbrug straks eller bortskaf batterier fra udstyr, der ikke har været brugt i længere tid i henhold til lokale regler.
k) Fastgør altid batterirummet helt. Hvis batterirummet ikke lukker forsvarligt, skal du stoppe med at bruge produktet, fjerne batterierne og holde dem væk fra børn.