LTECH KMS1 Switch Module Owner’s Manual

LTECH KMS1 Switch Module

Produktintroduktion

• Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
• Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
• Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
• Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
• Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.

Tekniske specifikationer

Produktbilleder

DIMENSION

• Enhed: mm
• Dimensioner: 45 x 45.5 x 20.5

Ledningsdiagram

1.  Mechanical Switch Wiring Diagram
   Includes connections for load, line (L), and neutral (N).
2.  Push Switch Wiring Diagram
   Includes connections for load, line (L), and neutral (N).

Brug NFC Lighting APP'en
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.

Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.

Rediger parametre
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.

Add to Matter Platform Instructions

1. This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
2. To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.

Kompatible modeller

Opsætning Eksample

• This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
• For iPhone models 15 and above, no Matter hub is required; they can be added directly.

Tilføj tilbehør

• Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
• *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.

Kontrolenhed
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.

Avancerede funktioner

Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.

Gendan fabriksindstillinger

Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.

Nulstilling ved opstart
I tilfælde af en magt outage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.

Opmærksomhed

• Produktinstallation og idriftsættelse skal udføres af en kvalificeret fagmand.
• Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
• God varmeafledning vil forlænge produkternes levetid. Sørg for god ventilation.
• Kontroller venligst, om arbejdsvolumentagDen anvendte overholder produktkravene.
• Diameteren på den anvendte ledning skal kunne belaste de lysarmaturer, du tilslutter, og sikre de faste ledninger.
• Før du tænder for produkter, skal du sørge for, at alle ledninger er korrekte i tilfælde af forkert tilslutning, der forårsager skade på lysarmaturer.
• Hvis der opstår en fejl, skal du ikke forsøge at reparere produkterne selv. Hvis du har spørgsmål, bedes du kontakte dine leverandører.

Garantiaftale

Garantiperioder fra leveringsdatoen: 2 år. Gratis reparation eller udskiftning af kvalitetsproblemer leveres inden for garantiperioderne.

Udelukkelser fra garantien

• Ud over garantiperioder.
• Enhver kunstig skade forårsaget af høj voltage, overbelastning eller ukorrekt betjening.
• Produkter med alvorlig fysisk skade.
• Skader forårsaget af naturkatastrofer og force majeure.

1. Garantietiketter og stregkoder er blevet beskadiget.
2. No contract signed by our company.