LTECH D5 DMX512 Decoder Instruction Manual

LTECH D5 DMX512 Decoder

Produktintroduktion

1. Designed for Hi-power multiple channels application, 5 channels output, and Max. 6A current per channel, up to 1440W output power.
2. The human-computer interaction interface is composed of an OLED screen and 3 buttons, which displays rich content and is simple and fast to operate.
3. The number of DMX channels can be set to CH01/CH02/CH03/CH04/CH05, which can realize independent address independent channel control, or one address to control multiple channels.
4. The PWM frequency can be set to 300/600/1200/1500/1800/2400/3600/7200/10800/14400/18000Hz;
5. Features three DMX interfaces: 3-pin XLR, green terminal, and RJ45, enhancing signal  B transmission efficiency and interference resistance. The green terminal additionally provides signal amplifikation.
6. With the operations can be completed via the RDM master console, such as parameters browsing & settings, DMX address settings, equipment recognition, etc.
7. DMX master control mode；
8. With firmware upgrade function.
9. With short circuit, over current and over temp. protection, as well as warning function when a fault occurs.
10. With power-on state management and fast self-testing function.
11. 16bit (65536 levels) / 8bit (256 levels) grey level available.
12. Available for standard, linear, LOG or custom 0.1-9.9 dimming curve.
13. The device has 10 built-in personalized lighting effects. You can enter the setting interface of  the DMX master mode and select different lighting effects to achieve precise output control of other decoders.
14. Parameters can be set and modified through the RDM master control or mobile phone APP,  eliminating the need for high-altitude operations.

Tekniske specifikationer

• Model: D5 Input Signal: DMX512/RDM Input
• Voltage: 12- 48Vdc Current Load: 6A × 5CH Max. 30A
• Output Power: (0~72W..288W) × 5CH Max. 1440W DMX
• Interface: 3-pin XLR, RJ45, green terminal
• Control Mode: DIM/CT/RGB/RGBW/RGBCW
• Dimming Curve: 0.1~9.9, standard, linear, LOG Grey
• Level: 8bit (256 levels) / 16bit (65536 levels)
• Protection: Short circuit / Over current / Over-heat protection, recover automatically Working
• Temperatur: -30°C~55°C
• Mål: L169xB80xH39mm
• Package Size: L182xW91xH41mm
• Vægt (GW): 550g

Hovedkomponentbeskrivelse

OLED-skærmgrænseflade

* Fast self-testing function: press “A” or” V”keys simultaneously for 2-3 seconds under any page, decoder will enter self-testing function

Ledningsdiagram

1. Connecting LED lights:
2. DMX console connection:
   D5 is equipped with 3 types DMX terminals for users’ selection. The following diagram takes 3-pin XLR as an example, same connecting method for the rest two: RJ45 & green terminal (with amplifier funktion).
3. DMX -kontroltilstandIf the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of each line
4. The connection diagram of 3 kinds of DMX/RDM terminals:
5. Tilslutningsdiagrammet af AMP signal amplifier terminal:
   Connecting with green terminal or an extra amplifier will be needed when more than 32 decoders are connected or use overlong signal wire(as shown below). Signal amplifier should not be more than 5 times continuously.

Address setting table

Work with RDM Editor 
D5 can work with LTECH RDM editor (Model: WiFi-RDM01) to realize changing the parameters by long-range setting, wiring diagram as below:

RDM editor App interface instruction
Download the App, setting the D5 parameters (frequency, bit, curve, modes, dimming range, screensaver, etc.) after well connecting the RDM editor, more details, please check the manual of WiFi-RDM01.
Well installation of products first, then working with WiFi -RDM01 to realize setting parameters and firmware upgrade by App.

• Click”Add”, edit the address in corresponding box.
• Click”ID”, get more product details.
• Klik, enter edited interface.
• Click”No.”, issue the recognizing command.

Opmærksomhed

• Product installation and commissioning should be done by a qualified professional. Our company products are and not lightning proof non-waterproof(special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted  in a waterproof enclosure or in an area equipped with lightning protection devices. Good heat dissipation will prolong the working life of products. Please ensure good  ventilation.
• Kontroller venligst, om arbejdsvolumentage used complies with the parameter requirements of  products.
• The diameter of wire used must be able to load the light fixtures you connect and ensure  the firm wiring.
• Before you power on products, please make sure all the wiring is correct in case of  incorrect connection that causes damage to light fixtures.
• If a fault occurs, please do not attempt to fix products by yourself. If you have any  question, please contact your suppliers.

Garantiaftale 

Garantiperioder fra leveringsdatoen: 5 år.
Free repair or replacement services for quality problems are provided within warranty  periods.

Garantiudelukkelser herunder:

• Følgende betingelser er ikke inden for garantiområdet for gratis reparations- eller udskiftningstjenester:
• Ud over garantiperioder.
• Enhver kunstig skade forårsaget af høj voltage, overbelastning eller ukorrekt betjening. Produkter med alvorlig fysisk skade.
• Skader forårsaget af naturkatastrofer og force majeure.
• Garantietiketter og stregkoder er blevet beskadiget.
• Ingen kontrakt underskrevet af vores virksomhed.

1. Reparation eller udskiftning er den eneste retsmiddel for kunder. Vores virksomhed er ikke ansvarlig for hændelige skader eller følgeskader, medmindre det er inden for rammerne af loven.
2. Vores virksomhed har ret til at ændre eller justere vilkårene i denne garanti, og skriftlig frigivelse er gældende.

Denne vejledning kan ændres uden yderligere varsel. Produktfunktioner afhænger af varerne. Du er velkommen til at kontakte vores officielle forhandlere, hvis du har spørgsmål.