LeadJoy BLADE PLUS Wireless Gaming Controller User Manual

LeadJoy BLADE PLUS Wireless Gaming Controller

Specifikationer

• Model: LeadJoy-Blade Plus
• Mål: 120*70mm
• Weight: 80G++/44P
• Indgang: 5V3A
• Battery: Rechargeable (specific capacity not provided, but has a low power warning)
• Connectivity: Bluetooth, Type-C (wired)
• Supported Modes: Xinput, Switch, DS4, G-touch
• Device Names: Xbox Wireless Controller, Pro Controller, Wireless Controller / DualShock 4 Wireless Controller, Blade Plus
• Indicator Light Colors: Green (Xinput), Red (Switch), Blue (DS4), Cyan (G-touch)

NAVN PÅ HVER DEL

Brugsvejledning

Tænd / sluk
Press and hold the Home button for 2 seconds to turn the controller on/off. When powered on, the controller will automatically reconnect to the last paired device. If reconnection is not successful within 30 seconds, the controller will shut down to save power. (For the first-time use, the controller defaults to Switch mode)

Forbindelse
There are two connection methods for the controller: Bluetooth/Wired. The connection methods are described as follows:

Bluetooth-forbindelse

1.  With the controller turned on, before connecting, you need to switch to the corresponding mode to use it. The Home light will change color to indicate the selected mode. Press and hold the pairing button at the bottom-right of the controller for
   • 2 seconds—the Home light will flash rapidly to enter pairing mode.
   • Mode Switching Key Combinations:
   • Tryk og hold + A for 2 seconds (Xbox Wireless Controller)
   • Tryk og hold+ B for 2 seconds (Nintendo Switch)
   • Tryk og hold + X for 2 seconds (DS4)
   • Tryk og hold + Y for 2 seconds (G-touch)
2. In pairing mode (Home light flashing rapidly), search for the controller signal in “Settings > Bluetooth” on your device. The device name of the controller is as follows. Tap to pair until the Home light remains on constantly
3. If the connection is not successful within 60 seconds, the controller will shut down to save power.
4. If not any Input after being connected within 15 minutes, the controller will shut down to save power.

To connect with Switch
Open the “Home > Controllers > Change Grip/Order” on your Switch, then switch the controller in the Switch mode and pairing mode, and simultaneously press “R1+L1” on the controller. Wait for the Switch to recognize the controller and press the “A” button to complete the pairing.

Kablet tilslutning

• Power on the controller and connect it to your device via a Type-C cable. Mode switching follows the same method as Bluetooth connection.
• For optimal performance on Steam, we recommend disabling Steam Input to ensure native controller functionality.

Fabriksindstilling
While the controller is powered off, press and hold the FN + Home buttons for 10 seconds until the controller vibrates.

Batteriindikator

• Low Battery Alert: The Home light will flash red when the battery is critically low. Charge the controller promptly to avoid interruption during use.
• Charging Status: The Home light is in a breathing red state during charging and turns off when fully charged.

Joystick / Trigger Calibration

• Enter calibration mode by pressing and holding the buttons for 3 seconds (the FN light is in an orange state).
• Calibrate Joysticks: Rotate both joysticks 3 full circles in all directions at maximum range.
• Calibrate Triggers: Fully press the left and right triggers 3 times each.
• Exit calibration mode by pressing simultaneously. The FN light will blink twice during successful calibration.

Official Support Center

Scan the QR code below or visit the provided URL to access our Support Center, where you can find:

• Leadjoy App & Firmware Tools, Video Tutorials, Multilingual Digital Manuals (Full Version), FAQs, Player Community, and stuff.

Fejlfinding

• Controlleren tænder ikke: Ensure the battery is charged. Press and hold the Home button for 2 seconds.
• Controlleren forbinder ikke:
  • Ensure the controller is in the correct pairing mode for your device (Xinput, Switch, DS4, G-touch).
  • Check your device’s Bluetooth settings.
  • If using a wired connection, ensure the Type-C cable is securely connected.
  • If no connection is made within 30 seconds, the controller will power off; try again.
• Controller disconnecting frequently: Ensure the controller is within range of your device. Check for interference from other wireless devices.
• Charging indicator issues: The charge indicator is based on current voltage and may be inaccurate. Power spikes can cause normal fluctuations, which are not a quality defect.
• Steam input issues: Disable “Steam Input” in Steam settings for native controller input.

FCC Advarsel

S 15.19 Labelling requirements. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. Denne enhed må ikke forårsage skadelig interferens, og
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. -Increase the separation between the equipment and the receiver. -Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

RF-advarsel for bærbar enhed:
The device has been evaluated to meet general RF exposure. The device can be in portable condition without restriction- According to S 15.247(e)(i) and l. l). systems 0Frating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines.

IC Forsigtig.
This device contains licence-exempt devices that comply with Innovation. and FÆonomic Development Canada conditions:

1. Denne enhed må ikke forårsage interferens.
2. Denne enhed skal acceptere enhver interferens. herunder interferens, der kan forårsage uønsket drift af enheden.