iCSeecam EseeCloud Camera App Instruction Manual

Pre use settings

1. For products with batteries, please turn the power switch to “ON” mode, For products without batteries, please connect the camera to the power adapter provided with the product, or connect the camera to a power source.
2. Please place the wifi camera with in 2 meters of the router when connecting to the Internet.
3. Connecting the phone to the WiFi and make sure know the exact WiFi password.

Tilføj enhed

1. .WIFI kamera:
   Trin 1:Please connect the device to the power supply to ensure that the device is powered on normally;
   Trin 2: Log in to the “Esee cloud” APP, turn on the Bluetooth function of the mobile phone, and click the “+” add button on the interface to enter the automatic search device interface:
   Trin 3: Select the device you need to add, click the “Add” button on the right, and follow the interface guidance to add the device:
   Note: If you do not find the device you want to add after waiting 10son the Bluetooth search interface, please click “Scan to add” below to scan the QR code on the device body to add the device.
   
2. 4G kamera:
   Trin 1: Tilslut venligst enheden til strømforsyningen for at sikre, at enheden er tændt normalt;
   Trin 2: On the automatic search interface, click ‘Scan to add” to enter the scan code interface;
   Trin 3: Scan QR-koden på enhedens krop, og tilføj enheden i henhold til grænsefladevejledningen.
   Note: The 4G camera can only connect after inserting a SIM card. Please insert a data-enabled SIM card first, then turn on the camera or connect it to a power source to complete the connection.
   

Note:

1. Hvis du ikke kan finde QR-koden på enhedens krop, skal du vælge andre tilføjelsesmetoder i henhold til enhedstypen:
   1. Insert the SIM card or connect the network cable to use the device, please click “Manual Add’, enter the device ID to add the device;
   2. For the device used to connect to the router WiFi. please click” Camera scan code to add” or “Camera hots pot add” to add the device according to the interface guidance;
2. Hvis det sted, hvor du installerer kameraet, ikke kan forbindes til internettet, skal du klikke på knappen "WiFi Connection" i øverste højre hjørne af WiFi-valggrænsefladen og skifte til "Direkte forbindelse" i pop op-vinduet.

Information til brugerne

Note: Dette udstyr er blevet testet og fundet i overensstemmelse med grænserne for en klasse B digital enhed i henhold til del 15 af FCC-reglerne. Disse grænser er designet til at give rimelig beskyttelse mod skadelig interferens i en boliginstallation.
This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures.

• Reorienting or repositioning the receiving antenna.
• Increasinafstanden mellem udstyret og modtageren.
• Tilslutning af udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

Vigtig: Changes or modifications not expressly approved by the manufacturer responsible for compliance may cause the user to lose operation. or modifications not expressly approved by the manufacturer responsible for compliance could cause the user to lose the right to operate the equipment.