Haozee Tuya Zigbee Plug User Guide

STRØMSTIK
BRUGERVEJLEDNING
ZIGBEE

Specifikationer

Input bindtage: AC 85-250V 50/60Hz
Maksimal strøm: 16A
Overbelastningsbeskyttelse: 16A
Standby strømforbrug: 0.5W
Trådløs afstand: 50M
Kommunikationsprotokol: Zigbee 3.0
Network Protocol: IEEE 802.15.4 MAC/PHY
Operating Temperature: 0°C~50°C (32~122°F)
Operating Moisture: 0%~85%RH (Non-con-densing)
Product Size: 59mm X 59mm X 56mm

LED-tilstand

Produktkonfiguration

Installation

1. Plug the smart socket into a power outlet.
2. Add the smart socket to the app.
3. Turn on the switch. (The socket can connect to small appliances such as lights, fans, etc.)

Kom i gang

1. Download APP
Android: Download the “Smart Life” app from Google Play.
IOS: Download the “Smart Life” app from the App Store.

http://smartapp.tuya.com/smartlife
2. Registrer og log ind
Run APP, register and log in the account (new users need to register, and existing accounts can enter email and password to log in)

3. Tilføj enhed
(1) Add Tuya ZigBee Gateway
Add Tuya ZigBee controller first and operate with the controller user manual. (Please notice the wired and wireless version controller)(2) Add Sub-devices
Before adding a device, ensure it is in pairing mode. To enter pairing mode, press and hold the reset button for 6 seconds until the device indicator light flashes.

Hovedfunktioner

Working status and record settings
1. APP hovedgrænseflade

2. Enhedsfunktioner
(1) Timer funktion

1. Nedtælling til/fra
   
2. Timed On/Off
3. Looping timing
4. Tilfældig timing
5. Jog kontakt

(2) Electricity metering

3. Opsæt

1. Switch Log
2. Clear battery data
3. Tændt tilstand
4. Indicator light mode
5. Børnelås
   Can be deactivated locally by powering on the device or by pressing the button 4 times consecutively)

Andre funktioner

1. Delte enheder
   
2. Produktkobling
   E.g., linkage with human infrared sensor; when the PIR detects movement, the socket switch is turned on.
3. Gendan standard
   After clicking “Uninstall and Clear Data, adding the device again will clear the data and restore the default settings.

FAQ

1. Why does the socket automatically turn off the power after an appliance is plugged in?
A: This is because the plugged-in appliance exceeds the rated current (16A) of the socket, triggering the overload protection function.
The socket will automatically cut off the power to prevent damage.
2. What happens when a socket experiences undervoltage eller overvoltage?
A: When undervoltage (bindtage below 85V) or overvoltage (bindtage above 260V) is detected, the socket will immediately and automatically cut off the power.

Smart Home Device indeholder WiFi-smart-enhed, Z-Wave-enhed og ZigBee-enhed, giver dig flere valgmuligheder til at skabe et nyt smart liv.
Wide application on the living room, kitchen, bedroom, bathroom, garage, garden, yard or basement of your home, office, ware house, chain store…
Gør livet smartere og mere bekvemt.