FlySpark F4 V1 Stack Flight Controller
Specifikationer
- Produktnavn:
FlySpark F4 V1 BLS 60A Stack - AI funktioner:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Software Support:
Betaflight, INAV, Ardupilot, EMU-flyvning, SkyBrush - ESC Communication:
BLHeli_S Bluetooth & USB-C - Forbindelse:
3-6S LiPo - Dimension:
47.8 mm (L) x 47.5 mm (B) x 18.3 mm (H) - Montering:
30.5 x 30.5 mm med 4 mm hulstørrelse - Vægt:
34 g
Produktbrugsvejledning
FlySpark F4 V1 Flight Controller
Layout:
Refer to the user manual for the layout of the flight controller.
Perifer forbindelse:
Connect peripherals as per the provided diagram.
App & FC-konfiguration:
Use the recommended apps and follow the configuration instructions.
FC Firmwareopdatering:
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-I-1 ESC
Layout:
Check the layout guide in the manual for proper installation.
Tilslutning med motorer og strømkabel:
Connect motors and power cables securely.
ESC-konfiguration:
Use the FlySpark app for ESC configuration settings.
ESC-firmwareopdatering:
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A Stack
Specifikationer forbiview
Pakke
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF lav ESR-kondensator x 1
- M3 nylonmøtrik x 4
- SH 1.0 mm 25 mm-længde 8-pin-kabel (til FC-ESC-forbindelse) x 1 SH 1.0 mm 75 mm-længde 6-pin-kabel* x 1
- M3*30mm indvendig sekskantskruer x 4
- DJI 6-pin kabel (80 mm) x 1
- XT60 strømkabel (100 mm) x 1
FC Tilslutningsdiagram
Guide til FC- og ESC-forbindelser
Metode 1:
- Using 8.Pin JST Cable
Metode 2:
Direkte lodning
- Lod 8 ledninger til de 8 puder i hver ende, følg pudedefinitionerne nedenfor
Flight controller specifikationer
- Brug 6-benet kabel, der følger med O3 Air Unit
- Brug 6-benet kabel, der følger med FlySpark F4 V1 BLS 60A Stack
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Note:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Tilslutning med motorer og strømkabel
ESC Specs FlySpark F4 V1 BLS 60A Stack
ESC-firmwareopdatering
Denne 8-bit 50A ESC leveres forudindlæst med BLHeliS-firmware, men kan også flashes til Bluejay-firmware, der tilbyder RPM-filtrering og Bi-directional Dshot-understøttelse. Følg disse trin for at opdatere firmwaren:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Tilslut til pc:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
FORSIGTIG:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
Ofte stillede spørgsmål
Hvordan opdaterer jeg ESC-firmwaren?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Dokumenter/ressourcer
 |
FlySpark F4 V1 Stack Flight Controller [pdfBrugermanual F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |