Fender Quantum HD Software User Manual

Fender Quantum HD Software

Specifikationer

• Product Name: Quantum HD Series
• Interface Type: Audio Interface
• Manufacturer: Fender
• Kompatibilitet: Windows, macOS
• Tilslutning: USB-C

Overview

• This Software User Manual details how to use Universal Control to control Quantum HD audio interface. Before jumping in, make sure you’ve registered your device and installed Universal Control, as it provides updates and upgrades for your Quantum interface.
• For more information about the Quantum HD, including hardware features, hookup diagrams, and getting started with the interface, please review din Quantum-brugervejledning.

Produktregistrering og installationsproces
Din Quantum HD er en kraftfuld lydgrænseflade, fyldt med professionelle lydværktøjer og fleksible overvågningskontroller. Før du opretter forbindelse til en computer, skal du besøge www.fender.com and navigate to the Quantum HD product page to verify the latest system requirements for your interface. Once you’ve verified that you meet the latest system requirements, follow these steps:

1. Visit My.Fender.com and create or log into your user account.
   • Note: If you have previously created a MyPreSonus account, you can use these credentials on MyFender.com to log in. All of your previous registered PreSonus products will be available from the new unified MyFender account experience.
2. At the top of your MyFender homepage, click onto the “Register Products” button. After clicking, a dialog window will appear.
3. From the dialog window, specify the date you purchased the interface and the serial number on your interface. After you’re done,click “Register.”
4. After clicking Register, another dialog window will appear where you can initiate your Fender Studio Pro downloads.
5. To download Universal Control, navigate to the Quantum HD product page from your MyFender homepage.

Note:
The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will greatly affect the overall performance of your recording system. A faster processor and more RAM can reduce signal latency (delay) and improve overall performance.When connecting to Universal Control, you have two options:

• Connect and sync your Quantum HD interface to your desktop via USB-C connection. This option allows you to use Universal Control while recording and playing back audio through Fender Studio® Pro or a third-party DAW of your choice.
• Connect your desktop, Apple iOS / Android device, or iPad to the same wireless network. This option will allow you to use any or all of these devices to remote control your Quantum interface anywhere in the studio or venue.

The following sections detail the Universal Control installation process for Windows, Mac, iPad, and Apple iOS / iPadOS /
Android-enheder.

Note:
Make sure your Quantum interface firmware version is up to date from your computer before connecting to the device any other way.

Universal Control Installation til Windows

• Tilslut dit Quantum-interface til en ledig USB-C-port, og start installationsprogrammet. Universal Control-installationsprogrammet fører dig gennem hvert trin i installationsprocessen.
• This application will install the ASIO drivers. Please read each message carefully. It is recommended that you quit all applications before you start the installation.

Universal Control Installation til macOS

• Tilslut dit Quantum-interface til en ledig USB-C-port, og start installationsprogrammet. Universal Control-installationsprogrammet fører dig gennem hvert trin i installationsprocessen.
• Enheder i Quantum-serien kræver en brugerdefineret driver. Denne driver er inkluderet i Universal Control-appen.
• Efter installation og lancering af Universal Control kan macOS-sikkerhed bede dig om at "Godkend lyddriverens systemudvidelse".
• For macOS 15/26 Users: Open System Settings → General → Login Items & Extensions → click the “i” icon next to Universal Control.
• Operativsystemet giver dig valget mellem "OK" eller "Åbn systemindstillinger". Vælg "Åbn systemindstillinger", eller hvis du allerede har klikket på "OK", skal du åbne Systemindstillinger > Privatliv og sikkerhed.
• Bemærkning til macOS-brugere: Når installationen er færdig, vil du finde Universal Control-applikationen i mappen Programmer. Det anbefales, at du placerer dette i din Dock for nem adgang.

For macOS 12/13-brugere:

• Vælg "App Store og identificerede udviklere", hvis det ikke allerede er indstillet. Vælg "Tillad", så Universal Control kan tilføje Quantum-driveren. Indtast din systemadgangskode som anmodet.

For macOS 14-brugere:

• Vælg "App Store og identificerede udviklere", hvis det ikke allerede er indstillet. Klik på "Detaljer".
• Vælg din godkendelsesmetode.
• Aktiver de universelle kontrolindstillinger, og klik på OK.
• Du er nu klar til at bruge din nye Quantum!

Universal Control Installation for Apple iOS / iPadOS / Android
To remote control your Quantum interface with Apple iOS / iPadOS / Android devices, you must first locate and install the Universal Control application onto your Apple iOS / iPadOS / Android device from your app store. Once downloaded, you can use Universal Control with an Apple iOS / iPadOS / Android device by connecting to the same wireless network as the computer that is connected via USB to your Quantum interface.

Bemærk venligst:
Quantum interface firmware can only be updated from your computer. Firmware updates from Universal Control are not available from Apple iOS / iPadOS / Android mobile devices.

iPadOS Low Latency Driver

• When using the latest iPad Air M3 and iPad Pro M5, round trip lag (latency) can be reduced by up to 40% (2-3ms less latency) by enabling the Quantum USB Audio Driver from your iPad settings. Once Universal Control is installed on your iPad, navigate to iPadOS’s Settings > Apps > Universal Control and turn on the Quantum USB Audio Driver.
• Note: This driver only applies to Apple iPadOS 18+. Not applicable to any earlier iPadOS versions nor any version of Android.

Mobile Compatibility Modes

• Due to limitations to some operating systems, the Quantum HD includes various mobile modes, which allows it to be used on Android devices with Android version 14 or later.

When using Quantum HD with a device that has Android 14+, ensure that the correct mobile mode is selected. To change modes from your Quantum HD, press and hold  the knob until the “Settings” screen appears. Navigate to “Mobile Mode” (shown as “Device Mode” in Universal Control), then press the knob to select a mode.

• Off: Use this mode for macOS, Windows, and iOS / iPadOS devices (no channel or sample rate limitations).
• Android: Use this mode for Android OS 14+ devices. This option is best for most applications and supports 2 (QHD 2) or 8 (QHD 8) input channels.
• Android+: This mode is also used for Android OS 14+ devices (for use with specific applications that can access full channel counts).

Note:
Maksimum sample rate possible for both Android and Android+ modes is 48 kHz.

Universal kontrol

• Universal Control is both a driver-management utility and software control interface for your Quantum Interface

Universal kontrol giver følgende:

• Hardware Control. All of Quantum’s front panel hardware controls can be adjusted using Universal Control, facilitating easy hardware manipulation even if Quantum is installed in a location out of reach of the computer operator.
• Overvågning med lav latens. Brug af Universal Control eliminerer den latens, der er forbundet med DAW I/O-buffering, hvilket gør overvågning problematisk for udøveren. Ved at fjerne DAW's softwareindgangsovervågningsfunktion fra overvågningssignalstrømmen helt, er behovet for at justere I/O-bufferstørrelser og latens ikke længere et problem.
• Send / Cue Busser. Universal Control har stereo aux-busser, med uafhængige sendeniveauer pr. indgang.
• Konfigurationsstyring (Scener). Universal Control-konfigurationer kan gemmes og indlæses til/fra disk som Scener, for bekvem og ubegrænset sessionsstyring.

Universal Control has two main components: the Start and the Mixer pages. We’ll go into more detail about each in the sections below.

Universal Control Start Page
Universal Control contains driver support, software control, monitor mixing, and firmware management for Fender and PreSonus hardware. After opening Universal Control, you will see the Launch window. From this window, you can manage all the driver settings.

• Sample Sats. Ændrer sample sats. Du kan indstille sample rate til 44.1, 48, 88.2, 96, 176.4 eller 192 kHz. En højere sample rate vil øge troværdigheden af ​​optagelsen, men dette vil også øge file størrelse og mængden af ​​systemressourcer, der er nødvendige for at behandle lyden.
• Urkilde. Indstiller den digitale urkilde. Fra denne menu kan du indstille urkilden for din Quantum HD-grænseflade. Internt, Ekstern S/PDIF, Ekstern ADAT eller Wordclock (kun Quantum HD 8).
• Buffer Size (Windows only). Sets the Buffer Size. From this menu, you can set the Buffer Size for your Quantum HD interface from 16 to 2048 samples. Lowering the buffer size will reduce the overall latency. However, this will also increase performance demands on your computer. In general, you will want to set the buffer size as low as your system can safely support. If you begin to hear pops, clicks or distortion in your audio path, try raising the buffer size.
• Device Mode (HD8 only): Displays the current device mode.
• Input Format. Details your device, input channels, and bitrate.
• Outputformat. Detaljer om din enheds outputkanaler og bitrate.
• Firmware. Viser den aktuelle firmwareversion.
• Serienummer. Viser dit Quantum-serienummer.

Start af Universal Control Mixer
Universal Control’s Mixer can be launched from the Universal Control application (Start Page).

1. Åbn Universal kontrol.
2. From the Universal Control Start Page, click on the product card for the Quantum HD Control Panel (mixer).
3. Universal Control Mixer åbnes i et andet vindue.

Afslut Universal Control

For macOS-brugere:

• Vælg "Afslut Universal Control" fra macOS Application Menu, når Universal Control er forgrundsapplikationen.
• Brug standard macOS-tastaturgenvejen: Kommando + Q.

For Windows-brugere:

• Klik på "X" lukkeknappen i vinduets titellinje.

Universal kontrol mixer
Universal Control’s layout and functionality is similar to what is found on analog mixers and shares many elements with Fender Studio Pro’s mixer layout.

Navigationslinje
The navigation bar has two options to choose from:

• Scenes. Shows / Hides the Scenes panel. See section 2.2.7 Scenes for more information about how to use this feature.
• Indstillingspanel. Viser/skjuler indstillingspanelet (erstatter mixeren). Se afsnit 2.2.8 Indstillingspanel for mere information om, hvordan du bruger denne funktion.
• Power Button. Turns the mixer on or off. Turning the mixer “off” bypasses the mixer in Universal Control, which can be helpful if you would like to mix and create cue mixes directly in the DAW.

Kanal overview

Kanalindgange

• Hver kanalinputstrimmel styrer en tilsvarende Quantum-hardwareindgang eller virtuel input. Udgangen af ​​alle kanalindgange er altid ført til hovedudgangene 1 og 2 (undtagen når de er slået fra). Indgange kan valgfrit dirigeres til andre udgange via Sends og FlexChannel-kontrollerne. Universal kontrolkanalindgange er stort set de samme for alle indgange; der er dog nogle forskelle mellem de analoge og digitale indgange som angivet nedenfor.

Kanalindgangskontroller

• High Pass Filter (HPF). Engages/disengages an HPF at 80 Hz with a slope of 12 dB per octave.
• 48V. Tilkobler/frakobler 48V fantomstrøm til brug med kondensatormikrofoner.
• Autogain. Indstiller automatisk forstærkningen for den valgte kanal.
• Pad. Cycles through -20 dB or no pad attenuation (default). Pad does not affect the Line or Instrument inputs.
• Preamp Få niveau. Brug denne kontrol til at indstille forstærkningen (0 dB til +75 dB) for din mikrofon eller dit instrument.
• Line Input Level. If a line-level signal is connected through the TRS port of the combo jack, then preamp forstærkningskontrol skifter til en linjeniveaukontrol (-12 dB til +12 dB).
• Få værdi. Viser den absolutte værdi for den aktuelle forstærkning. Dobbeltklik på værdien for at indtaste en bestemt værdi.

Sender
Controls the send level of the audio being sent to the Return FlexChannel. Depending on your hardware, different amounts of outputs will be available as Sends. Loopback virtual outputs can be shown in Settings as well (see section 2.2.8 Settings Panel).

• Send destination. Viser det outputpar, som lyden sendes til.
• Send niveau. Styrer det overordnede niveau, der sendes til et outputpar.
• Note: If Speaker Switching is active, outputs 3 – 4 will be disabled for Sends.

Universal kontrol mixer

Blandingskontroller

• Pande. Indstiller panoreringspositionen for signalet i et stereomix (gælder også Sends).
• Stum. Slår signalet fra (gælder også afsender).
• Solo. Solo signalet (dæmper alle andre kanaler i hovedmixet).
• Mono / Stereo Link Skift. Kombinerer 2 tilstødende kanaler af samme type til en stereokanal.
• Nuværende niveauværdi. Viser den absolutte værdi for det aktuelle niveau. Dobbeltklik på værdien for at indtaste en bestemt værdi.
• Kanalmåler. Viser det aktuelle niveau for din mikrofon eller instrument-pre-fader.
• Kanal fader. Styrer det overordnede niveau af kanalen i Main Mix.
• Kanalnummer. Angiver kanalnummeret.
• Kanalikon. Vælg fra en liste over ikoner for kanalen
• Kanalnavn. Dobbeltklik for at oprette et brugerdefineret navn til kanalen.
• Kanal farve. Klik på mellemrummet for at vise kanalfarveindstillingerne.

FlexChannel Return
Inputkanaler er altid dirigeret til hovedudgange 1 og 2. Indgangene kan dog valgfrit dirigeres til enhver tilgængelig hardwareudgang eller Loopback-stream via Sends og FlexChannel.

• Tilbage Vælg. Vælger retur- eller tilbageløbsstrømmen, der skal styres af kanalstrimlen.
• Copy / Paste Mix: Copying the current mix allows you to quickly set up multiple mixes. Right-click on the fader for copy and paste options.
• Fader Flip: When Flip is activated, fader controls switch to represent the per-channel Send levels of the chosen Send destination. Faders will change to green to indicate Flip is active; when activated, the fader controls the send level rather than the channel volume.
• Stum. Slår lyden fra for den valgte Retur- eller Loopback-stream.
• Telefoner Lyt. Du kan lytte til et hvilket som helst af mixene ved at klikke på hovedtelefonikonet. Dette vil dirigere det valgte mix til Headphone 1 (hvis mere end én hovedtelefon), så du kan prøve dine cue-mix.
• Mono / Stereo skifte. Skifter kanalen mellem en stereokanal eller en summeret monokanal.
• Nuværende niveauværdi. Viser den absolutte værdi for det aktuelle niveau. Klik på værdien for at indtaste en bestemt værdi.
• Kanalmåler. Viser det aktuelle niveau.
• Kanal fader. Styrer det overordnede niveau for den valgte Retur- eller Loopback-stream.
• Kanalikon. Vælg fra en liste over ikoner for kanalen
• Kanalnavn. Dobbeltklik for at oprette et brugerdefineret navn til kanalen.
• Kanal farve. Klik på mellemrummet for at vise farvevælgeren.

Overvåg kontrol
Skærmkontrolstrimlen indeholder elementer relateret til hovedudgange, hovedtelefoner og højttalerskift.

• Hoved ud niveau. Dette er hovedniveaukontrollen for Quantums hovedudgange 1 og 2. Den udfører samme funktion som knappen på Quantums front- eller toppanel.
• Headphone Level. These is the level controls for Headphone Output 1 and 2. It performs the same function as the Knob on Quantum’s front or top panel when the Knob is switched to Headphone control. The Quantum HD 2 only has one headphone output.
• Svag. Dæmper hovedoutputtet med den mængde, der er indstillet i Indstillinger (standard er -10 dB)
• Højttalerskift. Når Speaker Switching er aktiv, skifter til enten højttalersæt A eller højttalersæt B. Bemærk, at denne indstilling ikke er tilgængelig og nedtonet som standard.
• Stum. Slår hovedudgangen fra. Mute påvirker ikke hovedtelefoner.
• Telefoner Lyt. Dette vil dirigere hovedmixet (output 1/2) til hovedtelefon 1.
• Level Value. Displays the absolute value for the current level. Click on the value to enter a
  specifik værdi.
• Overvåg målere. Disse målere viser signalniveauerne for monitormixbussen lige før monitorniveaukontrollen.
• Kanal fader. Styrer det overordnede niveau for hovedudgangene. Denne lydstyrkekontrol er uafhængig af hovedindkoderen. Hvis faderen skrues ned, sendes lyden ikke til hovedlydstyrkekontrollen.
• Kanalnummer. Angiver kanalnumrene.
• Channel Icon. Choose from a list of icons for the channel. All Icons can be shown/hidden from the Settings panel.
• Kanalnavn. Dobbeltklik for at oprette et brugerdefineret navn til kanalen.
• Kanal farve. Klik på mellemrummet for at vise farvevælgeren. Hele kanalen kan farvelægges i Indstillinger.

Scener
Universal Control giver dig mulighed for at oprette og gemme et bibliotek af "scener". En scene er som et snapshot af dit mix: Den gemmer hver kanalparameter for hver analog indgang, såvel som hver faders position, aux-mixene, kanal-mutes og soloer osv.

Scener giver metoder til at administrere Universal Control-mixerkonfigurationer som brugerdefinerede forudindstillede files. When a Universal Control Scene is saved, the current Universal Control configuration is saved to your computer. When a Scene is subsequently reloaded, Universal Control is returned to the same configuration state, regardless of any changes to Universal Control that were made in the interim.

• Ikon for scener ( ): Select to open (blue) and close (gray) the Scenes window.
• Save: Saves the current mixer configuration to the selected Scene (overwrite).
• Load: Loads the selected Scene (double-clicking the chosen Scene will also load it).
• Store Scene: Click the plus icon to save the current mixer configuration and give it a name.
• Delete Scene: Deletes the selected Scene.

Indstillingspanel
Globale parametre for Quantum og Universal Control er konfigureret i ruden Indstillinger:

Hardware Settings:

• Sends. Changes which outputs are available for Sends (For more information, check out Section 3.1.2).
• Main Encoder. Select which speaker(s) are controlled by the knob.
• Højttalerskift. Vælg adfærden for højttalerskift, når du trykker på hovedkontrolknappen.
• Headphone Source Selector (“HP Source”). Selects the source for the Headphone Output 1 or 2. Access to certain headphone sources is dependent on the Quantum model.
• S/PDIF Output Source. Selected which source is sent out of the S/PDIF RCA port.
• Mute knap opførsel. Vælg, om top- eller frontpanelets Mute-knap slår lyden fra ved hovedudgangene eller dæmper lyden.
• Dim mængde. Justerer, hvor meget dæmpning der anvendes, når dæmpning er aktiveret (standard er -10 dB)
• LED lysstyrke. Justerer den samlede lysstyrke for alle LED'er (standard er 100 %)
• Gendan fabriksindstillinger. Nulstiller alle parametre til fabriksindstillinger.

Brugergrænsefladeindstillinger:

• Farvelæg kanaler. Anvender den aktuelt valgte kanalfarve på hele kanalstriben.
• Peak Hold. Slår Peak Hold til eller fra.
• Show all Digital (Quantum HD only). Shows or hides all ADAT and S/PDIF inputs in the mixer. Hidden by default.
• Show all Loopback. Shows or hides all Loopback Inputs, Stream Mix Sends, and Flex Mix Stream Mixes in the mixer. Hidden by default.
• Edit Popup: Shows or hides the popup editor.
• Meter henfald. Indstiller målerens henfald til enten Langsomt, Medium eller Hurtigt.

Brug af Universal Controls mixer

Loopback
Loopback audio is the industry term for routing audio from one application to another. Applications that use audio interfaces, like your Quantum interface, are designed to receive audio from one audio device and send audio to one audio device. This means that most applications can only send to and receive from an audio interface, but not from other applications. This can present a challenge in certain situations. Fortunately, Quantum HD audio interfaces allow you to take audio from any of Universal Control’s mixer inputs (mics, guitars, computer audio, etc.) and send the combined audio to another application for the purpose of recording or live streaming.

Sådan bruger du Loopback
Hvis du ønsker at bruge Loopback-funktionen, skal du følge vejledningen nedenfor:

1. Make sure that your Quantum HD is selected as the Windows or macOS playback device.
2. In your DAW or software application, choose the channel input labeled Loopback 1 or Loopback 2. Any audio sent to Loopback 1 or 2 will be available as a virtual input in your DAW or other software applications (not all software applications support multichannel inputs).
   Note: Loopback inputs are disabled at sample-hastigheder på 176.4 og 192 kHz.
3. In Universal Control’s mixer window, adjust the send level to whichever Loopback send you’ve selected in Fender Studio Pro.
   • Loopback 1 Send niveau. Juster mængden af ​​lyd, du vil sende til Loopback stream 1.
   • Loopback 2 Send niveau. Juster mængden af ​​lyd, du vil sende til Loopback stream 2.
4. Når du har justeret Loopback-sendeniveauet, vil du bemærke, at måleniveauer vises i den DAW- eller softwareapplikationskanal, du har konfigureret. Når lysmåling vises, er du klar til at begynde at optage lyd.

ADVARSEL:
Sørg for, at kanalen i din DAW er slået fra, før du optager, for at undgå feedback-loops.

Quantum multikanal
Multichannel is a hardware and software operating mode that can be configured using Universal Control. Quantum HD 2 and HD 8 interfaces can be used as an all-in-one monitoring hub for some multichannel formats (depending on the amount of analog outs per device).
Når en flerkanalstilstand er valgt, vil knappen styre al tilsvarende højttalerlydstyrke på én gang. For mere information om hver af Multichannel-mulighederne, vedrview listen nedenfor:

• None: Knob control is disabled and unity audio will be sent out of all outputs.
• All: The knob will control the output volume for all outputs at the same time.
• 1 – 2: The default Main Encoder mode. The knob will control the output volume for Main Outputs 1 and 2.
• 1 – 4: The knob will control the output volume for Outputs 1, 2, 3, and 4 all at the same time.
• 1 – 6 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, and 6 all at the same time.
• 1 – 8 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, 6, 7, and 8 all at the same time.
• All + ADAT: The knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.

ADVARSEL:
Full-scale audio will be sent out of Main Outputs 1 and 2. Main Outputs 1 and 2 will be muted when this mode is selected to avoid damaging speakers or other equipment.

Using Your Quantum Interface

Som en lydgrænseflade

• The Quantum HD functions like other audio interfaces when used without the Universal Control application installed. Quantum HD’s class-compliant (macOS) and WDM drivers (Windows) enable it to be used for computer audio I/O routing with any compliant software with some limitations.

Standalone brug (HD 8 ADAT Preamp Udvidelse)
The Quantum HD 8 can be used to add mic pres to another Quantum HD running in audio interface mode (with Universal Control installed) or a third party audio interface that supports ADAT optical inputs as well as S/MUX and its variants. To use a second or third Quantum HD as a standalone preamp through ADAT, access the secondary or tertiary Quantum HD’s Global Settings when not connected to a computer and set the Standalone mode to “ADAT.” By default, this mode is set to “Mixer.”

• As long as the additional HD 8 is put into ADAT mode, and the clock source is set to externally clock via SPDIF, ADAT, or Word Clock, the 48V and Gain Knob controls will be present at the top of each ADAT fader.
• Note: When in ADAT mode, the knob of the HD 8 expansion will no longer control volume and will blink 3 times if turned in either Main or Headphone control modes.
• The knob will still control gain level if a channel is selected.
• If you select “All + ADAT” from the Main Encoder settings, the knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.
• Note: As with any of the other Main Encoder link modes, as outputs get assigned to be controlled by the knob, those outputs paths become unavailable as Sends for cue mix routing, etc.

 Send Routing Options
Quantum HD interfaces have two send options located in the Universal Control settings panel. Depending on which option is selected, ADAT Sends and computer playback channels (ex., USB 5/6) will become available or unavailable. In either mode, Loopback 1 and Loopback 2 are available as Sends on any input channel.

• Analog Out (default). When analog out is selected, Sends can only be routed to the physical analog outputs of Quantum (for example, Out 3/4, Out 5/6, etc.). When this option is selected, ADAT signals can be easily routed from your DAW.
• Analog + ADAT. When Analog + ADAT is selected, the mixer is reconfigured so that all analog and ADAT outputs are available as Sends on input channels. When this option is selected, the computer playback input channels (USB 5 – 10) will no longer be available in UC’s mixer and all ADAT signal routing must be done through Universal Control. In other words, ADAT will not pass if routed from a DAW.

NOTE:
På sample rates greater than 96 kHz, all digital inputs are disabled as well as Loopbacks 1 and 2.

Med universel kontrol

• Quantum HD and Universal Control can be used without a DAW or any other software. Using Universal Control without a DAW provides access to all Quantum HD functionality and simplifies the use of Quantum HD’s digital mixing and monitoring when a DAW is not needed.

Quantum I/O-drivernavne

• Each Quantum input and output has a channel number and name provided by the Quantum HD drivers on macOS and Windows. If an audio software application can access Core Audio / ASIO devices directly, it may be possible to designate specific inputs and/or outputs within the application.

Universelle kontrolindstillinger, der bibeholdes efter Power Cycle

• All currently active Main Mix settings (channel volume level, pan position, solo, mute, and stereo link) and monitor settings (main and headphone output levels) are saved to internal firmware before your Quantum HD are powered down, and recalled when power
  is reapplied.

Note:
Ændringer gemmes ikke øjeblikkeligt. Tillad venligst op til 10 sekunder, før indstillingerne gemmes på enheden, før du slukker.

Med en DAW (uden Universal Control)

• Når den bruges med en DAW, men uden Universal Control-applikationen, styrer DAW al signal I/O-routing og softwareovervågning.

Overvågning med DAW

• Universal Controls primære funktion er at overvåge Quantums input under live-optræden. Når softwareovervågning er aktiveret i DAW, skal Universal Control-indgangsovervågning deaktiveres for at eliminere fordoblede signaler.
• Sørg for at deaktivere inputmonitorering i Universal Control, når du bruger softwaremonitorering via DAW'en. Hvis Universal Controls inputmonitorering ikke er deaktiveret (lydløs kanal, fader nede eller mixerbypasset), phasing og/eller fordobling af det/de overvågede signal(er) vil forekomme, fordi indgangssignalet høres to gange – først fra DSP-mixet med lav latens (Universal Control) og kort derefter fra softwaremixet med højere latens (DAW).

Sådan deaktiveres inputovervågning i Universal Control

• For at deaktivere inputovervågning i Universal Control, når du bruger softwareovervågning i DAW, skal du åbne Universal Control og slå alle inputkanaler fra i Universal Control eller aktivere "Bypass Mixer" i Indstillinger. Universal Control kan derefter lukkes.
• Brug af en DAW uden Universal Control er en typisk arbejdsgang under mixdown, hvor overvågning med lav latens ikke er påkrævet, og bufferforsinkelse ikke er et problem, fordi sporene allerede er optaget. Når du optager nye spor, anbefales DAW- og Universal Control-arbejdsgangen (som beskrevet i det følgende afsnit).
• I dette scenarie fungerer Quantum som en lydgrænseflade. DAW'en tilgår og dirigerer Quantums lydgrænseflade I/O via enhedsdriverne. Audio I/O latenstid bestemmes af indstillingen I/O Buffer Size.

Med en DAW (med Universal Control)

• Universal Control bruges samtidig med en DAW, når der ønskes overvågning med lav latens. Denne arbejdsgang eliminerer fuldstændigt I/O-bufferforsinkelser forbundet med softwareovervågning. I dette scenarie bruges Universal Control til at styre al inputovervågning under optagelse, og DAW's softwareovervågningsfunktion bør være deaktiveret.

Softwareovervågning versus hardwareovervågning

• Softwareovervågning (lytning til live-input via DAW-mixeren) har mærkbar latenstid på grund af audio-interface I/O buffering. Hardwareovervågning via en lydgrænseflades interne DSP-mixer (f.eks. Universal Control-applikationen) har ikke mærkbar latenstid, fordi live-lyden internt dirigeres direkte fra indgangene til udgangene uden DAW I/O-buffering.

Overvågning med Universal Control

• Universal Controls primære funktion er overvågning af Quantum-input under live-optræden. Når den bruges sammen med en DAW, bruges Universal Control som en monitormixer, der fungerer separat fra DAW's softwaremonitormixer.
• Sørg for at deaktivere Software Monitoring i DAW'en, når du bruger Universal Control. Når Universal Control bruges til live input monitoring med en DAW, skal DAW'ens softwaremonitoreringsfunktion være deaktiveret. Hvis den ikke er det, skal duasing og/eller fordobling af det/de overvågede signal(er) vil forekomme, fordi indgangssignalet høres to gange – først fra DSP-mixet med lav latens (Universal Control) og kort derefter fra softwaremixet med højere latens (DAW).

Loopback
Quantum’s device drivers carry virtual (software only) input and output channels in addition to those directly associated with the hardware inputs and outputs. Loopback facilitates highly flexible signal routing via the DAW, without needing to reach behind the gear rack for manual cable patching. Additionally, since the loopback audio streams are in the digital domain, a pristine audio signal path is maintained without requiring additional A/D – D/A conversions. Loopback sends enable any input to be routed directly into Universal Control’s FlexChannel (see section 2.3.2 in this manual for more information).

Enhedens nulstilling
Hvis du støder på et problem med din Quantum, og du skal nulstille enheden, kan du nulstille til standardenhedsindstillingerne eller vende tilbage til en tidligere firmware.

Standard enhedsindstillinger
Om nødvendigt kan du gendanne standardmixeren (preamp gain, output levels, etc.) and system settings (speaker switching modes, headphone mix sources, etc). To restore the default system settings:

• I Universal Control skal du navigere til Indstillinger (tandhjulsikon)
• Tryk på knappen "Fabriksindstilling".
• En bekræftelsesboks vises
• Vælg "Nulstil" for at bekræfte eller "Annuller" for at annullere nulstillingen

Vend tilbage til forrige firmware
Sådan vendes tilbage til en tidligere firmware:

1. Afinstaller den aktuelle version af Universal Control
2. Installer den version af Universal Control, der har den tidligere firmware
3. Med Quantum tændt, åbn Universal Control og klik på "Opdater firmware"
4. En meddelelse vil sige, at din firmware er up-to-date og skal opdateres alligevel
5. Vælg "Opdater alligevel" og følg processen

Note:
If your Quantum HD ever becomes unresponsive, press and hold the knob while powering on to enter firmware recovery mode.

Quantum Control from Fender Studio Pro
Your Quantum HD interface can be controlled directly from Fender Studio Pro (only compatible with version 6.6.1 or higher). After configuring the inputs and outputs of your interface within Fender Studio Pro, you’ll have easy control over various channel parameters, including channel Preamp Gain, Phantom Power, High Pass Filter, Auto Gain and Pad (HD only). To set up your Quantum Interface in Fender Studio Pro, follow the directions below. Once all cable connections are made and you have updated the Quantum’s firmware:

1. Launch Fender Studio Pro.
2. Navigate to Studio Pro/Options/Audio Setup/Audio Device (macOS: Preferences/Audio Setup/Audio Device) to open the Audio Device settings window.
3. Vælg Quantum som både afspilnings- og optageenhed.
4. Konfigurer enhver anden lydenhed eller behandlingsindstillinger som ønsket.
5. Klik på OK.

I/O-opsætning

• Before creating your first song, it’s recommended that you first configure your Quantum Interface for input and output routing in Fender Studio Pro.
• To route Inputs and Outputs, go to Fender Studio Pro Preferences, then select “Audio Setup”. In the bottom left corner, select “Song Setup” to enter the Audio I/O Setup tab.

Tildeling af hardware I/O til software I/O-kanaler

• Hardwareindgange og -udgange er tildelt software I/O-kanaler i en matrixrouter, som er en visuel repræsentation af routingen. Softwarekanaler (mono og stereo) får hver en vandret række, og hardwareindgange og -udgange får lodrette kolonner. De punkter, hvor disse rækker og kolonner skærer hinanden, repræsenterer potentielle forbindelser eller ruter mellem hardware-I/O- og software-I/O-kanalerne.
• By default, Fender Studio Pro creates three Input Channels: one stereo and two mono. These channels are labeled Input L+R (stereo), Input L (mono), and Input R (mono). By default, the stereo Input Channel receives input from the first stereo hardware input pair of your selected audio device. The two mono Channels receive input from the same stereo hardware input pair. The Output Channel is labeled Main Out (stereo) and is routed by default to the first stereo hardware output pair of your selected audio device.
• For at oprette en rute mellem software-I/O-kanaler og hardware-I/O skal du klikke på den tomme firkant i skæringspunktet mellem den ønskede hardware-input eller -output og softwarekanal-input eller -output. En farvet firkant vises med en M-, L- eller R-label, der angiver, om ruten er en monorute (M) eller venstre eller højre side af en stereorute (L eller R).
• Bemærk: Ved højere sample rates, the number of available ADAT Inputs and outputs is reduced for each port. At 88.2/96 kHz, only ADAT channels 1–8 are available, and all digital is disabled at sample-hastigheder højere end 96 kHz. Utilgængelige ADAT-kanaler er angivet i kursiv tekst på Input-, Output-, Bus- og Insert-siderne i I/O-opsætningen.

Quantum Input Setup
From the Inputs tab, you can enable any or all of the inputs on your Fender Quantum audio interface that you’d like to have available. Use the “Add” button options below the matrix to add new inputs.

Integrerede kvantefunktioner

Opsætning af kvanteoutput
For at redigere udgangsrutingen skal du klikke på fanen "Output" og tilføje udgange ved hjælp af Tilføj-knapperne under matrixrouteren.

Default Device I/O Setup
We recommend that you create a default Audio I/O Setup that can be a starting point for all new Songs. This lets you immediately begin working on your new Song, with little or no preliminary setup. To do so, create software I/O channels for all of your audio device’s commonly used inputs and outputs and name them appropriately. Then, click on the “Make Default” button in the Audio I/O Setup menu, and a pop-up window appears to confirm that you wish to make the current I/O setup the default for new Songs. Click “Yes”, and from that point forward, all new Songs will be created with this audio I/O setup. You can always use the “Reset to Default” button to apply this configuration to a song.

Integrerede kvantefunktioner
Fender Studio Pro channel strips have integrated Quantum hardware controls built in when Quantum is selected as the Playback and Recording device in Studio One Pro. To access these control features, open the “Mix” console view from the Fender Studio Pro song page.

Kanalkontrolfunktioner
Kanalkontrolfunktionerne vil blive indlejret i toppen af ​​hver kanal.

• Preamp Få niveau. Brug denne kontrol til at indstille forstærkningen (0 dB til +75 dB) for din mikrofon eller dit instrument.
• Linjeindgangsniveau. Hvis et linjeniveausignal er tilsluttet gennem TRS-porten på combo-stikket, skal preamp forstærkningskontrol skifter til en linjeniveaukontrol (-12 dB til +12 dB).
• Få værdi. Viser den absolutte værdi for den aktuelle forstærkning. Dobbeltklik på værdien for at indtaste en bestemt værdi.
• Højpasfilter. Indkobler/deaktiverer en HPF ved 80 Hz med en hældning på 12 dB pr. oktav.
• Phantom Power (48V). Engages / disengages 48V phantom power for use with condenser microphones.
• Automatisk forstærkning. Indstiller automatisk forstærkningsniveauet for den valgte kanal.
• Pad: Reduces the overall gain level for the channel by -20 dB (microphone only).

Additional Fender Studio Pro Resources

Quantum Hardware Output Controls
Fender Studio Pro has integrated Quantum hardware output controls built in when Quantum is selected as the Playback and Recording device in Fender Studio Pro.

• Headphone Source Selector. Select the source for the Headphone Output 1 or 2.
• Overvåge. Vælg hvilken eller hvilke højttalere der styres af knappen.
• Svag. Dæmper hovedoutputtet med den mængde, der er indstillet i Indstillinger (standard er -10 dB).
• Stum. Slår hovedudgangen fra. Bemærk, at mute ikke påvirker hovedtelefoner.
• Speaker Switching toggle. When Speaker Switching is active, it changes to either speaker set A or speaker set B.
• Højttalerskift. Vælg adfærd for højttalerskift, når du trykker på skærmkontrolknappen.

Note:
If you do not see either of these Quantum controls within Fender Studio Pro, make sure that the “Audio device controls” option is checked in the channel options:

Additional Fender Studio Pro Resources

• Operating instructions for Fender Studio Pro is beyond the scope of this Owner’s Manual, but Fender Studio Pro comes bundled with an array of demo and tutorial materials. For more detailed information about all of the available features in Fender Studio Pro, check out the Fender Studio Pro User Manual. You can access this manual at any time while Fender Studio Pro is open by navigating to Help/Fender Studio Pro User Manual or by pressing the F1 key on your keyboard.
• 311 CESSNA CIRKEL
• CORONA, CALIF. 92878
• USA WWW.FENDER.COM
• ©2026 Fender Musical Instruments Corporation. All Rights Reserved. The Fender logo (plain and stylized) Fender Studio, and Fender Studio Pro are trademarks of FMIC. Mac, macOS, iOS, and iPadOS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH.
  Andre produktnavne nævnt heri kan være varemærker tilhørende deres respektive virksomheder. Alle specifikationer kan ændres uden varsel.

Ofte stillede spørgsmål