Hurtig startvejledning
for ThinkNode-M3(Meshtastic)
Think Node M3 Meshtastic Tracker
• Step 1: Turn on Bluetooth.
Press and hold the button for 3 seconds until the indicator light turns solid red and the buzzer sounds for 2 seconds, indicating that the device has successfully powered on. After a short wait, the indicator light will change to a slow-flashing blue, signaling that the device is ready for Bluetooth pairing.
• Step 2: Open the Meshtastic app. As shown in the image, tap the “+” icon in the interface, then tap “Allow” to add a device.
• Step 3: Select the device for Bluetooth pairing.
• Step 4: The blue indicator light turns off, indicating that the device has successfully connected.
Enhedsdel
LED indikation
| Rød | Rødt lys blinker langsomt | Opladning |
| Rødt lys forbliver tændt | Fuldt opladet | |
| Blå | Blåt lys blinker langsomt | Venter på Bluetooth-parring |
| Blåt lys blinker en gang | Dataoverførsel og -modtagelse | |
| Blåt lys forbliver tændt | Device and Bluetooth are initializing |
| Tænd | Long press for 3 seconds, red light stays on, buzzer sounds for 2 seconds |
| Sluk | Long press for 5 seconds, red light flashes quickly for 3 seconds, buzzer sounds for 3 seconds |
| SOS on / SOS off | Press the button three times in succession to activate the SOS mode and sound the buzzer; press it three times again to deactivate SOS. |
Parameter
| Produktnavn | ThinkNode-M3(Meshtastic) |
| Dimensioner | 64mm*64mm*10mm (Mounting base not included) |
| Grundmål | 68mm*68mm*10.2mm |
| Materiale | PC+ABS |
| Nettovægt | 38.5 g |
| Hovedstyring IC | nRF52840 |
| LoRa Chip | LR1110 |
| LoRa frekvensbånd | EU868, US915 |
| Antenne | Internal Onboard Antenna (GNSS/LoRa/WiFi/BLE) |
| Bluetooth | Bluetooth 5.0 |
| Batteritype | Lithium batteri |
| Batterikapacitet | 760mAh |
| Driftstemperatur | -20℃-60℃ |
| Strømindgang | 5V  1A |
Fremstillet i Kina
Dokumenter/ressourcer
 |
ELECROW ThinkNode M3 Meshtastic Tracker [pdfBrugervejledning ThinkNode-M3, ThinkNode M3 Meshtastic Tracker, Meshtastic Tracker, Tracker |