Dottsun IPB974 Remote Control
Specifikationer
- Lysstyrkeniveauer: Dæmpbar fra 10% til 100%
- Batterilevetid: Up to 320 hours on standby, 55 hours in active use
- Fjernbetjeningstype: RF fjernbetjening
- Registreringsafstand: 66ft without shelter
Produktbrugsvejledning
Tænd og sluk
- To power on the device, press the “Power ON” button on the remote control. The default brightness level is set to 50%. You can adjust the brightness using the dimming buttons.
- To power off the device, press the “Power OFF” button. The device will turn off completely.
Justering af lysstyrke
- You can adjust the brightness level by using the dimming buttons on the remote control. The brightness is dimmable from 10% to 100%.
- Press the corresponding buttons to increase or decrease the brightness level as desired.
Timer funktion
- The remote control features a timer function. Set the timer according to your preference by following the instructions provided in the user manual. The timer allows you to schedule automatic shut-off or other timed actions.
RF fjernbetjening
- The remote control operates using Radio Frequency (RF) technology. It has a detection distance of 66ft without any obstructions. When you press a button on the remote, the red indicator light will flash to indicate that the related feature is activated.
Brightness Dimmable
RF fjernbetjening
- The detection distance is 66ft without shelter.
- The red indicator light will flash when you press the button on the remote, which means the related feature is ON.
FCC-erklæring
Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:
- Denne enhed må ikke forårsage skadelig interferens
- Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.
Ændringer eller modifikationer, der ikke udtrykkeligt er godkendt af den part, der er ansvarlig for overholdelse, kan annullere brugerens ret til at betjene udstyret.
NOTE: Dette udstyr er blevet testet og fundet i overensstemmelse med grænserne for en Klasse B digital enhed i henhold til del 15 af FCC-reglerne.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Drej eller flyt modtagerantennen.
- Øg afstanden mellem udstyret og modtageren.
- Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
- Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.
Erklæring om strålingseksponering
- Enheden er blevet vurderet til at opfylde de generelle krav til RF-eksponering. Enheden kan bruges under bærbare eksponeringsforhold uden begrænsninger.
Ofte stillede spørgsmål
- Q: What should I do if the red indicator light does not flash when I press a button on the remote?
- A: If the red indicator light does not flash, first ensure that the batteries in the remote control are properly inserted and functional. If the issue persists, try resetting the remote control by removing and reinserting the batteries.
- Q: Can I use the device in areas with high levels of RF interference?
- A: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restrictions. However, it is recommended to avoid areas with high levels of RF interference for optimal performance.
Dokumenter/ressourcer
 |
Dottsun IPB974 Remote Control [pdf] Instruktioner IPB974, IPB974 Remote Control, Remote Control |