coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Netværkskonfiguration

1. Tænd for produktet
   • Align the opener to the slot
   • Drej batteridækslet mod uret for at åbne det.
   • Remove the battery insulation film to power
2. Tryk på RESET-knappen i 3 sekunder og slip den. Den røde LED blinker for netværkskonfiguration.

Installationsvejledning

Installationsposition
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Læs venligst manualen omhyggeligt og brug produktet korrekt
Tak for købetasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Produktbeskrivelse

Tips:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Produktparametre

• Product Name Zigbee Ambient Light Sensor
• Wireless Protocol Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm