Manufacturer of motorized window treatments, including electric curtain tracks, roller blind motors, and smart home remote controls.
Raex is a provider of intelligent window covering solutions, specializing in the design and manufacture of motorized systems for curtains, blinds, and shutters. Their product lineup features quiet and efficient tubular motors, electric curtain tracks, and a variety of wireless remote controls (such as the YR series) that integrate seamlessly with modern smart home ecosystems. Raex products focus on convenience and automation, offering user-friendly features like electronic limit setting, intermediate position stops, and group control channels for managing multiple window treatments simultaneously.
Seneste manualer fra manuals+ kurateret til dette mærke.
Almindelige spørgsmål om manualer, registrering og support for dette mærke.
To pair the remote, press and hold the 'Setting Code' button on the motor for about 3 seconds until the LED light turns on. Then, immediately press the 'Channel Setting' button (often located on the back of the remote) until the motor's LED flashes, indicating a successful pairing.
To set the upper limit, hold the 'Channel Setting' and 'Up/Open' buttons simultaneously for roughly 5 seconds until the motor enters limit setting mode. Move the blind to the desired position and confirm. Similarly, use 'Channel Setting' + 'Down/Close' to set the lower limit.
To clear all paired channels, press and hold the motor's 'Setting Code' button for 3 seconds until the LED turns on. Release the button, then press and hold it again for approximately 7 seconds until the LED turns off. This resets the motor's memory.
Battery requirements vary by model. The YR2188B and YR2118B typically use a CR2032 coin cell battery, while models like the YR3202 may require AAA batteries. Always check the battery compartment or label for the correct type.