elero is a leading German manufacturer of electric drives and control systems for roller shutters, awnings, venetian blinds, and rolling doors.
elo is a globally recognized manufacturer of drive and control technology for the building automation sector. A subsidiary of the Nice Group, elero specializes in developing robust motors and intelligent control systems for roller shutters, awnings, Venetian blinds, and rolling doors. Based in Schlierbach, Germany, the company is known for its focus on quality, durability, and innovation in the field of tubular motors and radio control systems.
Their product portfolio ranges from standard wired motors to advanced bidirectional radio systems (such as the ProLine series) that integrate seamlessly with smart home environments. elero solutions offer user-friendly operation, automated weather-dependent control via sun and wind sensors, and reliable performance for both residential and commercial applications.
Seneste manualer fra manuals+ kurateret til dette mærke.
Do you have a manual for an elero drive or controller? Upload it here to help others set up their automation systems.
Se videoer om opsætning, installation og fejlfinding for dette mærke.
Almindelige spørgsmål om manualer, registrering og support for dette mærke.
To reset many elero motors, press and hold the P button (or a specific button combination like UP+DOWN+P) on your programmed transmitter for approximately 14 seconds until the motor jogs or beeps to confirm the reset. Consult your specific model's manual for the exact sequence.
elero motors are equipped with thermal protection. If the motor runs continuously for several minutes (typically 4 minutes), it may overheat and switch off automatically. Wait approximately 10 to 20 minutes for the motor to cool down before operating it again.
Put the receiver into learning mode (often by switching the power off and on again). With the new transmitter, press the programming button (P) until the motor reacts (jogs). Then follow the sequence to assign the UP and DOWN directions as described in your specific transmitter manual.
On the Lumero sensor, the LED flashing pattern indicates the current operating mode or status. For example, 1 flash usually indicates Awning mode, 2 flashes for Visual protection mode, and 3 flashes for Roller shutter mode.