DJPOWER Manuals & User Guides

DJPOWER (Guangzhou DJ Power Electronic Technology Co., Ltd.) is a professional manufacturer dedicated to the research, development, and production of stage effects equipment. The company creates a wide array of atmospheric generators such as fog machines, hazers, snow machines, bubble units, and CO2 jets.

These products are designed for concerts, theater productions, nightclubs, and touring events, offering reliable performance and DMX control capabilities. DJPOWER focuses on innovation and safety, providing robust solutions for lighting designers and event technicians worldwide.

• What type of fluid should I use in my DJPOWER machine?

  It is highly recommended to use only DJPOWER branded consumables (such as PRO-X.2 snow fluid, PRO-P bubble fluid, or PRO-C fog fluid) specifically designed for your model. Using third-party fluids can cause blockages, damage the heater core, and void the warranty.

• How do I clean my DJPOWER fog or bubble machine?

  Before cleaning, always disconnect the machine from power. Use distilled water or a specialized cleaning solution to flush the system if the manual permits. Some models have a built-in cleaning mode accessible via the menu. Refer to the specific user manual for the correct maintenance procedure to prevent clogging.

• Can DJPOWER machines be controlled via DMX?

  Yes, most professional DJPOWER units, such as the H-S6 Snow Machine and WP-1S Bubble Fogger, feature 3-pin and/or 5-pin DMX inputs. DMX channel assignments (e.g., for pump volume or fan speed) can be found in the DMX protocol section of the user manual.

• Hvad skal jeg gøre, hvis overbelastningsbeskytteren udløses?

  If the machine shuts off due to overload, disconnect it from the power source and wait at least 15 minutes for it to cool down. Once cooled, press the reset button on the breaker (usually located near the power switch) and reconnect the power.

• Is it safe to mount DJPOWER machines upside down?

  Mounting capabilities vary by model. While some units like the H-S6 Snow Machine can be rigged in various orientations, others like the WP-1S Bubble Fogger must be operated on a flat, level surface to prevent fluid leakage. Always check the 'Mounting and Rigging' section of your specific manual.