A world-leading manufacturer of access automation solutions, including sliding and swing gate motors, garage door operators, and traffic barriers.
Centurion Systems (Pty) Ltd, almindeligvis kendt som CENTURION or CENTSYS, is a prominent manufacturer of access automation and security equipment. Established in 1986 and headquartered in South Africa, the company designs and produces a wide range of products including sliding and swing gate operators, garage door motors, traffic barriers, and proximity access control systems.
Renowned for reliability and innovation, CENTURION products—such as the iconic D5 og D6 SMART gate motors—are exported globally to over 70 countries. The brand focuses on providing robust security solutions for residential, commercial, and industrial applications, characterized by high-speed operation, battery backup capabilities, and intelligent mobile interface configuration.
Seneste manualer fra manuals+ kurateret til dette mærke.
Almindelige spørgsmål om manualer, registrering og support for dette mærke.
To operate your gate manually (e.g., during a power failure or malfunction), locate the manual release lever on the motor unit. Unlock it using the key provided with your installation, and pull the lever to disengage the gearbox. The gate should now slide or swing freely.
Beeping usually indicates a system alert. A periodic beep often signals that the backup battery is low or failing. Multiple rapid beeps may indicate a collision detection, an obstruction, or a beam obstruction. Check the controller display or LED status for specific error codes.
On newer SMART models, remotes are added via the MyCentsys Pro mobile app or through the onboard interface menu under 'Remotes' > 'Add Remote'. For older models, you typically press the 'Learn' button on the controller board and then press the desired button on the remote transmitter.
Warranty terms vary by region and product, but CENTURION typically offers a 24-month carry-in warranty on main equipment, subject to installation by qualified technicians and proper usage according to the manual.
Limit setup is automated on SMART models. Access the setup wizard via the MyCentsys Pro app or the physical controller interface. Select 'Limits Setup' and follow the prompts to allow the gate to learn its open and closed positions automatically.