BYTEUP D12Pro Bluetooth Label Maker Instruction Manual

BYTEUP D12Pro Bluetooth Label Maker

Overview

The BYTEUP D12Pro is a Bluetooth thermal label printer that:

• Connects to smartphones via app
• Prints labels without ink (thermal technology)
• Supports multiple fonts, icons, and templates
• Læs venligst brugsanvisningen omhyggeligt, før du bruger produktet.

Specifikationer

Varecheckliste

Produktintroduktion

1. Power-knap
   • Tryk og hold i 2 sekunder for at tænde/slukke.
2. Nulstil nøgle
   • When the printer is not responding, try inserting the needle into the reset hole until the power indicator light goes off and the device shuts down. If needed,press and hold for 2 seconds to turn on the device.
3. Type-C port
   • Charged with mobile phone charger or power bank. (Input Power:5V— 2A)

Opladning Introduktion

• Please connect one end of the USB cable to the device and the other end to a SV= 2A adapter or computer USB port for charging;
• Opladningstid: ca. 3 timer;
• We recommend you to use mobile phone chargers for charging;
• Hvis det ikke bruges i længere tid, skal det oplades hver 3. måned for at undgå langvarigt naturligt tab af litiumbatteriet.

NOTE

• Working environment: Use at the ambient temperature of 5°C~40°C;
• Caution! This product doesn’t contain a power adapter. If consumers use a power adapter for a power supply, please buy a power adapter that has obtained CE and FCC certification and meets the standard requirements. The output specifications of the adapter shall comply with 5V=-2A.

Sådan bruges

Brug overview

APP download

• Søg efter [AiYin] på Google Play eller App Store.
• Scan the following QR code to download the app.
• This product needs to be connected to the printer in the App
• Due to the requirements of the mobile phone system, the Android mobile phone will use the user’s geographic location when connecting,so that the user needs to turn on the GPS and confirm the authorization.
• Denne app understøtter kun telefoner med Android 7.0 eller iOS 11.0 eller nyere systemer.

Printerstart

• Per button of the printer
• for 2 seconds to turn on the printer.

Power-knap Beskrivelse

Indikator lys

NOTE

• Auto power off: The printer will automatically power o ffafter 20 minutes without operation.You can set the timer in the App.

Tilsluttet printer

1. Åbn AiYin-appen.
2. Click to search for printer Bluetooth and connect. or scan thedevice connection QR code by printing from printer after double clicking the power button.

NOTE

• When connecting the device in the App, please make sure that your printer is turned on and the Bluetooth of your mobile phone is turned on
• Due to the requirements of the mobile phone system,the Android mobile phone will use the user’s geographic location when connecting, so that the user needs to turn on the GPS and confirm the authorization.
• Please pair Bluetooth in the app, do not pair Bluetooth in the phone settings.

Installationsforbrugsvarer

Vejledning til installation af papir

1. Åbn låget.
2. Læg papir i.
3. Luk låget.

Rediger Udskriv

1. Åbn appen og vælg den korrekte papirstørrelse.
2. Vælg udskrivningsmetode til redigering.
3. Rediger udskrivningsindhold.
4. Klik på udskriften efter redigering.

Rengør printerhovedet

1. Please turn offthe printer and open the printer cover and take out the paper.
2. Dyp en bomuldsklud eller vatpind med medicinsk alkohol, og tør forsigtigt langs midten til periferien af ​​printerhovedet.
3. Efter rengøring af printerhovedet må du ikke bruge printeren med det samme. Vent i 1 til 2 minutter, og brug derefter printeren, efter at alkoholen er fuldstændig fordampet.

NOTE

• Rør venligst ikke direkte ved printhovedet for at undgå beskadigelse. Rør især ikke direkte ved printhovedet umiddelbart efter udskrivning for at undgå overophedning og skoldning.

FCC-erklæring

Denne enhed overholder del 15 af FCC-reglerne. Driften er underlagt følgende to betingelser:

1. Denne enhed må ikke forårsage skadelig interferens, og
2. Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules: These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions.may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment o ffand on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Drej eller flyt modtagerantennen.
• Increase the separation between the equipment and receive[
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

Enheden er blevet evalueret til at opfylde generelle krav til RF-eksponering. Enheden kan bruges under bærbare eksponeringsforhold uden begrænsninger.

ICC warning

Radio Standards Specification RSS-Gen, issue 5-English:
Denne enhed indeholder licensfrie sendere/modtagere, der overholder Innovation, Science and Economic Development Canadas licensfrie RSS('er). Betjening er underlagt følgende to betingelser:

• Denne enhed må ikke forårsage interferens.
• Denne enhed skal acceptere enhver interferens, inklusive interferens, der kan forårsage uønsket drift af enheden.

RF-eksponeringserklæring:

• Enheden er blevet evalueret til at opfylde generelle krav til RF-eksponering. Enheden kan bruges under bærbare eksponeringsforhold uden begrænsninger.

Garantikort

• Retur
• Udveksle
• Repir