BSEED W-SD Multi Function Power Meter
nøglefunktion
Produktintroduktion
The multi – functional Wlfl guide rail meter adopts a rail – type design, which is small in size, compact instructure and simple in installation; it uses an LCD display screen to display current, voltage, electricity, power,frequency and other electrical parameters, is convenient for users to acquire data and easy to operate. It hasgood anti – electromagnetic interference capabilities, meets various needs of power management, facilitates therealizationof terminal – intelligent power metering, and facilitates the retrofitting of power meters in the lateltransformation of the lighting system. It is widely used in commercial squares, science and technology parksuniversities and other occasions where billing is required, It can also be jointly deployed with energyconsumption monitoring and energy management systems. its application scope includes property bilingmanagement, electricity metering, power demand – side management, energy management andenergy-saving analysis, Other low – voltage power systems, etc.
Tekniske parametre
| Vurderet voltage | AC 220V/110v |
| Operation voltage rækkevidde | AC 80V-300V |
| Frekvens | 50/60Hz |
| Effektområde | 0-99999 kWh |
| Tidsinterval | 0-999 dage |
| Effektfaktor | 0-1.0PF |
| Temperaturområde | -40-150°C |
| Overvoltage indstillingsområde | 130-300V |
| Undervoltage indstillingsområde | 75-21ov |
| Overcurrent setting range | 1-63A |
| Overpower setting range | 1-15KW |
| Nominel isolering voltage | 400V |
| Output kontakter | 1 NEJ |
| Mekanisk liv | 10,000 gange |
| Beskyttelsesklasse | lp30 |
| Højde | ::,2000m |
| Fugtighed | 550%at40°C(non-condensing) |
Function Introduction, Default Settings
| Valgmuligheder | Indstillingsområde | Standard parametre |
| Overvoltage
beskyttelse |
230-300V | 270V |
| Undervoltage
beskyttelse |
110-21ov | 170V |
| Overstrøm
beskyttelse |
0.1-63A | 40A |
| Overbelastningsbeskyttelse | 1-15KW | 8. 8KW |
| Elektrisk energi
beskyttelse |
0-99999 kWh | 99999kwh |
| Overtemperatur
beskyttelse |
0-150°( | 85°C |
| Number of closures | 1-30 gange | 5 gange |
| Closingtime | 1-600 sekunder | 30 sekunder |
| Electricityclearing | Til/Fra | slukket |
| Timing clearing | Til/Fra | slukket |
| Power-up operation | Close/open/hold | holde |
| Overvoltagedelay
beskyttelse |
1-600 sec/off | slukket |
| Undervoltagedelay
beskyttelse |
1-600 sec/off | slukket |
| Overcurrent delay
beskyttelse |
1-600 sec/off | slukket |
| Overloaddelay
beskyttelse |
1-600 sec/off | slukket |
| Overtemperatur
delayprotection |
1-600 sec/off | slukket |
structural analysis
DIMENSIONER
Produktstørrelse
Ledningsdiagram
Set function operation
Press the set key for 5 seconds to enter the settings page, give an example of the “Overvoltage Protection” setting, click the
key cursor to move to the “Overvoltage Protection” position, press the set key to select, press the
key to adjust to the required value, press the set to save after the adjustment is completed, and press the key to select other settings. If you do not need to set it, press the
key to move the cursor to the exit position, and then press set to return to the home page. The other settings can be the same as the “Overvoltage Protection” setting method.
Set function operation
Download Smart Life APP 
or Graffiti APP Smart Connection
WIFI connection or reset operation method: Long press the wifi key 5-10s wifi indicator light will flash, turn on the phone Bluetooth, then open the Smart Life APP, click “+” in the upper right corner, select “Add Device”, wait for the device to scan out the device, click on the device to select the wifi name, enter the password to wait for the device to be added successfully.
MERE INFORMATION
Dokumenter/ressourcer
 | W-SD Multi Function Power Meter |
Referencer
- Brugermanualmanual.tools