VEVOR S4040 CNC Router Machine Brugervejledning

1. Introduktion

This manual provides essential information for the safe and efficient operation of your VEVOR S4040 CNC Router Machine. This 3-axis wood engraving and milling machine features a 300W spindle, a 15.75 x 15.75 x 2.36 inch working area, and an offline controller. It is designed for precise engraving and cutting on various materials including wood, acrylic, MDF, leather, plastic, foam, vinyl, and soft metals.

Læs venligst denne manual grundigt, inden du bruger maskinen, for at sikre korrekt brug og for at forhindre skader eller personskade.

2. Sikkerhedsinstruktioner

Always prioritize safety when operating the CNC router machine. Failure to follow these instructions may result in serious injury or damage to the equipment.

• Læs manualen: Forstå alle instruktioner og advarsler før brug.
• Personligt beskyttelsesudstyr (PPE): Always wear safety glasses to protect your eyes from flying debris. Consider hearing protection and a dust mask, especially when working with materials that produce fine particles.
• Arbejdsområde: Sørg for, at dit arbejdsområde er rent, godt oplyst og fri for forhindringer. Hold børn og uautoriseret personale væk fra maskinen under drift.
• Sikkert arbejdsemne: Altid sikkert clamp your material to the workbed to prevent movement during engraving or cutting.
• Nødstop: Gør dig bekendt med placeringen og betjeningen af ​​nødstopknappen.
• Strømafbrydelse: Disconnect power before performing any maintenance, adjustments, or when changing tools.
• Værktøj: Use only sharp, appropriate cutting tools for the material being processed. Dull or incorrect tools can cause kickback or breakage.
• Ventilation: Ensure adequate ventilation, especially when working with materials that produce fumes or dust.
• Elektrisk sikkerhed: Betjen ikke maskinen med våde hænder eller i damp conditions. Ensure all electrical connections are secure and properly grounded.
• Gå aldrig uden opsyn: Lad ikke maskinen køre uden opsyn.

3. Pakkens indhold

Upon unpacking, verify that all components are present and undamaged. If any items are missing or damaged, contact VEVOR customer support immediately.

• 1 x CNC Router Machine (main unit)
• Offline controller
• Strømadapter
• USB kabel
• Assorted Engraving Bits
• Clamps
• Skruenøgler og unbrakonøgler
• Børste
• Other necessary accessories for assembly

Image: VEVOR S4040 CNC Router Machine with its various included accessories, such as the offline controller, power supply, USB cable, and tools.

4. Opsætning

The VEVOR S4040 CNC Router Machine features a pre-assembled design for quick installation. Key components come pre-assembled and pre-wired, simplifying the setup process.

4.1 Monteringstrin

1. Udpak komponenter: Carefully remove all parts from the packaging and place them on a clean, stable surface.
2. Connect Pre-assembled Modules: The machine consists of a few main pre-assembled modules. Follow the included quick start guide or detailed assembly instructions to connect these modules. Typically, this involves attaching the gantry to the base and securing the spindle assembly.
3. Sikker ledningsføring: Ensure all pre-wired connections are properly seated and secured. Use cable ties if necessary to manage cables and prevent them from interfering with moving parts.
4. Strømtilslutning: Connect the power adapter to the machine and then to a grounded electrical outlet. Do not power on yet.
5. Computerforbindelse (valgfrit): If you plan to operate the machine via a computer, connect the USB cable from the machine to your computer.

Image: The VEVOR S4040 CNC Router Machine shown fully assembled, ready for operation.

5. Betjeningsvejledning

The VEVOR S4040 offers both offline control via its 2.4-inch touchscreen controller and online control through compatible software.

5.1 Offline-kontrol

The 2.4-inch touchscreen offline controller allows you to operate the machine without a computer connection.

1. Prepare G-code: Save your G-code files (design instructions) onto a USB drive.
2. Indsæt USB-drev: Plug the USB drive into the offline controller.
3. Tænd: Turn on the machine's power switch.
4. Vælge File: Use the touchscreen interface to navigate and select your desired G-code file.
5. Placering af emne: Secure your material on the workbed using the provided clamps.
6. Sæt oprindelse: Manually move the spindle to the desired starting point (origin) for your engraving/cutting job and set the X, Y, and Z axes origin through the controller.
7. Start drift: Initiate the engraving or cutting process from the controller.
8. Juster spindelhastighed: Use the rotary knob on the machine to precisely control the spindle speed during operation.

Billede: Et nærbillede view of the 2.4-inch touchscreen offline controller, showing its interface for file selection and machine control.

5.2 Software Compatibility (Online Control)

The machine is compatible with all software that supports GRBL f1.1 firmware. Popular compatible software includes:

• CNC (Candle): Supports Windows 7/8/10/11 and macOS.
• Easel: Supports Windows 7/8/10/11, macOS, and Linux.
• LaserGRBL: Supports Windows 7/8/10/11 and macOS (via Virtual Machine).
• LightBurn: Supports Windows 7/8/10/11 and macOS.

To operate via computer, install the necessary drivers and software, connect the machine via USB, and follow the software's instructions for loading G-code, setting parameters, and initiating jobs.

Image: The VEVOR S4040 CNC Router Machine connected to a laptop, demonstrating its compatibility with various design and control software.

5.3 Engraving and Cutting Materials

The VEVOR S4040 is suitable for a wide range of materials:

• Wood (hardwood, softwood, MDF)
• Klar akryl
• Læder
• Plast
• Skum
• Vinyl
• Soft Metals (e.g., aluminum, brass)

Image: The VEVOR S4040 CNC Router Machine actively engraving a detailed lion head design into a piece of wood, showcasing its precision.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your CNC router machine.

• Rensning: After each use, clean the work area, rails, and lead screws to remove dust, chips, and debris. Use a brush or vacuum. Avoid using compressed air directly on sensitive electronic components.
• Smøring: Periodically apply a small amount of appropriate lubricant to the linear rails and lead screws to ensure smooth movement. Refer to the manufacturer's recommendations for lubricant type and frequency.
• Tjek forbindelser: Regularly inspect all electrical connections, cables, and mechanical fasteners to ensure they are secure. Tighten any loose screws or bolts.
• Spindelpleje: Keep the spindle clean and free of debris. Ensure proper ventilation around the spindle motor to prevent overheating. The spindle motor features current detection protection, extending its lifespan up to 5,000 hours.
• Værktøjsinspektion: Inspect cutting bits before each use for sharpness and damage. Replace dull or broken bits immediately.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på. Kontakt VEVORs kundesupport, hvis du har problemer, der ikke er nævnt her.

8. Specifikationer

Detailed technical specifications for the VEVOR S4040 CNC Router Machine.

Image: The VEVOR S4040 CNC Router Machine with its overall dimensions and working area clearly indicated.

9. Garanti og support

For garantioplysninger, teknisk support eller serviceforespørgsler, kontakt venligst VEVORs kundeservice. Se din købsdokumentation eller den officielle VEVOR-forhandler. webwebstedet for specifikke garantivilkår og kontaktoplysninger.

When contacting support, please have your model number (S4040) and purchase date available.