Secretlab Magnus Evo elektrisk stående skrivebord brugsanvisning

Indledning

This manual provides essential information for the safe and efficient use of your Secretlab Magnus Evo Electric Standing Desk. Please read these instructions thoroughly before assembly and operation. Keep this manual for future reference.

Vigtige sikkerhedsoplysninger

Always ensure the desk is on a stable surface and within its weight limit (265 lbs). Use the electric height adjustment mechanism with caution to avoid injury. Keep fingers and other body parts away from moving parts. Always follow the manufacturer's instructions for assembly, use, and maintenance.

• Vægtgrænse: Overskrid ikke den anbefalede maksimale vægt på 120 kg.
• Obstruction Clearance: Ensure the area around the desk is free from obstacles during height adjustments. Maintain at least 25mm (1 inch) of clearance around all desk edges.
• Strømforsyning: Only use the provided power cord and connect to a compatible power outlet.
• Børn og kæledyr: Hold børn og kæledyr væk fra skrivebordet under brug for at forhindre skader.
• Opretholdelse: Regularly inspect the desk for any loose parts or damage. Do not operate if damaged.

Hvad er der i æsken

The Secretlab Magnus Evo is packaged in a single box. Before beginning assembly, verify that all necessary parts are present by referring to the list below. Do not remove parts from their plastic coverings until required for assembly.

Billedbeskrivelse: A detailed diagram illustrating all components included with the Secretlab Magnus Evo desk, such as the desk top, desk extensions, leg columns, desk feet, cable tray, finishing caps, magnetic frame covers, and power cord. Various screws and an assembly tool kit are also shown.

Inkluderede komponenter:

• Desk Top (A)
• Desk Extension (Left and Right) (B)
• Right Leg Column (C)
• Left Integrated Power Supply Column (D)
• Mounting Bracket (Left and Right) (E)
• Cable Tray (F)
• Desk Feet (Left and Right) (G)
• Finishing Cap (H)
• Magnetic Frame Cover (I) (for MAGNUS Evo XL only)
• Power Cord (J)
• Assembly Tool Kit (Magnetic Screwdriver Handle, Reversible Torx Screw Bit, Screw Cap, Side Frame Screws, Main Frame Screws, Mounting Bracket Screws, Cable Tray Screws, Table Feet Screws, Spare Screws, Screw Covers)

Opsætning og montering

Assembly requires at least two people. Follow the steps outlined in the video below for a complete assembly guide.

Vigtige monteringstrin:

1. Udpakning: Carefully remove all components from the packaging. Keep parts in their protective coverings until needed.
2. Assembling Desk Extensions: Remove cardboard covers from the desk top. Slide the side frames outward. Align and insert desk extensions into both sides of the desk top, ensuring a minimal gap. Secure with Torx T25 screws and cover with screw caps.
3. Placing Integrated Power Supply: Decide whether to install the power supply column on the left or right side based on your power outlet's proximity.
4. Connecting Leg Columns: Place the leg columns (including the power supply column) onto the desk frame. Plug the corresponding cables from the leg columns into the control box. Tuck any unused cables into the desk frame. Insert the leg columns downwards and push outward to slot them into place. Fully tighten the fasteners with a Torx T30 screwdriver.
5. Assembling Cable Tray: Align the mounting brackets for the cable tray, ensuring the magnetic side faces the front. Screw in the mounting bracket screws. Place the cable tray onto the brackets, aligning it with the alignment notches, and rotate it downward to magnetically snap it into place. Secure with cable tray screws.
6. Assembling Desk Feet: Guide the cable from the leg column through the opening in the middle of the desk foot. Ensure the longer end of each foot faces toward the front of the desk. Hold each desk foot in place and screw in the desk feet screws following the numbered order.
7. Finpudsninger: Insert the finishing caps into the front and back of the side frame. If assembling a Magnus Evo XL, snap the magnetic frame covers onto both sides of the main frame.
8. Flipping the Desk Upright: With at least two people, place the packaging foam layer next to the desk. Hold the desk top and side frame firmly. Gently tilt the desk, rotating it 90 degrees until the control panel is facing downwards and resting on the foam layer. Then, gently tilt the desk again, rotating it 90 degrees to an upright position. Ensure the desk is stable and balanced before releasing dit greb.
9. Powering the Desk: Connect the power cord with the socket located at the bottom of the leg column. Plug the other end of the power cord into a compatible power outlet.

Betjeningsvejledning

This section details how to operate your Secretlab Magnus Evo desk, including calibration, height adjustment, and using presets.

1. Calibration/Reset

The Magnus Evo must be calibrated prior to its first use and reset after being disconnected from the power supply or after sustaining any impact on the desktop. Ensure the area around your desk is free from obstacles.

1. Slide the standby switch to the right to activate the control panel.
2. Press and hold the 'Down' button.
3. After a few seconds, the display will show "RST" and the desk will automatically start moving downwards until it reaches its lowest position.
4. Do not release the button until a beep is heard. The calibration process is complete.

2. Højdejustering

To adjust the height of your Magnus Evo, press and hold the 'Up' or 'Down' button until the desk reaches your desired position. You can press the button for precise height adjustments down to the millimeter.

3. Saving Height Into Memory (Presets)

The desk allows you to save up to three preferred height presets for quick transitions.

1. First, set the desk to your preferred height using the 'Up' or 'Down' buttons.
2. Press the 'S' button.
3. Then press the desired preset button (1, 2, or 3) to save the current height as a preset.
4. To recall a preset height, simply press the corresponding preset button.

4. Standby-kontakt

The control panel can be disabled to prevent accidental activation or movement of the desk.

• Slide the standby switch to the left to turn it off.
• Slide it to the right again to turn it back on.

Kabelstyring

The Secretlab Magnus Evo features integrated cable management solutions to keep your workspace tidy.

1. Magnetic Drop-Down Cable Management Tray

This spacious tray is designed to stow your power strip and chargers, keeping them out of sight.

• When adjusting the cable management tray, always use the handle located in the center.
• To open the tray, push the top of the handle down to release it from the magnets.
• To close it, lift the handle upward. Magnets will snap the tray back into place.

2. General Cable Organization

Utilize the magnetic features of the desk to organize your cables.

• Organize loose cables using cable ties and cable sheaths on the rear metal desk surface.
• Secure cables with magnetic cable anchors, routing them to keep your cables tidy and tangle-free.

Ergonomiske retningslinjer

Achieving an optimal ergonomic posture is crucial for comfort and health during long periods of work or gaming.

1. Sitting Ergonomics

1. Adjust your chair so your feet are fully flat on the floor.
2. Keep your knees bent at 90 degrees.
3. Adjust armrests so your elbows are bent at 90 to 120 degrees.
4. Adjust your head pillow to support your neck, ensuring your back is in a neutral position.
5. Adjust the height of your Magnus Evo so your armrests are level with the desktop.
6. Adjust and position the top of your monitors at eye level.

2. Standing Ergonomics

1. Stand with your feet shoulder-width apart, keeping your shoulders relaxed and back straightened.
2. Increase the height of your Magnus Evo to your preferred standing height.
3. Adjust and position the top of your monitors at eye level.
4. Ensure that your elbows are bent at 90 degrees while typing or using the mouse.

Tilbehør og tilføjelser

The Secretlab Magnus Evo desk is compatible with a range of Secretlab desk add-ons and accessories designed to enhance your workspace.

1. Secretlab Magnetic Headphone Hanger

This hanger can be attached to the extreme sides of the desk for convenient headphone storage.

2. Secretlab MAGRGB Diffused LED Strip

This LED strip can be attached to the underside of the Magnus Evo for ambient lighting.

3. Secretlab MAGNUS Monitor Arms

Various monitor arm configurations (single, dual, heavy-duty, and vertical monitor stand) are compatible with the Magnus Evo. Always install desk add-ons with a C-clamp mount. Before installing, wipe down the desk surface with a lightly damped microfiber cloth to remove any dust or debris. Lift the clamps and slide them when adjusting to your desired position, then tighten the mounts to secure. Avoid mounting them over the desk seams.

4. Secretlab Premium PC Mount

The Premium PC Mount can be installed on either side of the Magnus Evo. On the Magnus Evo, it supports a PC up to 22cm (8.6 inches) in width. On the Magnus Evo XL, it supports a PC up to 29cm (11.4 inches) in width. If your PC is taller than 44cm (17.3 inches), it is recommended to save the minimum height of your Magnus Evo at 78cm as one of your presets to ensure clearance.

Opretholdelse

Regular maintenance helps ensure the longevity and optimal performance of your Secretlab Magnus Evo desk.

• Rensning: Brug en blød, damp cloth to wipe down the desk surface. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Inspektion: Kontrollér regelmæssigt alle skruer og fastgørelseselementer for at sikre, at de er spændte. Spænd dem igen om nødvendigt.
• Kabelstyring: Regularly check cables for any signs of wear or damage. Ensure cables are neatly organized to prevent tangling or interference with desk movement.
• Kontrol af obstruktion: Before each height adjustment, quickly verify that there are no obstructions in the desk's path.

Fejlfinding

If you encounter issues with your Secretlab Magnus Evo desk, try the following troubleshooting steps:

• Skrivebordet bevæger sig ikke: Ensure the power cord is securely plugged into both the desk and a working wall outlet. Check if the standby switch is turned on.
• Fejlkode på displayet: Refer to the calibration/reset section and perform a full reset of the desk.
• Ujævn bevægelse: Perform a calibration/reset as described in the operating instructions.
• Usædvanlige lyde: Check for any obstructions or loose components. If the noise persists, discontinue use and contact customer support.
• Kontrolpanel reagerer ikke: Ensure the standby switch is in the 'on' position. If still unresponsive, try unplugging the desk for 30 seconds and then plugging it back in.

Specifikationer

Garanti og support

Garantioplysninger

The Secretlab Magnus Evo Electric Standing Desk comes with a Begrænset garanti. Please refer to the official Secretlab website or your purchase documentation for specific terms and conditions of the warranty.

Kundesupport

For further assistance, technical support, or warranty claims, please contact Secretlab Customer Support. Visit the Secretlab-butik på Amazon or the official Secretlab webwebsted for kontaktoplysninger.