DUMOS 26-tommer fritstående elektrisk pejsevarmer brugsanvisning

1. Vigtige sikkerhedsoplysninger

Please read all instructions carefully before using this electric fireplace heater. Failure to follow these instructions may result in fire, electric shock, or injury.

• Elektrisk sikkerhed: Sørg for, at stikkontakten matcher voltage requirements of the heater. Do not overload circuits.
• Placering: Position the heater on a firm, level surface. Maintain a minimum distance of 3 feet (0.9 meters) from combustible materials such as furniture, curtains, bedding, paper, clothes, and other objects.
• Ventilation: Do not block air vents. Ensure proper airflow around the heater.
• Overophedningsbeskyttelse: This unit is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool for 15 minutes, then plug it back in. If it continues to shut off, contact customer support.
• Børnelås: The unit includes a child lock feature to prevent accidental operation. Refer to the operating instructions for activation and deactivation.
• Fugtighed: Brug ikke varmeren i vådt eller damp steder, såsom badeværelser eller vaskerum.
• Overvågning: Close supervision is necessary when any heater is used by or near children or individuals with reduced physical, sensory, or mental capabilities.

2. Pakkens indhold

Verify that all components are present and undamaged upon opening the package. If any items are missing or damaged, contact DUMOS customer support.

• DUMOS 26-inch Freestanding Electric Fireplace Heater Unit
• Fjernbetjening
• Instruktionsmanual
• Ben (4 stk.)
• Mounting Hardware for Legs

3. Opsætning og montering

The DUMOS Electric Fireplace Heater requires minimal assembly. Follow these steps to prepare your unit for use:

1. Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere opbevaring eller transport.
2. Fastgør ben: Invert the main fireplace unit. Align each of the four legs with the designated mounting points on the bottom of the unit. Secure each leg using the provided mounting hardware (screws). Ensure all screws are tightened firmly to provide stability.
3. Placering: Place the assembled fireplace heater on a stable, level surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, curtains, or other combustible materials. Do not place it directly under a wall-mounted television or other heat-sensitive electronics.
4. Strømtilslutning: Plug the power cord into a grounded 120V AC outlet. Ensure the outlet is not shared with other high-wattage apparater.

Figur 3.1: Forside view of the DUMOS Electric Fireplace Heater after assembly.

4. Betjeningsvejledning

The DUMOS Electric Fireplace Heater can be operated using the control panel on the unit or the included remote control.

4.1 Kontrolpanel og fjernbetjeningview

Figure 4.1: Remote control and integrated control panel on the fireplace unit.

The remote control provides convenient access to all functions. Ensure the remote has working batteries (not included, typically AAA).

• Power knap: Tænder eller slukker for enheden.
• Flammeknap: Cycles through flame brightness levels.
• Timer knap: Activates and adjusts the 1-12 hour timer.
• Op/Ned knapper: Juster temperaturindstillinger eller timervarighed.
• Varmeknap: Toggles heating function ON/OFF or adjusts heat levels.

4.2 Indledende tænding

1. Ensure the unit is properly plugged into a grounded outlet.
2. Locate the master power switch, usually at the bottom or rear of the unit, and switch it to the 'ON' position.
3. Press the 'Power' button on the control panel or remote control to turn on the fireplace. The flame effect will activate.

4.3 Adjusting Flame Effect

The fireplace features a 3D flame effect with adjustable brightness levels.

1. Press the 'Flame' button on the remote or control panel.
2. Each press will cycle through different brightness settings (e.g., Off, Level 1, Level 2, Level 3, Level 4). Select your desired brightness.

Figure 4.2: Visual representation of the 5 adjustable flame brightness levels.

4.4 Setting the Heat Output

The heater provides efficient warmth with adjustable temperature settings.

1. Press the 'Heater' button on the remote or control panel to activate the heating function.
2. Use the 'Up' and 'Down' buttons to adjust the desired temperature. The temperature range is typically 59°F to 95°F.
3. The heater operates at 750W or 1500W, automatically adjusting based on the selected temperature and room conditions.

Figure 4.3: The heater provides adjustable warmth within a specified temperature range.

4.5 Brug af 12-timers timeren

The integrated timer allows for automatic shut-off, promoting energy efficiency.

1. Press the 'Timer' button on the remote or control panel.
2. Use the 'Up' and 'Down' buttons to set the desired operating duration, from 1 to 12 hours.
3. Enheden slukker automatisk, når den indstillede tid er gået.

Figure 4.4: The 12-hour timer function helps manage energy consumption.

5. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your electric fireplace heater.

• Rensning: Tag altid stikket ud af varmeapparatet før rengøring. Brug en blød, tør klud.amp klud til at tørre de udvendige overflader af. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Fjernelse af støv: Periodically vacuum or wipe dust from the air intake and exhaust vents to maintain efficient airflow.
• Opbevaring: Hvis varmeapparatet opbevares i længere tid, skal det tages ud af stikkontakten og opbevares et køligt og tørt sted, helst i originalemballagen.
• Ingen dele, der kan serviceres af brugeren: Forsøg ikke at åbne eller reparere enheden selv. Overlad al service til kvalificeret servicepersonale.

6. Fejlfinding

If you encounter issues with your DUMOS Electric Fireplace Heater, consult the following table before contacting customer support.

7. Specifikationer

8. Garanti og support

DUMOS products are manufactured to high-quality standards. For warranty information or technical assistance, please contact DUMOS customer support through the retailer where the product was purchased or visit the official DUMOS website. Please have your model number (FP203R-T3-P) and proof of purchase available when contacting support.