GEYA G2R 2P 63A AC110V Automatisk Omskifter Brugsanvisning

Indledning

This manual provides essential information for the safe and effective installation, operation, and maintenance of your GEYA G2R 2P 63A AC110V Automatic Transfer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.

Sikkerhedsoplysninger

ADVARSEL: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before working on the switch.

• Sørg for, at den nominelle voltage and current of the switch match your application.
• Følg altid lokale elektriske forskrifter og regler.
• Betjen ikke kontakten, hvis den ser ud til at være beskadiget.
• The input power supply must be connected in the correct phase sequence.

Produkt overview

The GEYA G2R Automatic Transfer Switch (ATS) is designed to ensure an uninterruptible power supply by automatically switching between a main power source and a backup power source. It features both automatic and manual operation modes and is suitable for DIN rail mounting.

Nøglefunktioner:

• Vurderet strøm: 63A
• Nominel voltage: AC 110V
• Dual Mode Operation: Automatisk og manuel
• Hurtig skift: Millisecond-level transfer time (within 50ms)
• Montering: DIN Rail and Screw Mounting System
• Materiale: High-quality PA6 material with 94V-2 flame retardant grade

Produktdimensioner:

Billede: Forside og side views of the GEYA G2R Automatic Transfer Switch with detailed dimensions in millimeters. The unit measures 108mm in height, 50.5mm in width (2P version), and 70mm in depth.

Opsætning og installation

The GEYA G2R ATS supports both DIN rail mounting and screw mounting for flexible installation. Ensure the mounting location is dry, well-ventilated, and free from excessive vibration.

Ledningsinstruktioner:

Refer to the wiring diagram below for correct connection. It is crucial that the input power supply is connected in the correct phase sequence.

Image: Detailed wiring diagram for the GEYA G2R ATS. It illustrates connections for backup power neutral wire (1), common power neutral wire (2), common power supply (3), backup power supply (4), load power (5), load output neutral wire (6), DIN-Rail buckle (7), backup power live wire (8), common power live wire (9), closing indication (10), manual operation handle (11), and load output live wire (12). A note emphasizes correct phase sequence for input power.

Voltage Valg:

Vælg den relevante voltage model for your system. This model is designed for AC 110V systems. Using an incorrect voltage can damage the control circuit.

Billede: Bindtage selection guide for GEYA G2R ATS. It shows two configurations: G2R-2P-63A-220V for 220/400V systems or one L line 220V, and G2R-2P-63A-110V for 110/220V systems or one L line 110V. A warning advises choosing the correct voltage to prevent coil damage.

Betjeningsvejledning

Driftsformer:

• Automatisk tilstand: The switch automatically detects power failures in the main source (I) and transfers the load to the backup source (II) within 50 milliseconds. When the main power is restored, it automatically switches back.
• Manuel tilstand: Use the manual operation handle to select and switch between power sources I and II.

Status for indikatorlys:

• When the power supply is under voltage eller overvoltage, the indicator light flashes (flashes every two seconds).
• When the power is cut off, the indicator light goes out.
• Green indicator light constantly on: Main power supply is active.
• Red indicator light constantly on: Backup power supply is active.

Demonstrationsvideo af operation:

Video: This video demonstrates the operation of the GEYA ATS, showing how to switch between manual and automatic modes, and how the device automatically transfers power when the main supply is interrupted or restored. It illustrates the indicator light behavior during different power states.

Opretholdelse

The GEYA G2R ATS is designed for durability with a mechanical life of ≥8000 times and an electrical life of ≥1500 times. Regular maintenance is minimal but important for optimal performance.

• Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
• Hold enheden ren og fri for støv og snavs.
• Test the automatic transfer function periodically by simulating a main power failure (if safe to do so and with appropriate precautions).

Fejlfinding

Specifikationer

Garanti og support

For garantioplysninger eller teknisk support henvises til producentens officielle webwebstedet eller kontakt dit købssted. Gem din købskvittering i tilfælde af garantikrav.

Manufacturer: GEYA

For yderligere hjælp, besøg GEYA Store on Amazon.