VSYSTO F3M Motorcykel Dash Camera Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your VSYSTO F3M Motorcycle Dash Camera. The F3M system features a 4-inch IPS display, three cameras (front, left, right), integrated GPS, and Tire Pressure Monitoring System (TPMS). It is designed to enhance driving safety and provide reliable recording capabilities for your motorcycle.

2. Produktkomponenter

The VSYSTO F3M system includes the following components:

• Main Host with Bracket
• Forreste kamera
• Venstre kamera
• Højre kamera
• GPS modul
• Strømkabel
• Kablet controller
• USB Test Cable
• Tire Pressure Sensors (2 units)

Figur 2.1: Overview of VSYSTO F3M system components.

Figur 2.2: Detaljeret view of main unit, cameras, and accessories with approximate dimensions.

3. Opsætning og installation

Proper installation is crucial for optimal performance. It is recommended to have the system installed by a qualified technician if you are unfamiliar with motorcycle electrical systems.

3.1 Ledningsdiagram

Refer to the following diagram for the correct connection of all components to your motorcycle's electrical system.

Figure 3.1: General installation layout on a motorcycle.

Figure 3.2: Electrical wiring connections for the system.

3.2 Side Camera Turn Signal Connection

For the electronic rearview mirror function, connect the yellow wires of the side cameras as follows:

• The right camera's yellow wire connects to the positive pole of the right turn signal lamp.
• The left camera's yellow wire connects to the positive pole of the left turn signal lamp.
• An additional yellow wire can be connected to the positive pole of the left/right turn light in front of the motorcycle, or to the positive pole of the left/right turn light behind the motorcycle.

When a turn signal is activated, the display screen will automatically switch to the corresponding camera view and show parking auxiliary lines.

4. Betjeningsvejledning

4.1 Tænd/sluk

The system is designed for automatic operation. After the motorcycle ignition is turned on, the recorder will automatically power on and begin recording. When the motorcycle power is turned off, the recorder will automatically shut down.

4.2 Skærm og kamera Views

The 4-inch IPS display provides a high-definition picture. The system includes a 1080P front camera and two 720P side cameras (left and right). These cameras provide a 130° wide-angle view, covering multiple lanes and reducing blind spots.

Figure 4.1: Multiple camera display options.

You can adjust the display brightness for optimal visibility in various lighting conditions.

Figure 4.2: Adjustable display brightness.

Figure 4.3: HD 1080P front camera day and night performance.

4.3 Wired Controller Functions

The wired controller provides quick access to various functions:

• Op-knap: Switch between split screen and full screen display.
• Blåt lys: Indikerer GPS-status.
• OK knap: Stop recording; Enter the menu page.
• Rødt lys: Indicates recording status.
• Ned-knap: Sluk for mikrofonen.
• Function Button (Long Press): Enter emergency recording mode; Enter auxiliary driving mode.

Figure 4.4: Wired controller button layout and functions.

4.4 Optagelsesfunktioner

The F3M dash camera includes several recording functionalities:

• Loop-optagelse: When the memory card is full, the system automatically overwrites the oldest files for at fortsætte optagelsen.
• Nødoptagelse (G-sensor): The built-in G-sensor detects sudden impacts or vibrations. When triggered, it automatically enters emergency recording mode, saving the video file for at forhindre det i at blive overskrevet.

Figure 4.5: Loop recording and G-sensor functionality.

4.5 WiFi-funktionalitet

The built-in WiFi module allows you to connect the recorder to your mobile phone via the "WiFi Camera" app. Through the app, you can:

• View real-time video feeds.
• Download and edit recorded videos directly on your phone without removing the SD card.
• View the driving track of recorded videos.

Figure 4.6: WiFi interconnection and mobile app usage.

Figure 4.7: GPS tracking via mobile app and computer software.

4.6 GPS Tracker and TPMS

The integrated GPS module allows you to record driving routes, longitude, latitude, altitude, and atmospheric pressure. You can view this data through the mobile app ("WiFi Camera") or computer software ("DV Player").

The Tire Pressure Monitoring System (TPMS) continuously checks your motorcycle's tire pressure and temperature. An alarm will sound if the tire pressure or temperature exceeds predefined thresholds.

Figure 4.8: Real-time TPMS display.

The system also includes a built-in temperature sensor for ambient temperature display.

Figure 4.9: Built-in temperature sensor display.

An overspeed warning feature can alert you if your driving speed exceeds a set limit.

Figure 4.10: Overspeed warning notification.

4.7 Auxiliary Display Mode

To access the auxiliary display mode, long-press the down button on the wired controller. This mode provides various informational interfaces, including:

• Current vehicle speed.
• Tire pressure and temperature.
• Altitude, longitude, latitude, and atmospheric pressure.
• Short-term memory driving speed and mileage.
• Motorcykel batteri voltage.
• Tid og dato.

Figure 4.11: Auxiliary display mode interfaces.

4.8 Parkeringsovervågning

When enabled, the parking monitoring feature automatically activates and records for 30 seconds if the recorder detects vibration after the motorcycle power is turned off. This function requires a battery voltage of at least 11.8V and is not effective with USB power supply or electric vehicle installations.

Figure 4.12: Parking monitoring activation.

4.9 License Plate Watermark

You can add a custom license plate watermark to your recorded videos. This feature supports English letters and numbers only. Special characters are not supported. A specific TXT document upgrade may be required to enable this feature. Contact VSYSTO support for the necessary TXT files.

Figure 4.13: Custom license plate watermark example.

4.10 Type-C-grænseflade

The host unit features a Type-C interface for convenient data transfer and power supply. You can directly connect the recorder to a computer using a Type-C cable to transfer video files without removing the SD card. It can also be powered directly by a 5V 2A power bank or charger. Note: Input voltage exceeding 5V may damage the recorder.

Figure 4.14: Type-C interface for data transfer and power.

5. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the display and camera lenses. Avoid abrasive cleaners or solvents.
• SD-kortadministration: Regularly format the microSD card to maintain optimal recording performance and prevent data corruption. Back up important files før formatering.
• Firmwareopdateringer: Check the VSYSTO official webbesøg webstedet regelmæssigt for firmwareopdateringer for at sikre, at din enhed har de nyeste funktioner og fejlrettelser.
• Vandtætning: The main unit, cameras, GPS, and wired controller are designed to be waterproof. However, ensure all connections are secure and covers are properly sealed after any maintenance.

6. Fejlfinding

• Enheden tænder ikke: Ensure the power cable is correctly connected and receiving 12V power from the motorcycle's ignition. If using USB, ensure the power source provides 5V 2A.
• Recording Issues (Flickering/Stopping): Verify the power supply is stable. Some users have reported issues with 5V USB power; a direct 12V connection is recommended for consistent performance. Ensure the microSD card is a Class 10 or higher and is formatted regularly.
• Camera Image Blurry/Not Working: Check camera connections. Ensure lenses are clean and free from obstructions. If a camera consistently malfunctions, contact support.
• Problemer med WiFi-forbindelse: Ensure the WiFi module is enabled. Restart the device and your mobile phone. Reinstall the "WiFi Camera" app if necessary.
• GPS sporer ikke: Ensure the GPS module is properly installed and has a clear view of the sky. Check the blue light on the wired controller for GPS status.
• Interference (Audio/Video): Some electrical interference from the motorcycle (e.g., horn, high RPMs) may affect audio or video quality. If audio interference is significant, consider turning off sound recording.
• Parking Monitoring Not Activating: Ensure the motorcycle battery voltage is above 11.8V. This feature does not work with USB power or certain electric vehicle setups.

If you encounter persistent issues not resolved by these steps, please contact VSYSTO customer support.

7. Specifikationer

Figure 7.1: Summary of product features.

8. Garanti og support

For warranty information and technical support, please contact VSYSTO customer service. Refer to your product packaging or the official VSYSTO webhjemmeside for de seneste kontaktoplysninger.