1. Introduktion
Thank you for choosing the Kismile HZB-12M Crescent-Shaped Countertop Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.
2. Vigtige sikkerhedsinstruktioner
ADVARSEL: For at mindske risikoen for brand, elektrisk stød eller personskade skal du altid følge grundlæggende sikkerhedsforanstaltninger.
- Ensure the ice maker is connected to a properly grounded power outlet.
- Apparatet, netledningen eller stikket må ikke nedsænkes i vand eller andre væsker.
- Unplug the ice maker before cleaning, servicing, or when not in use.
- Keep children away from the ice maker. Close supervision is necessary when used near children.
- Do not operate the appliance with a damaged cord or plug, or if it malfunctions or is damaged.
- Place the ice maker on a stable, level surface, away from direct sunlight, heat sources, and corrosive gases.
- Allow at least 6 inches of clearance around the appliance for proper ventilation.
- Brug kun drikkevand i vandtanken.
- Opbevar ikke eksplosive stoffer såsom spraydåser med et brændbart drivmiddel i dette apparat.
3. Produktet er slutview
The Kismile HZB-12M is a compact countertop ice maker designed for convenience and efficiency. It produces unique crescent-shaped ice cubes and features a self-cleaning function and an intuitive LED display.
Nøglefunktioner:
- Crescent-Shaped Ice: Produces ice that cools beverages quickly and melts slowly.
- Høj output: Generates 16 ice cubes per cycle in 10-15 minutes, with a daily capacity of 26.5 lbs (12KG/24H).
- Selvrensende funktion: One-touch automatic cleaning mode for hygiene.
- Smart LED-skærm: Intuitive controls with a 24-hour programmable timer.
- Bærbart design: Space-saving with a removable transparent water tank (1.8L capacity) and ice basket (2 lbs capacity).
Komponenter:
- Control Panel (LED Display)
- Isfremstillingsområde
- Aftagelig vandtank
- Iskurv
- Is Scoop
- Drain Plug (located at the bottom)
Figure 3.1: Kismile HZB-12M Ice Maker with ice bucket and various applications.
Figur 3.2: Detaljeret view of the Kismile HZB-12M Ice Maker showing the water tank and ice basket.
4. Opsætning
- Udpakning: Carefully remove all packaging materials and check for any damage. Keep packaging for future storage or transport.
- Placering: Place the ice maker on a firm, level surface. Ensure there is adequate ventilation (at least 6 inches) around the unit. Avoid placing it near heat sources or in direct sunlight.
- Stabilisering: After placing the unit, allow it to stand upright for at least 2-4 hours before plugging it in. This allows the refrigerant to settle.
- Indledende rengøring: Rengør ismaskinens indre inden første brug. Se afsnittet 'Vedligeholdelse' for detaljerede rengøringsinstruktioner.
- Strømtilslutning: Sæt netledningen i en jordet stikkontakt.
5. Betjeningsvejledning
5.1 Påfyldning af vandtanken
- Åbn det øverste låg på ismaskinen.
- Fjern iskurven.
- Pull out the transparent water tank.
- Fill the water tank with potable water up to the 'MAX' fill line (approximately 1.8 liters).
- Carefully slide the water tank back into place, ensuring it clicks securely.
- Udskift iskurven og luk toplåget.
Figure 5.1: Illustration of refilling the pull-out water tank.
5.2 Opstart af isproduktion
- Tryk på Power knap (⏻) on the control panel to turn on the ice maker.
- The ice maker will automatically begin the ice-making cycle. The LED display will show the remaining time for the current cycle.
- The first batch of ice may take slightly longer and might be smaller due to the initial cooling process. Subsequent batches will be produced more quickly.
5.3 Justering af istykkelse
The ice maker allows you to adjust the thickness of the ice cubes. This feature is typically controlled by pressing and holding a specific button (often the power button or a dedicated 'thickness' button) until the display flashes, then using '+' or '-' buttons to select the desired thickness level (e.g., 1 to 5, where 5 is thicker).
5.4 LED-displayindikatorer
- Is fuld indikator: An icon will illuminate when the ice basket is full, and the ice making process will pause. Remove ice to resume operation.
- Tilføj vand-indikator: An icon will illuminate when the water level in the tank is low. Add water to the tank to resume ice production.
- Timer: The display may show a countdown for the current ice-making cycle or a programmed timer.
6. Vedligeholdelse
Regular cleaning and maintenance are crucial for the longevity and optimal performance of your ice maker.
6.1 Selvrensende funktion
The Kismile HZB-12M features a one-touch self-cleaning function:
- Sørg for, at ismaskinen er tømt for is og vand.
- Fyld vandtanken med rent vand.
- Tryk og hold på Rens knap (refer to your control panel for the specific icon, often a brush or water droplet symbol) for approximately 3-5 seconds to activate the 20-minute self-cleaning cycle.
- Once the cycle is complete, drain the water from the unit using the drain plug at the bottom.
Figure 6.1: Visual representation of the self-cleaning function in action.
6.2 Manuel rengøring
- Dagligt/Ugentlig: Remove the ice basket and water tank. Wash them with mild detergent and warm water, then rinse thoroughly.
- Indre: Tør de indvendige overflader af med en blød kludampened with a mild cleaning solution. Ensure all areas are dry before reassembling.
- Afkalkning: It is recommended to descale the unit twice a week to prevent mineral buildup, especially in hard water areas. Use a descaling solution suitable for ice makers or a mixture of water and vinegar. Follow the product instructions for the descaling agent.
- Ydre: Tør ydersiden af med en blød, damp klæde.
6.3 Aftapning af vand
To drain residual water from the unit, locate the drain plug at the bottom of the ice maker. Place a container underneath, remove the plug, and allow all water to drain. Replace the plug securely afterward.
7. Fejlfinding
Hvis du støder på problemer med din ismaskine, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ismaskine virker ikke | No power; Water tank not properly seated; Ice basket full. | Check power connection; Ensure water tank clicks into place; Empty ice basket. |
| Indikatoren 'Tilsæt vand' er tændt | Vandstanden er lav. | Fyld vandtanken med drikkevand. |
| Ice cubes are small or soft | Room temperature too high; Water temperature too high; Ice thickness setting too low. | Ensure proper ventilation; Use colder water; Adjust ice thickness setting to a higher level. |
| Usædvanlig støj under drift | Normale driftslyde (kompressor, vandpumpe); Enheden er ikke i vater. | Ensure the unit is on a stable, level surface. If noise is excessive or unusual, contact support. |
| Ice has an odd taste | Enheden trænger til rengøring; gammelt vand. | Perform self-cleaning cycle; Clean water tank and interior; Use fresh, potable water. |
If the problem persists after attempting these solutions, please contact Kismile customer support.
8. Specifikationer
- Modelnavn: HZB-12M
- Mærke: Kismile
- Produktdimensioner: 14.09" D x 9.45" B x 15.75" H
- Vægt: Cirka 25 pund
- Vandtankkapacitet: 1.8 liter
- Iskurvs kapacitet: 2 lbs
- Daglig isproduktion: 26.5 lbs (12KG/24H)
- Isproduktionscyklus: 10-15 minutter pr. portion (16 terninger)
- Kølemiddel: R600a
- Fabrikant: Kismile
Figure 8.1: Dimensions and capacities of the Kismile HZB-12M Ice Maker.
9. Garanti og support
Your Kismile HZB-12M Ice Maker is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including the warranty period and coverage details.
For technical support, troubleshooting assistance, or warranty claims, please contact Kismile customer service through the retailer where the product was purchased or visit the official Kismile webwebsted for kontaktoplysninger.
