INKBIRD Kødtermometer med øjeblikkelig aflæsning IHT-21K Brugermanual

Indledning

This manual provides detailed instructions for the safe and effective use of your INKBIRD IHT-21K Instant Read Meat Thermometer. Please read this manual thoroughly before operation and retain it for future reference.

Produkt overview

Nøglefunktioner

• 0.5s Ultra Fast Reading and ±0.3℃ Super High Accuracy: Equipped with a K sensor for higher stability, accuracy, and efficiency in temperature measurement. Reads temperatures in just 0.5 seconds with an accuracy of ±0.3℃/±0.5℉.
• Bredt anvendelsesområde: Temperature measurement range of -58.0℉ to 572℉ (-50.0℃ to 300℃), suitable for pan frying, deep frying, baking, home brewing, and beverages.
• IP65 Waterproof, Washable Body: Dustproof, waterproof, and oil-resistant. Can be washed directly under running water.
• Clear VA LCD with 2 Strong Magnets: One key locks the temperature reading. Premium VA LCD (1.57*0.78inch/40*20MM) for visibility even in sunlight. Two strong magnets on the back for convenient attachment to refrigerators.
• Temperature Unit Selection and Calibration: Switch between Celsius and Fahrenheit. Temperature calibration function ensures accurate readings.

Pakkens indhold

• Instant-Read Meat Thermometer x 1
• Ladekabel x 1
• Brugervejledning x 1

Opsætning

Opladning af enheden

The INKBIRD IHT-21K thermometer is powered by a 500mAh rechargeable battery. Before first use, fully charge the device.

1. Locate the Type-C charging port on the thermometer.
2. Connect the provided charging cable to the thermometer and a suitable USB power source.
3. The battery indicator on the display will show charging status. A full charge typically takes approximately 1 hour.

Image: The thermometer connected to a charging cable, illustrating the Type-C port and battery indicator.

Initial Power On and Probe Deployment

1. To power on the thermometer, gently unfold the probe. The device will automatically turn on.
2. The display will illuminate, showing the current temperature.
3. To turn off, fold the probe back into the housing. The device features an auto-off function after 3 minutes in a locked state or 1 minute in an unlocked state to conserve battery.

Image: The thermometer with its probe extended, displaying a temperature reading, highlighting its fast response time.

Betjeningsvejledning

Tager en temperaturaflæsning

1. Unfold the probe to power on the device.
2. Stik sonden i rustfrit stål ind i den tykkeste del af maden, og undgå ben eller brusk.
3. Wait for approximately 0.5 seconds for the temperature reading to stabilize on the VA LCD screen.
4. The large VA LCD screen ensures clear visibility of the temperature, even in bright sunlight.

Image: The thermometer placed on a grill next to cooking meat, showing a clear temperature reading on its VA LCD screen.

Låsfunktion

To hold the current temperature reading on the display after withdrawing the probe from the food:

1. Press the "HOLD" button once. The reading will be locked on the screen.
2. Press the "HOLD" button again to unlock and resume live temperature measurement.

Switching Temperature Units (℃/℉)

To switch between Celsius (℃) and Fahrenheit (℉):

1. Locate the ℃/℉ button on the device.
2. Press the button to toggle between the two temperature units.

Image: The thermometer displaying temperature, with icons indicating Fahrenheit/Celsius switching and calibration features.

Temperaturkalibrering

The thermometer features a calibration function to ensure accuracy. If you suspect the readings are inaccurate, you can calibrate the device:

1. Prepare a cup of ice water (a mixture of crushed ice and water). The temperature should be 0℃ (32℉).
2. Insert the probe into the ice water.
3. Refer to the user manual for specific button combinations or menu options to enter calibration mode. (Note: Specific calibration steps are often detailed in the printed manual or on the device itself, as they can vary.)
4. Adjust the reading to 0℃ (32℉) if necessary.

Opretholdelse

Rensning

The INKBIRD IHT-21K is IP65 waterproof, making it easy to clean:

1. After each use, fold the probe back into the thermometer.
2. Rinse the entire thermometer under running water.
3. Wipe it dry with a clean cloth.
4. Do not immerse the thermometer in water for extended periods or clean it in a dishwasher.

Image: A hand holding the thermometer under running water, illustrating its IP65 waterproof capability.

Opbevaring

For convenient storage, the thermometer features two strong magnets on its back:

1. Attach the thermometer to metal surfaces such as a refrigerator door or oven side.
2. Ensure the storage location is clean and dry.
3. Avoid attaching the thermometer to the exterior of an oven during operation, as temperatures exceeding 80℃ (176℉) may damage the unit.

Image: The thermometer shown magnetically attached to a refrigerator, demonstrating its built-in magnets for easy storage.

Fejlfinding

Specifikationer

Garanti & Support

For technical support, warranty information, or any inquiries regarding your INKBIRD IHT-21K thermometer, please contact INKBIRD customer service.

• E-mail: support@ink-bird.com
• Webwebsted: https://www.ink-bird.com/

INKBIRD typically offers a two-year warranty on its products. Please refer to your purchase documentation or the official INKBIRD webwebstedet for de seneste garantivilkår.