ESKUTE M200 Electric Mountain Bike User Manual

1. Sikkerhedsoplysninger

Read this manual thoroughly before operating your ESKUTE M200 Electric Mountain Bike. Failure to follow instructions and safety guidelines may result in serious injury or damage to the product.

• Brug altid hjelm og passende sikkerhedsudstyr, når du kører.
• Sørg for, at alle komponenter er forsvarligt fastgjort før hver tur.
• Familiarize yourself with local electric bike regulations and traffic laws.
• Rid ikke under påvirkning af alkohol eller stoffer.
• Kontroller regelmæssigt bremser, dæk og batteri for korrekt funktion.
• The bike features dual suspension and 27.5" x 2.1" tires for stable handling, but always exercise caution on rough terrain.
• Use the bright front headlight and rear reflector for visibility, especially during low-light conditions.

2. Produktet er slutview

The ESKUTE M200 Electric Mountain Bike is designed for adults, offering a blend of power and versatility for both urban commuting and off-road adventures. Key features include:

• Motor: 1200W Peak Brushless Motor, providing speeds up to 28 MPH.
• Batteri: Removable 48V 13Ah UL-certified lithium battery, offering up to 65 miles range (PAS 1).
• Gear: 21-Speed Shimano Gear System for precise shifting.
• Ridemåder: Manual, Pedal-Assist, Throttle-only, and Walk Mode.
• Sikkerhedsfunktioner: Dual suspension, 27.5" x 2.1" tires, bright headlight, rear reflector, and NFC card unlock.

Figure 2.1: ESKUTE M200 Electric Mountain Bike (Purple variant shown).

3. Opsætning og montering

Your ESKUTE M200 bike arrives approximately 90% pre-assembled. Follow these steps for final assembly. Tools are included with your purchase.

3.1 Udpakning og komponentidentifikation

Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present before proceeding.

3.2 Installation af styr

1. Løsn boltene på styrfrempinden med den medfølgende unbrakonøgle.
2. Insert the handlebar into the stem, ensuring it is centered and aligned.
3. Spænd frempindsboltene forsvarligt.

3.3 Front Wheel Attachment

1. Remove the protective cap from the front fork.
2. Align the front wheel with the fork dropouts, ensuring the brake rotor slides correctly into the brake caliper.
3. Insert the axle bolt and tighten the nuts on both sides using the wrench.

3.4 Montering af forlygte

1. Attach the headlight bracket to the designated mounting point on the front fork.
2. Secure the headlight to the bracket and connect the power cable.

3.5 Montering af støtteben

1. Attach the kickstand to the mounting plate near the rear wheel.
2. Securely tighten the bolts.

3.6 Justering af sadelpind

1. Sæt sadelpinden ind i stellets sadelrør.
2. Juster sædehøjden til en behagelig kørestilling, og sørg for, at dine fødder kan røre jorden, når du holder stille.
3. Secure the quick-release lever or bolt.

3.7 Pedalinstallation

1. Identify the "L" (left) and "R" (right) pedals.
2. Thread the "L" pedal counter-clockwise into the left crank arm.
3. Thread the "R" pedal clockwise into the right crank arm.
4. Tighten both pedals securely with a wrench.

3.8 Batteriinstallation og opladning

1. Insert the removable battery into its housing on the bike frame.
2. Lock the battery using the provided key for security.
3. Connect the charger to the battery charging port and a power outlet. The indicator light on the charger will show charging status (typically red for charging, green for fully charged).
4. En fuld opladning tager cirka 4 timer.

Figure 3.1: Removable 48V 13Ah UL-certified lithium battery.

4. Betjeningsvejledning

The ESKUTE M200 offers multiple riding modes and smart features for a customized experience.

4.1 Tænd/sluk og display

1. To power on the bike, press and hold the power button on the handlebar display.
2. The LCD display will show speed, battery level, mileage, and current assist mode.
3. For at slukke skal du trykke på og holde tænd/sluk-knappen nede igen.

4.2 Køretilstande

Select your preferred riding mode using the controls on the handlebar:

• Manuel tilstand: Kør som en traditionel cykel uden motorassistance.
• Pedalhjælpstilstand (PAS): The motor provides assistance as you pedal. Adjust the assist level (typically 1-5) using the '+' and '-' buttons on the display. Higher levels provide more power.
• Kun gashåndtag: Giv gas for motorkraft uden at træde i pedalerne.
• Gangtilstand: Provides low-speed assistance for walking the bike, useful when pushing it uphill.

Figure 4.1: Illustration of the 1200W peak brushless motor.

4.3 Gearskift

The 21-speed Shimano gear system allows you to adapt to various terrains. Use the gear shifters on the handlebars to change gears smoothly. Shift to lower gears for climbing hills and higher gears for flat terrain or descents.

Figure 4.2: The 21-speed Shimano gear system for versatile riding.

4.4 NFC Unlock System

The ESKUTE M200 features an NFC card unlock system for keyless operation. Simply tap the NFC card to the designated area on the display to unlock and activate the bike.

Figure 4.3: Using the NFC card for smart access and unlocking.

5. Vedligeholdelse

Regular maintenance ensures the longevity and safe operation of your ESKUTE M200 Electric Mountain Bike.

5.1 Generel pleje

• Hold cyklen ren. Tør stellet og komponenterne af med enamp klud. Undgå højtryksspuling direkte på elektriske komponenter.
• Smør kæden regelmæssigt for at sikre problemfri drift og forhindre rust.
• Kontroller dæktrykket før hver tur. Det anbefalede dæktryk er normalt angivet på dækkets sidevæg.
• Undersøg bremseklodserne for slid, og udskift dem, når det er nødvendigt.
• Ensure all bolts and fasteners are tight, especially on the handlebars, seat post, and wheels.

5.2 Pleje af batterier

• Charge the battery fully after each ride, or at least once a month if not in use, to maintain battery health.
• Opbevar batteriet et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Undgå at aflade batteriet helt, da dette kan reducere dets levetid.
• The battery is waterproof (IP54 level), but avoid submerging it in water.

6. Fejlfinding

Dette afsnit indeholder generel vejledning til almindelige problemer. Ved mere komplekse problemer bedes du kontakte kundesupport.

• Cyklen tænder ikke: Kontroller, om batteriet er korrekt installeret og opladet. Sørg for, at tænd/sluk-knappen på displayet er trykket korrekt ned.
• Motor hjælper ikke: Verify that Pedal-Assist mode is activated and the assist level is not set to zero. Check battery charge.
• Brakes squealing or not effective: Inspect brake pads for wear. Ensure brake calipers are properly aligned and cables are tensioned correctly.
• Gearskiftet går ikke jævnt: The Shimano gear system may require adjustment. Consult a bike mechanic or refer to detailed gear adjustment guides.
• NFC unlock not working: Ensure the NFC card is correctly placed over the sensor. Check for any obstructions or damage to the card or sensor.

7. Specifikationer

Figure 7.1: ESKUTE M200 Size Chart and recommended rider dimensions.

8. Garantioplysninger

The ESKUTE M200 Electric Mountain Bike comes with a 12 måneders garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl i materialer og udførelse. Gem venligst din købsbevis i tilfælde af garantikrav.

Garantien dækker ikke:

• Almindelig slitage.
• Damage caused by improper assembly or maintenance.
• Damage due to accidents, misuse, neglect, or unauthorized modifications.
• Consumable parts such as tires, brake pads, and chains (unless defective at the time of purchase).

For detailed warranty terms and conditions, please refer to the official ESKUTE webwebsted eller kontakt kundesupport.

9. Kundesupport

For any questions, technical assistance, or warranty claims, please contact ESKUTE customer support:

• E-mail: support.us@eskute.com
• Pre-sales telefon: 1-888-886-2818
• Eftersalgs telefon: 1-240-332-0549
• Driftstider: Mandag - fredag, 9:00 - 6:00 EST

You can also visit the official ESKUTE store for more information and resources: ESKUTE Store on Amazon