Xiaomi Truclean W30 Pro våd-tør støvsuger brugsanvisning

1. Introduktion

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Xiaomi Truclean W30 Pro Wet Dry Vacuum. Please read this manual thoroughly before first use and retain it for future reference.

2. Vigtige sikkerhedsoplysninger

Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elektriske apparater, for at mindske risikoen for brand, elektrisk stød eller personskade.

• Do not operate the vacuum with a damaged cord or plug.
• Do not use the vacuum to pick up flammable or combustible liquids, or anything that is burning or smoking.
• Hold hår, løstsiddende tøj, fingre og alle dele af kroppen væk fra åbninger og bevægelige dele.
• Brug kun som beskrevet i denne manual. Brug kun producentens anbefalede tilbehør.
• Tag stikket ud af stikkontakten, når den ikke er i brug, og før servicering.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.

3. Produktet er slutview

Familiarize yourself with the components of your Xiaomi Truclean W30 Pro Wet Dry Vacuum.

Figur 1: Main unit of the Xiaomi Truclean W30 Pro Wet Dry Vacuum. This image displays the complete vacuum cleaner, highlighting its sleek white design, handle with control buttons, main body housing the water tanks, and the floor head with the roller brush.

Komponenter:

• Hovedstøvsugerenhed: The primary body of the vacuum.
• Håndtag: Ergonomic handle with integrated control buttons.
• Rent vandtank: Holds fresh water for wet cleaning.
• Beholder til snavset vand: Opsamler snavset vand og snavs.
• Rullebørste: The rotating brush for scrubbing and picking up debris.
• Rengøringsbase: For charging and self-cleaning the roller brush.
• Rengøringsbørste: For manual cleaning of components.

4. Opsætning

4.1 Montering

1. Pak alle komponenter ud af emballagen.
2. Insert the handle into the main vacuum unit until it clicks securely into place.
3. Sørg for, at både rentvandstanken og beskidtvandstanken er installeret korrekt.

4.2 Opladning

1. Place the vacuum onto the cleaning base.
2. Connect the power adapter to the cleaning base and plug it into a power outlet.
3. The indicator lights on the handle will show the charging status. Fully charge the vacuum before first use (approximately 4 hours).

5. Betjeningsvejledning

5.1 Fyldning af rentvandstanken

• Fjern rentvandstanken fra hovedenheden.
• Open the tank cap and fill with clean tap water. For enhanced cleaning, a small amount of non-foaming, compatible cleaning solution can be added (refer to solution manufacturer's instructions). Do not overfill.
• Close the cap securely and reinsert the tank into the vacuum.

5.2 Powering On and Selecting Mode

• Press the Power button on the handle to turn on the vacuum.
• The vacuum will typically start in a standard cleaning mode. Use the Mode button (if available) to switch between different cleaning modes (e.g., standard, max, dry-only).

5.3 Rengøring

• Tilt the vacuum back to engage the roller brush and begin cleaning.
• Move the vacuum slowly over the floor surface to allow the roller brush to scrub and the suction to pick up debris and dirty water.
• For stubborn stains, hold the vacuum over the area for a few seconds.
• The 180-degree lie-flat capability allows cleaning under furniture.

5.4 Sluk

• Press the Power button again to turn off the vacuum.
• Return the vacuum to the cleaning base for charging and self-cleaning.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum.

6.1 Tømning og rengøring af beskidtvandsbeholderen

• Fjern beskidtvandsbeholderen efter hver brug.
• Carefully open the tank and dispose of the dirty water and debris.
• Skyl tanken grundigt med rent vand.
• Lad tanken lufttørre helt, før den sættes i igen.

6.2 Selvrensende funktion

• Place the vacuum on the cleaning base after use.
• Sørg for, at der er tilstrækkeligt vand i renvandstanken.
• Press the Self-Clean button (if available) or follow the instructions on the display to initiate the self-cleaning cycle. The high-temperature self-cleaning feature will clean and dry the roller brush.
• Tøm beskidtvandstanken, når selvrensningscyklussen er afsluttet.

6.3 Cleaning the Roller Brush (Manual)

• If the self-cleaning function is insufficient or for deeper cleaning, remove the roller brush cover and then the roller brush.
• Use the provided cleaning brush to remove any tangled hair or debris from the roller brush.
• Skyl rullebørsten under rindende vand.
• Allow the roller brush to air dry completely before reinstallation.

7. Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

8. Specifikationer

9. Garanti og support

For garantioplysninger henvises til garantikortet, der følger med dit produkt, eller besøg den officielle XIAOMI-side. website. For technical support or service inquiries, please contact XIAOMI customer service through their official channels.

Gem din købskvittering som købsbevis i tilfælde af garantikrav.