Lefant M3 Max robotstøvsuger og moppe brugermanual

1. Introduktion

Thank you for choosing the Lefant M3 Max Robot Vacuum and Mop. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.

Image: The Lefant M3 Max robot vacuum and its accompanying self-cleaning station, shown with additional mop pads and dust bags.

2. Produktet er slutview

2.1 Komponenter

Image: An illustration detailing the contents of the Lefant M3 Max package, including the robot, self-cleaning station, power cord, dust bags, side brushes, mop holders, washable mop cloths, HEPA filter, cleaning tool, cleaning liquid, and user manual.

Pakken indeholder følgende varer:

• Lefant M3 Max Robot Vacuum and Mop
• Selvrensende station
• Strømledning
• Støvposer (x2)
• Sidebørster (x2)
• Moppeholdere (x2)
• Washable Mop Cloths (x4)
• HEPA-filter (x2)
• Rengøringsværktøj
• Rengøringsvæske
• Brugermanual

2.2 Nøglefunktioner

• Avanceret navigation: dToF 360° Laser Navigation for precise mapping and efficient path planning.
• Undgåelse af forhindringer: PSD 190° obstacle detection and Freemove 3.0 sensor network for comprehensive protection.
• Kraftig sugning: 20,000 Pa hyper suction for deep cleaning on various surfaces.
• Dobbelt roterende mopper: 200 RPM high-speed rotating mops with 9mm auto-lift function for effective stain removal and carpet protection.
• All-in-One Self-Cleaning Station: Features 45°C hot water sterilization, 2-hour air drying, and a 3.5L automatic dust collection system.
• Anti-filtringsbørste: V-shaped brush with double comb design to prevent hair entanglement.
• Smart kontrol: Multi-level mapping, customizable cleaning zones, no-go zones, scheduled cleaning via the Lefant app, and voice control compatibility (Alexa, Google Assistant).
• Udvidet kørselstid: 220 minutes of cleaning on a single charge, covering up to 220 m².

3. Opsætning

3.1 Udpakning og placering

1. Fjern forsigtigt alle komponenter fra emballagen.
2. Place the self-cleaning station on a hard, flat surface against a wall. Ensure there is at least 0.5 meters of clear space on both sides and 1.5 meters in front of the station for optimal robot navigation.
3. Connect the power cord to the self-cleaning station and plug it into a power outlet.

3.2 Indledende opladning

Place the Lefant M3 Max robot onto the charging contacts of the self-cleaning station. The robot will automatically begin charging. Ensure the robot is fully charged before its first use.

3.3 App-forbindelse

Image: A visual guide illustrating the process of connecting the Lefant M3 Max robot to the dedicated mobile application, showing screenshots of each step.

1. Download Lefant app fra din mobilenheds appbutik.
2. Open the app and add your M3 Max robot.
3. Ensure your mobile device is connected to a 2.4 GHz or 5 GHz Wi-Fi network.
4. Power on the robot by pressing its main button.
5. Press and hold the robot's start button for 6 seconds until it enters pairing mode.
6. Follow the in-app instructions to select the M3 Max and complete the pairing process.

3.4 Voice Assistant Connection (Alexa/Google Assistant)

Image: A visual guide demonstrating the steps to link the Lefant M3 Max robot with Amazon Alexa for voice control.

1. Open the Lefant app, navigate to 'Mine' and then 'Voice' to access the service.
2. Registrer din stemmekonto og adgangskode.
3. Open the Alexa app (or Google Home app), go to 'Plus' (or 'Add device') and then 'Skills & Games' (or 'Works with Google').
4. Søg efter "Smart liv".
5. Click on "Enable to Use" (or "Link account").
6. Vælg din region, og indtast stemmekontoen og adgangskoden fra trin 2.
7. Vent på bekræftelse af vellykket forbindelse.

4. Betjeningsvejledning

4.1 Start og stop af rengøring

• Via app: Open the Lefant app and select the desired cleaning mode or start/stop function.
• Via robotknap: Press the main button on the robot to start or pause cleaning.
• Via stemmestyring: Use compatible voice assistants (Alexa, Google Assistant) with commands like "Alexa, ask Lefant Robot to clean."

4.2 Rengøringstilstande og tilpasning

Image: The Lefant mobile application interface displaying options for planning cleaning, customized routines, no-go zones, intelligent mapping, targeted zone cleaning, water flow adjustment, and tap-to-clean anywhere.

• Auto rengøring: Robotten rengør intelligent hele det kortlagte område.
• Zone rengøring: Vælg specifikke områder på kortet til målrettet rengøring.
• Rengøring af pletter: Instruer robotten til at rengøre et specifikt lille område med koncentreret indsats.
• Planlagt rengøring: Indstil specifikke tidspunkter for robottens automatiske rengøring.
• No-Go zoner: Define areas on the map that the robot should avoid.
• Vandstrømsjustering: Adjust the water output for mopping via the app.
• Forstyr ikke-tilstand: Set quiet hours during which the robot will not clean or send notifications.

4.3 Navigation og kortlægning

Image: The Lefant M3 Max robot vacuum navigating a living room, illustrating its LIDAR mapping capabilities and obstacle avoidance for comprehensive cleaning.

• The M3 Max uses dToF 360° laser navigation to create accurate maps of your home, even in low light conditions.
• PSD 190° sensors enable the robot to detect and avoid obstacles, protecting furniture and objects.
• The robot supports multi-level mapping, allowing it to store maps for up to 3 different floors.

4.4 Mop and Suction Control

Billede: Nærbillede view of the Lefant M3 Max's dual rotating mop pads, highlighting their 200 RPM speed and 9mm lift capability for thorough floor cleaning.

• The robot automatically detects carpets and lifts its mop pads by 9mm to prevent wetting and ensure optimal vacuuming.
• Suction power is automatically adjusted based on the floor type. You can also manually select suction levels (Standard, Max) via the app.
• The dual rotating mops operate at 200 RPM to effectively scrub and remove stubborn stains from hard floors.

5. Vedligeholdelse

5.1 Self-Cleaning Station Maintenance

Image: The Lefant M3 Max self-cleaning station with its removable tray being detached and cleaned under running water, demonstrating ease of maintenance.

• Automatisk moppevask: The station automatically washes the mop pads with 45°C hot water to sterilize and clean them.
• Automatisk moppetørring: After washing, the mops are air-dried for 2 hours to prevent odors and maintain their integrity.
• Automatisk støvopsamling: The robot automatically empties its dustbin into the station's 3.5L dust bag, which typically requires replacement every 8 weeks.
• Aftagelig bakke: The base tray of the self-cleaning station is removable for easy manual cleaning.

5.2 Robotvedligeholdelse

• V-Brush and Side Brushes: Regularly check and clean the V-shaped main brush and side brushes for tangled hair or debris. The anti-tangle design minimizes this, but periodic inspection is recommended.
• HEPA-filter: Clean the HEPA filter regularly by tapping out dust. Replace the filter every 3-6 months, depending on usage.
• Moppeklude: Wash the reusable mop cloths after each mopping session.
• Sensorer: Wipe the LIDAR sensor, PSD sensors, and cliff sensors with a clean, dry cloth to ensure optimal navigation and obstacle detection.

6. Fejlfinding

If you encounter issues with your Lefant M3 Max, please refer to the following common solutions:

7. Specifikationer

8. Garanti og support

Lefant is committed to providing quality products and responsive customer service. For any warranty claims, technical assistance, or product-related inquiries, please contact Lefant customer support through the following channels:

• Se kontaktoplysningerne på den originale produktemballage.
• Visit the official Lefant webwebsted for supportressourcer og kontaktoplysninger.
• Utilize the support features within the Lefant mobile application.

Gem venligst din købsbevis for at validere garantien.