Baseus Bass BS1 NC Semi-in-Ear Ægte Trådløse Støjreducerende Ørepropper Brugermanual

Indledning

Thank you for choosing the Baseus Bass BS1 NC Semi-in-Ear True Wireless Noise Cancelling Earbuds. This manual provides essential information for setting up, operating, and maintaining your new earbuds to ensure optimal performance and longevity. Please read this guide thoroughly before use.

Hvad er der i æsken

• Baseus Bass BS1 NC Semi-in-Ear Earbuds
• Opladningsetui
• USB-A til USB-C ladekabel
• Hurtig startvejledning

Produkt overview

The Baseus Bass BS1 NC earbuds are designed for a comfortable audio experience with advanced features.

Nøglefunktioner:

• Adaptive Hybrid ANC: Intelligent noise cancellation that adjusts to your environment for a natural, pressure-free fit.
• Hi-Res Audio Certified with LDAC: Supports LDAC codec for high-resolution audio transmission, delivering lossless-quality sound through 13mm dynamic drivers and SuperBass 2.0 technology.
• 4g Ultra-Lightweight & Semi-In-Ear Design: Ergonomic design with soft skin-fit material for extended comfort.
• Forlænget spilletid: Up to 7 hours per charge (ANC off) and 40 hours with the compact charging case. Fast charging provides 2 hours of playback from a 10-minute charge.
• 6-mikrofon AI klare opkald: Environmental Noise Cancellation (ENC) with AI voice isolation and wind-noise blocking for clear conversations.
• IP55 Vandafvisende: Built to withstand sweat, rain, and dust, suitable for workouts and outdoor use.

Opsætning

1. Opladning af øretelefoner og etuiet

1. Placer ørepropperne i opladningsetuiet. Sørg for, at de er korrekt isat.
2. Connect the charging case to a power source using the provided USB-A to USB-C charging cable.
3. The LED indicator on the case will show charging status. A green light indicates a charge level between 75% and 100%.
4. Allow sufficient time for a full charge before first use. A 10-minute charge provides approximately 2 hours of playback.

2. Parring med en enhed

1. Åbn opladningsetuiet. Ørepropperne går automatisk i parringstilstand.
2. Aktiver Bluetooth på din enhed (smartphone, tablet, bærbar computer).
3. Søg efter available Bluetooth devices and select "Baseus Bass BS1 NC" from the list.
4. Once connected, you will hear an audible confirmation. The earbuds are now ready for use.

Betjeningsvejledning

Tænd/sluk

• Tænd: Åbn opladningsetuiet, hvorefter ørepropperne automatisk tændes og opretter forbindelse til den sidst parrede enhed.
• Sluk: Sæt ørepropperne tilbage i opladningsetuiet, og luk låget. De vil automatisk frakoble sig og slukke.

Tryk på kontrolelementer

The Baseus Bass BS1 NC earbuds feature intuitive touch controls on each earbud. The specific functions can often be customized via the Baseus app.

Using the Baseus App

For a personalized listening experience, download the official Baseus app. The app allows you to:

• Tilpas berøringskontroller.
• Adjust EQ modes and Bass Boost.
• Enable Spatial Acoustics (Note: On Android devices, LDAC and Spatial Acoustics cannot be used simultaneously due to system limitations).
• Locate your earbuds (requires OPS access).

Opretholdelse

Rensning

• Rengør regelmæssigt ørepropperne og opladningsetuiet med en blød, tør og fnugfri klud.
• Brug ikke slibende rengøringsmidler, opløsningsmidler eller aerosolspray.
• Sørg for, at opladningskontakterne på både ørepropper og etuiet er fri for støv og snavs.

Opbevaring

Når ørepropperne ikke er i brug, skal de opbevares i deres opladningsetui for at beskytte dem og sikre, at de forbliver opladede.

Vandtæthed (IP55)

The earbuds are IP55 water-resistant, meaning they are protected against dust and low-pressure water jets from any direction. This makes them suitable for workouts and light rain. However, they are not designed for submersion in water or exposure to high-pressure water. The charging case is not water-resistant.

Fejlfinding

• Ørepropper parrer ikke: Ensure both earbuds are in the charging case, then open the lid to re-enter pairing mode. Check your device's Bluetooth settings to ensure it's discoverable and try re-pairing.
• Ingen lyd eller lav lydstyrke: Kontrollér lydstyrken på både din enhed og ørepropperne. Sørg for, at ørepropperne sidder korrekt i dine ører.
• Opladningsproblemer: Verify the charging cable is securely connected to both the case and the power source. Clean the charging contacts if necessary.
• ANC fungerer ikke effektivt: Ensure the earbuds are properly fitted in your ears. Switch between ANC modes using the touch controls or the Baseus app.
• Intermitterende forbindelse: Ensure your device is within the Bluetooth range (up to 10 meters) and there are no significant obstructions.

Specifikationer

Garanti og support

For garantioplysninger og kundesupport henvises til den officielle Baseus webwebstedet eller kontakt din forhandler. Gem din købskvittering til garantikrav.