SIMATE Kick Scooter T1 Pro User Manual

1. Introduktion

This manual provides essential information for the safe and proper use of your SIMATE T1 Pro Kick Scooter. Please read it thoroughly before initial use and retain it for future reference. The SIMATE T1 Pro is designed for recreational use and short-distance commuting for individuals weighing up to 220 lbs.

2. Sikkerhedsoplysninger

• Bær altid passende sikkerhedsudstyr, inklusive hjelm, knæbeskyttere og albuebeskyttere.
• Sørg for, at alle clampog fastgørelseselementer er forsvarligt strammet før hver tur.
• Kør ikke i vådt føre, på ujævne overflader eller om natten uden ordentlig belysning.
• Overhold lokale færdselslove og -regler.
• Maximum weight capacity is 220 lbs (100 kg).
• Adult supervision is recommended for younger riders.

3. Opsætning og montering

The SIMATE T1 Pro Kick Scooter comes largely pre-assembled. Follow these steps for final setup:

1. Udfoldning af scooteren:
   Place the scooter on a flat surface. Locate the folding mechanism near the base of the handlebar stem. Release the locking lever and carefully unfold the scooter until the stem clicks into its upright position. Ensure the locking mechanism is fully engaged and secure.
2. Montering af styr:
   Insert the handlebar grips into the T-bar. Ensure they are fully seated and the spring-loaded pins snap into place, securing the handlebars. Verify that the handlebars are firm and do not wobble.
3. Justering af styrhøjde:
   The handlebar height can be adjusted to three positions: 33 inches, 38 inches, and 42 inches. Loosen the quick-release clamp on the handlebar stem. Adjust the T-bar to the desired height, ensuring the locking pin engages in one of the pre-drilled holes. Tighten the quick-release clamp sikkert.

Figure 3.1: The SIMATE T1 Pro Kick Scooter features three adjustable handlebar heights (33", 38", 42") to accommodate various rider sizes.

Figure 3.2: Visual representation of the adjustable handlebar heights for different rider sizes.

4. Betjeningsvejledning

4.1 At køre på scooter

Place one foot firmly on the deck of the scooter. Use your other foot to push off the ground, gaining momentum. Once moving, place both feet on the deck, one behind the other, or side-by-side if comfortable. Maintain balance and steer by gently leaning and turning the handlebars.

4.2 Bremsning

The SIMATE T1 Pro is equipped with a rear foot brake. To slow down or stop, gently press your heel down on the rear fender brake. Apply pressure gradually to avoid sudden stops. Practice braking at low speeds before riding faster.

Figure 4.1: Proper use of the rear foot brake for controlled stopping.

4.3 Folding for Storage and Transport

To fold the scooter, ensure the handlebar is at its lowest setting. Locate the folding mechanism at the base of the stem. Release the locking lever and fold the handlebar stem down towards the deck until it locks into place. The compact design and lightweight aluminum frame (approximately 9 lbs) make it easy to carry with the included strap.

Figure 4.2: The scooter's foldable design allows for easy carrying and storage.

Figure 4.3: The scooter folds compactly for convenient transport.

4.4 All-Terrain Riding Features

The SIMATE T1 Pro is equipped with 8-inch wear-resistant wheels and a dual suspension system, providing a smoother ride over various surfaces, including pavement, grass, and light gravel. The ABEC7 bearings contribute to a fluid and efficient glide.

Figure 4.4: The 8-inch all-terrain wheels are designed for smooth rides on various surfaces.

Figure 4.5: The dual suspension system provides shock absorption for a comfortable ride.

4.5 Produkt overview Video

5. Vedligeholdelse

• Rensning: Tør scooteren af med reklameamp klud efter brug. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
• Smøring: Periodically check and lubricate moving parts such as the folding mechanism and wheel bearings if necessary.
• Inspektioner: Regularly inspect the wheels, brakes, and all fasteners for wear, damage, or looseness. Tighten any loose bolts or nuts.
• Opbevaring: Store the scooter in a dry, cool place away from direct sunlight and moisture to prevent corrosion and material degradation.

6. Fejlfinding

• Styrets vaklende bevægelser: If the handlebars feel loose, ensure the quick-release clamp is fully tightened and the locking pin is engaged in one of the height adjustment holes. Check the handlebar grips are fully inserted and secured.
• Knirkende hjul: This may indicate dirt or debris in the bearings. Clean the wheels and bearings. If the issue persists, consider replacing the bearings.
• Bremsen er ikke effektiv: Check the rear fender brake for any obstructions. Ensure the brake mechanism is clean and free of debris.
• Vanskeligheder ved foldning/udfoldning: Ensure the folding mechanism is clean and lubricated. Do not force the mechanism; check for any obstructions.

7. Specifikationer

8. Garantioplysninger

The SIMATE T1 Pro Kick Scooter comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

9. Support

For technical assistance, warranty claims, or any questions regarding your SIMATE T1 Pro Kick Scooter, please contact SIMATE customer support. Refer to the product packaging or the official SIMATE webhjemmeside for de seneste kontaktoplysninger.