Haisito C26A 26A 6V/12V/24V Smart Battery Charger User Manual

1. Introduktion

This manual provides essential instructions for the safe and efficient operation of your Haisito C26A Smart Battery Charger. This device is designed for charging and maintaining 6V, 12V, and 24V Lead-Acid (AGM, Gel, SLA, Flooded, WET, EFB), LiFePO4, and Lithium batteries. Please read this manual thoroughly before first use and retain it for future reference.

Image 1.1: The Haisito C26A Smart Battery Charger, featuring its handle and battery clamps.

2. Sikkerhedsoplysninger

Always prioritize safety when operating electrical equipment. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ventilation: Operate the charger in a well-ventilated area. Batteries can produce explosive gases during charging.
• Øjen- og hudbeskyttelse: Wear appropriate eye protection and protective clothing when working with batteries. Battery acid is corrosive.
• Undgå gnister: Do not smoke or allow sparks or flames in the vicinity of the battery or charger.
• Forbindelsesrækkefølge: Connect the output clamps to the battery terminals before plugging the charger into an AC outlet. Disconnect in reverse order.
• Polaritet: Ensure correct polarity. Connect the red (+) clamp til den positive batteripol og den sorte (-) polamp to the negative battery terminal. Reverse polarity protection is built-in, but correct connection is always recommended.
• Beskadiget udstyr: Do not operate the charger if it has been dropped, damaged, or if the power cord or clamps are compromised.
• Børn og kæledyr: Opbevar opladeren og batterierne utilgængeligt for børn og kæledyr.
• Indendørs brug: Denne oplader er designet til indendørs brug. Udsæt den ikke for regn eller overdreven fugt.
• Batteritype kompatibilitet: Ensure the charger is compatible with your battery type and voltage. Attempting to charge incompatible batteries can be dangerous.

3. Produktet er slutview

3.1 Komponenter

The Haisito C26A Smart Battery Charger features a compact design with an integrated handle for portability. It includes heavy-duty battery clamps for sikker forbindelse.

• Hovedenhed: Contains the charging circuitry, control panel, and LCD display.
• Integreret håndtag: For nem transport.
• Batteri Clamps: Red (+) and Black (-) for connecting to battery terminals.
• AC strømledning: For connecting to a standard wall outlet (100-240V AC input).
• Kontrolknapper: For selecting charging modes and current levels.

3.2 LCD-skærm

The large LCD provides real-time information about the charging process.

Billede 3.1: Detaljeret view of the Haisito C26A's LCD display, showing various charging parameters.

• Ladestrøm: Displays the current (Amps) being delivered to the battery.
• Charge Voltage: Viser batterivolumentage (volt).
• Batteri Voltage: Indicates the detected battery voltage (6V, 12V, 24V).
• Opladningsmængde: Displays the accumulated charge (AH).
• Indetemperatur: Shows the internal temperature of the charger.
• Battery Full Indicator: "FUL" indicates the battery is fully charged.
• Standby-indikator: "OFF" indicates the charger is in standby mode.
• Reparationsproces afsluttet: "End" indicates the repair process is complete.
• Charging Progress Bar: Visual representation of charge level (25%, 50%, 75%, 100%).
• Tilstandsindikatorer: Icons for Winter/Summer mode, Low/Medium/High current, and Repair mode.

4. Opsætning

Follow these steps to set up your Haisito C26A charger for operation:

1. Klargør batteriet: Sørg for, at batteripolerne er rene og fri for korrosion. Rengør dem om nødvendigt med en stålbørste.
2. Tilslut til batteri:
   • Tilslut rød (+) clamp til den positive (+) pol på batteriet.
   • Tilslut sort (-) clamp til den negative (-) pol på batteriet.
   • Sørg for, at forbindelserne er sikre.
3. Automatisk genkendelse: Opladeren vil automatisk registrere batterivolumentage (6V, 12V, or 24V) and type (Lithium, LiFePO4, Lead-Acid). This information will be displayed on the LCD.
4. Tilslut til vekselstrøm: Plug the charger's AC power cord into a standard 100-240V AC wall outlet. The charger will power on and begin the charging process based on its automatic detection.

Image 4.1: The Haisito C26A charger demonstrating automatic recognition of 6V, 12V, and 24V batteries, compatible with multiple battery types.

5. Betjeningsvejledning

5.1 9-Stage Smart opladningsproces

The Haisito C26A utilizes a 9-stage charging process to optimize battery power precisely and gently, ensuring efficient charging and extending battery life.

Billede 5.1: Visuel repræsentation af 9-ernetage charging process, showing how voltage and current are managed over time.

1. Batteriafsulfatering: Uses pulse current to break down lead sulfate crystals in deeply discharged or sulfated batteries.
2. Soft Start Charging: Gradually introduces current to the battery to prevent damage to very discharged batteries.
3. Bulkopladning: Charges the battery at its maximum current until it reaches approximately 80% capacity.
4. Absorption Charging: Charges at a decreasing current to bring the battery to 100% capacity.
5. Vedligeholdelsesladning: Maintains the battery at full charge with a small, constant current.
6. Batteritest: Monitors the battery to ensure it can hold a charge.
7. Recondition Charging: Anvender en højere lydstyrketage to equalize cells and improve battery performance.
8. Float & Maintenance Charging: Keeps the battery at optimal voltage for long-term storage.
9. Small Current to Maintain Charging: Continuously monitors and provides minimal current to prevent self-discharge.

5.2 Current Selection

The charger offers three adjustable current levels (Low, Medium, High) to suit different battery capacities and charging speed requirements. Press the "Current" button to cycle through the options.

Image 5.2: Current selection options for different battery voltages and the Repair Mode function.

Henstilling: Choose a current level appropriate for your battery's capacity. Higher currents charge faster but may not be suitable for smaller batteries.

5.3 Reparationstilstand

The Repair Mode (indicated by a wrench icon) uses small current pulse cycling to help restore and activate batteries that are sulfated or deeply discharged. This mode can run for up to 24 hours. Forsigtighed: This mode is not intended for repairing completely dead or physically damaged batteries.

5.4 Winter and Summer Mode (Temperature Compensation)

The charger automatically detects the ambient temperature and adjusts the charging voltage accordingly. This ensures optimal charging performance in both cold (Winter Mode) and warm (Summer Mode) environments, preventing overcharging or undercharging.

Image 5.3: The charger automatically adapting its charging profile based on ambient temperature for optimal battery health.

5.5 Automatic Full Stop and Maintenance

Once the battery reaches a full charge, the charger will automatically stop the bulk charging process and transition into a maintenance (trickle charge) mode. This prevents overcharging and keeps the battery at an optimal level for extended periods. For safety, the charger requires a reset (unplugging and replugging) for the next charging cycle.

6. Vedligeholdelse

• Rensning: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Opbevaring: Opbevar opladeren et køligt og tørt sted, når den ikke er i brug. Sørg for, at kablerne er pænt oprullet og ikke bøjet.
• Kabelinspektion: Periodically inspect the AC power cord and battery clamps for any signs of damage, fraying, or corrosion. Replace if damaged.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Haisito customer service directly. Contact details can typically be found on the manufacturer's official webwebstedet eller gennem dit købssted.