Akko 5075B brugerdefineret gamingtastatursæt brugermanual

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Akko 5075B Custom Gaming Keyboard Kit. The Akko 5075B is a 75% layout barebones mechanical keyboard kit featuring VIA programmability, multi-mode connectivity (wired, 2.4GHz, Bluetooth 5.0), a gasket mount design for enhanced typing feel, hot-swappable 5-pin sockets, and RGB backlighting. This kit is designed for enthusiasts who wish to customize their keyboard with their preferred switches and keycaps.

Billede: Top-down view of the Akko 5075B barebones keyboard kit, showcasing its 75% layout and empty switch sockets.

Opsætning

1. Installation af afbrydere

The Akko 5075B features hot-swappable 5-pin sockets, allowing for easy installation and removal of mechanical switches without soldering.

1. Align the pins of your desired mechanical switch with the holes in the PCB (Printed Circuit Board). Ensure the switch is oriented correctly.
2. Gently push the switch straight down until it clicks into place. Do not force the switch, as this may bend the pins.
3. Gentag for alle ønskede kontaktpositioner.

Image: A mechanical switch being inserted into a hot-swappable socket on the Akko 5075B keyboard using a switch puller.

2. Installing Keycaps

Once switches are installed, press your keycaps firmly onto the switch stems until they are seated securely.

3. Første tilslutning

Before first use, it is recommended to connect the keyboard via the wired USB-C connection to ensure proper power and initial recognition by your computer.

• Connect the USB-C cable to the port on the keyboard.
• Tilslut den anden ende af kablet til en ledig USB-port på din computer.
• Tastaturet burde blive genkendt automatisk af dit operativsystem.

Billede: Nærbillede view of the USB-C port located on the Akko 5075B keyboard for wired connectivity and charging.

Betjeningsvejledning

Tilslutningstilstande

The Akko 5075B supports three connectivity modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. A switch on the keyboard allows you to select the desired mode.

Image: The Akko 5075B keyboard positioned on a desk, illustrating its multi-device connectivity options including wired USB-C, 2.4GHz wireless, and Bluetooth.

• Kablet tilstand: Connect the USB-C cable to the keyboard and your computer. The keyboard will automatically operate in wired mode.
• 2.4 GHz trådløs tilstand:
  1. Locate the 2.4GHz USB receiver (often stored in a compartment on the keyboard).
  2. Sæt modtageren i en ledig USB-port på din computer.
  3. Switch the keyboard to 2.4GHz mode. The keyboard should connect automatically.
  

  Billede: Nærbillede view of the integrated storage slot for the 2.4GHz USB receiver on the Akko 5075B keyboard.

• Bluetooth 5.0-tilstand:
  1. Skift tastaturet til Bluetooth-tilstand.
  2. Aktiver Bluetooth på din enhed (computer, tablet, telefon) og søg efter nye enheder.
  3. Select "Akko 5075B" (or similar name) from the list of available devices to pair.
  4. The keyboard can store multiple Bluetooth profiles for quick switching between devices. Refer to the full manual for specific key combinations for profile skift.

Rotary Encoder (Volume Control)

The rotary encoder knob located on the top right of the keyboard primarily functions as a volume control. Rotate clockwise to increase volume, counter-clockwise to decrease volume. Pressing the knob typically mutes/unmutes audio.

Billede: En detaljeret view of the rotary encoder knob on the Akko 5075B keyboard, highlighted with a blue glow, indicating its function as a volume control.

VIA Softwaretilpasning

The Akko 5075B is VIA programmable, allowing for extensive customization of key assignments, macros, and lighting effects without firmware flashing. Download the VIA software from the official Akko webwebsted.

• Connect the keyboard via USB-C to your computer.
• Open the VIA software. The software should automatically detect your keyboard.
• Use the intuitive interface to remap keys, create macros, and adjust RGB lighting settings. Changes are applied in real-time.

Image: A screenshot of the VIA configuration software interface, showing options for key remapping, macro creation, and lighting adjustments for the keyboard.

RGB-baggrundsbelysning

The keyboard features customizable RGB backlighting. Lighting effects and brightness can be adjusted via the VIA software or through onboard key combinations (refer to the full manual for specific shortcuts).

Image: The Akko 5075B keyboard displaying its vibrant RGB backlighting, with individual key illumination visible.

Opretholdelse

Rengøring af tastaturet

• Frakobl tastaturet fra alle strømkilder før rengøring.
• Brug en tastehætteaftrækker til at fjerne tastehætterne for grundig rengøring.
• Brug trykluft til at fjerne støv og snavs mellem kontakterne.
• Tør tastaturkapperne og tastaturrammen af ​​med en blød, let fugtig klud.amp, fnugfri klud. Undgå for meget fugt.
• Brug ikke skrappe kemikalier, slibende rengøringsmidler eller opløsningsmidler.

Pleje af kontakter og taster

When hot-swapping switches, ensure they are inserted straight to avoid bending pins. Store spare switches and keycaps in a clean, dry environment.

Fejlfinding

• Tastaturet reagerer ikke:
  • Ensure the USB-C cable is securely connected or the 2.4GHz receiver is plugged in, or Bluetooth is paired.
  • Check the mode switch on the keyboard to ensure it's set to the correct connectivity mode.
  • Recharge the keyboard if using wireless modes, as low battery can cause connectivity issues.
  • Try connecting to a different USB port or computer to rule out port or system issues.
• Nøgler registreres ikke:
  • Ensure the switch is fully seated in its socket. Gently press down on the keycap.
  • If a specific key is not working, try hot-swapping the switch with a known working switch from another key to diagnose if the issue is with the switch or the socket.
  • Check for bent pins on the switch if it's not inserting correctly.
• RGB-belysning virker ikke/forkert:
  • Sørg for, at tastaturet er tændt.
  • Check VIA software settings for lighting configurations.
  • Refer to the full manual for onboard RGB control shortcuts to reset or change effects.
• Problemer med Bluetooth-parring:
  • Sørg for, at tastaturet er i Bluetooth-parringstilstand.
  • Remove "Akko 5075B" from your device's Bluetooth list and attempt to re-pair.
  • Ensure your device's Bluetooth is enabled and drivers are up to date.

Specifikationer

Garanti og support

Akko products are designed and manufactured to high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the official Akko website or contact Akko customer service directly. Please retain your proof of purchase for warranty claims.

Officiel Akko Webwebsted: www.akkogear.com

For further assistance, please contact the seller or manufacturer through the platform where the product was purchased.