1. Introduktion
The LOFREE Flow2 is a low-profile mechanical keyboard designed for versatility and durability. It features an aluminum alloy body, Void Linear Switches, and offers three connection modes: wired (USB-C), 2.4GHz wireless, and Bluetooth. This manual provides detailed instructions for setting up, operating, and maintaining your Flow2 keyboard.
Videobeskrivelse: En officiel produktvideoasing the LOFREE Flow2 Low-Profile Mechanical Keyboard, highlighting its design, features, and various components.
2. Opsætning
2.1 Hvad er der i æsken
Upon unboxing your LOFREE Flow2 keyboard, you will find the following items:
- LOFREE Flow2 Mechanical Keyboard
- 1.5m USB-C kabel
- 2.4 GHz modtager
- 4 Replacement Keycaps (for Windows/macOS compatibility)
- Brugermanual
Billedbeskrivelse: A flat lay image displaying all items included in the LOFREE Flow2 keyboard package: the keyboard, a braided USB-C cable, a small 2.4GHz USB receiver, four additional keycaps, and the user guide.
2.2 Forbindelse
The Flow2 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth. A dedicated switch on the back of the keyboard allows you to select your preferred mode.
Videobeskrivelse: An instructional video demonstrating how to connect the LOFREE Flow2 keyboard using its various connectivity options, including wired, 2.4GHz wireless, and Bluetooth modes.
Power Switch and Mode Selection
The power switch is located on the back of the keyboard, concealed behind one of the flip-out feet. Toggle this switch to select between Wired, Bluetooth (BT), or 2.4GHz wireless modes.
Billedbeskrivelse: A close-up of the back of the LOFREE Flow2 keyboard, illustrating the three-way toggle switch for wired, Bluetooth, and 2.4GHz wireless connections, located near the USB-C port and a foldable kickstand.
Kablet tilstand
- Ensure the power switch on the back of the keyboard is set to the Kablet position.
- Tilslut det medfølgende USB-C-kabel til tastaturets USB-C-port og den anden ende til din computer.
- Tastaturet vil automatisk blive genkendt af dit system.
2.4 GHz trådløs tilstand
- Ensure the power switch on the back of the keyboard is set to the 2.4G position.
- Sæt 2.4 GHz USB-modtageren i en ledig USB-port på din computer.
- Tryk på på tastaturet Fn + 4 for at aktivere 2.4 GHz-tilstand. Tastaturet burde oprette forbindelse automatisk.
Bluetooth-tilstand
- Ensure the power switch on the back of the keyboard is set to the BT position.
- Tryk på på tastaturet Fn + 1, Fn + 2, eller Fn + 3 for at vælge en Bluetooth-kanal. Indikatorlampen blinker, hvilket angiver parringstilstand.
- On your device (computer, tablet, phone), navigate to Bluetooth settings and select "LOFREE Flow2" from the list of available devices to pair.
2.3 System Switch (Windows/macOS)
The Flow2 keyboard is compatible with both Windows/Android and macOS/iOS operating systems. You can switch between system layouts using the following key combinations:
- For Windows / Android: Tryk og hold Fn + N.
- For macOS / iOS: Tryk og hold fn+m.
3. Betjeningsvejledning
3.1 Side Touch Bar Functions
The LOFREE Flow2 features a side touch bar for quick adjustments to volume and screen brightness, as well as a lock function.
Billedbeskrivelse: En detaljeret view of the keyboard's right side, showcasing the touch-sensitive bar with visual indicators for volume, screen brightness, and a lock feature.
- Lydstyrkekontrol: Swipe your finger up on the touch bar to increase volume, and swipe down to decrease it.
- Skærmens lysstyrke: Hold nede Fn key and swipe your finger up on the touch bar to increase screen brightness, or swipe down to decrease it.
- Låsefunktion: To prevent accidental touches, press and hold Fn + mellemrumstasten for approximately 3 seconds to toggle the touch bar lock.
3.2 Indstillinger for baggrundslys
Adjust the keyboard's backlight to suit your preference.
- Skift belysningstilstand: Trykke Fn + venstre pil or Fn + højre pil to cycle through different backlight modes (e.g., Steady On, Breathing, Off).
- Juster lysstyrke: Trykke Fn + Pil op to increase backlight brightness, and Fn + pil ned at mindske det.
4. Keycap and Switch Management
The LOFREE Flow2 keyboard comes with pre-installed Mac keycaps and includes additional Windows keycaps for customization. The switches are hot-swappable, allowing for easy replacement.
Billedbeskrivelse: The LOFREE Flow2 keyboard with several keycaps removed and placed beside it, illustrating the included Windows and macOS keycap options for system compatibility.
4.1 Swapping Keycaps
To change keycaps, use the included keycap puller:
- Insert both ends of the keycap puller into the gaps on either side of the keycap you wish to remove.
- Gently pull straight up until the keycap detaches.
- For larger keycaps (e.g., Spacebar, Enter, Shift), pull from both sides separately to prevent damage to the stabilizers.
- Juster den nye tastaturhætte med kontaktens stilk, og tryk godt ned, indtil den klikker på plads.
4.2 Fjernelse af kontakter
The Flow2 features hot-swappable switches. To remove a switch, use a switch puller (not included, but typically comes with switch sets):
- First, remove the keycap as described above.
- Align the switch puller with the clips on the top and bottom of the switch.
- Gently squeeze the clips and pull the switch straight upward. Avoid twisting to prevent bending the pins.
- To install a new switch, align its pins with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are straight before inserting.
Billedbeskrivelse: A diagram illustrating the internal components of a Void Linear Switch, including the stem, spring, and housing, alongside a force curve graph detailing its operating and return points.
5. Produktspecifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | OE926 |
| Produktdimensioner | 15.67 x 4.96 x 0.52 tommer |
| Varens vægt | 1.97 pund |
| Materiale | Aluminiumslegering |
| Forbindelsesteknologi | Bluetooth, 2.4GHz RF, USB-C (Wired) |
| Tastaturbeskrivelse | Mekanisk |
| Afbrydere | Void Linear Switches |
| Afstemningsfrekvens | 1000Hz (kablet og 2.4 GHz-tilstande) |
| Batteri | 3000mAh (up to 120 hours of use) |
| Særlige funktioner | Backlit, Hot-Swappable, Low-Profile Key, Programmable Keys (QMK/VIA), Rechargeable, Side Touch Bar |
| Kompatible enheder | Laptop, PC (Windows, macOS, Android, iOS) |
6. Fejlfinding
If you encounter issues with your LOFREE Flow2 keyboard, please refer to the following common solutions:
- Tastaturet reagerer ikke:
- Ensure the power switch on the back is in the correct position for your chosen connection mode (Wired, BT, or 2.4G).
- Check battery level. Connect the keyboard via USB-C to charge.
- For 2.4GHz, ensure the USB receiver is securely plugged in and you've pressed Fn + 4.
- For Bluetooth, ensure your device's Bluetooth is on, the keyboard is in pairing mode (Fn + 1/2/3), and it's paired correctly in your device's settings.
- Try restarting your computer and the keyboard.
- Backlight Not Working/Dim:
- Juster lysstyrken ved hjælp af Fn + Pil op/ned.
- Change lighting mode using Fn + Venstre/højre pil.
- Sørg for, at tastaturet har tilstrækkelig batteriopladning.
- Keys Not Registering Correctly (Windows/macOS):
- Verify the correct system layout is selected (Fn + N for Windows/Android, fn+m for macOS/iOS).
- If using QMK/VIA, ensure your custom layout is correctly loaded and active.
- Touch Bar Issues:
- Ensure the touch bar is not locked. Press and hold Fn + mellemrumstasten for 3 seconds to toggle the lock.
If these steps do not resolve your issue, please contact LOFREE customer support for further assistance.
7. Garanti og support
The LOFREE Flow2 keyboard is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For product support, technical assistance, or warranty claims, please visit the official LOFREE store or contact their customer service directly.
Officiel LOFREE-butik: LOFREE-butik på Amazon
