1. Introduktion
This manual provides detailed instructions for the setup, operation, and maintenance of your NETUM RD-1202W Industrial Bluetooth Barcode Scanner. The RD-1202W is a robust and versatile 2D/1D barcode reader designed for various industrial and commercial applications, offering multiple connectivity options and enhanced durability.
Nøglefunktioner omfatter:
- Industrial Durability: IP67 rated for dust, splash, and water resistance, with drop protection up to 12 ft (3.65 m).
- Fleksibel tilslutning: Supports 2.4G wireless and Bluetooth (HID/SPP/BLE) for connection to various devices.
- Flere scanningstilstande: Manual trigger, continuous, auto-sensing, and storage modes.
- Overlegen scanningsydelse: Advanced 1.3M CMOS sensor for fast and accurate reading of 1D and 2D barcodes.
- Lang batterilevetid: 2600mAh battery provides extended operation and charging via the included cradle.
2. Produktet er slutview
The NETUM RD-1202W barcode scanner is designed for ergonomic handling and robust performance. Below is an illustration of the scanner and its charging dock.
Figur 2.1: NETUM RD-1202W Barcode Scanner and Charging Dock. The image displays the yellow and black scanner resting in its black charging cradle, highlighting its ergonomic design and the scanner's lens.
2.1 Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- NETUM RD-1202W Barcode Scanner
- Charging Dock with 2.4G Receiver
- USB kabel
- Brugervejledning (dette dokument)
3. Opsætning og tilslutning
The RD-1202W offers both 2.4G wireless and Bluetooth connectivity options.
3.1 Opladning af scanneren
- Connect the USB cable to the charging dock and then to a power source (e.g., computer USB port or USB power adapter).
- Place the scanner onto the charging dock. Ensure proper alignment for charging.
- The scanner's indicator light will show charging status. A full charge typically takes approximately 4 hours.
The 2600mAh battery provides up to 20 hours of continuous operation or 30 working days if scanning 2000 barcodes per day.
3.2 2.4G trådløs forbindelse
This method uses the 2.4G receiver built into the charging dock for a plug-and-play experience.
- Connect the charging dock to your computer's USB port using the provided USB cable. The computer should automatically recognize the receiver.
- Tænd stregkodescanneren.
- The scanner will automatically pair with the receiver. A successful connection is usually indicated by an audible beep and/or a change in the scanner's indicator light.
The communication distance for 2.4G wireless is 30-100m (line of sight).
3.3 Bluetooth-forbindelse
The scanner supports HID, SPP, and BLE modes for connecting to laptops, PCs, smartphones, tablets, iPhones, iPads, and POS systems.
- Enable Bluetooth on your device: Ensure Bluetooth is active on your host device (e.g., computer, tablet, smartphone).
- Set Scanner to Bluetooth Mode: Scan the specific "Bluetooth Pairing" barcode from the included quick start guide or the full manual (if provided separately) to put the scanner into Bluetooth pairing mode. The scanner's indicator light will typically flash to indicate it's discoverable.
- Par med enhed: On your host device, search for available Bluetooth devices. Select "NETUM RD-1202W" (or similar name) from the list.
- Bekræft forbindelse: Once paired, the scanner will emit a confirmation beep, and its indicator light will change to a steady state.
Refer to the specific setting barcodes in the manual for switching between HID, SPP, and BLE modes if required by your application.
4. Betjening af scanneren
The RD-1202W offers various scanning modes to suit different operational needs.
4.1 Scanningstilstande
- Manual Trigger Mode: Press the trigger button to scan each barcode individually. This is the default mode.
- Kontinuerlig scanningstilstand: The scanner continuously emits a scan beam, reading barcodes as they pass within its field of view uden at skulle trykke på aftrækkeren.
- Auto-Sensing Scanning Mode: The scanner activates its beam only when a barcode is detected in its proximity, providing hands-free operation while conserving battery.
- Opbevaringstilstand: When out of range of Bluetooth or 2.4G wireless connectivity, the scanner can store up to 100,000 barcodes in its internal memory (2MB flash memory). To upload stored data, re-establish connection and scan the "Upload Data" barcode (refer to the full manual for specific setting barcodes).
To switch between these modes, scan the corresponding setting barcodes found in the detailed user manual provided with the product.
4.2 Barcode Scanning Procedure
- Sørg for, at scanneren er tændt og forbundet til din værtsenhed.
- Point the scanner's lens at the barcode you wish to scan.
- For manual trigger mode, press the trigger button. For continuous or auto-sensing modes, position the barcode within the scan area.
- A successful scan is indicated by an audible beep and/or a green light flash. The scanned data will be transmitted to your connected device.
The scanner is equipped with an advanced 1280H × 1024V pixels (1.3M) CMOS sensor, allowing it to read various small barcodes smoothly (1D: ≥3 mil; 2D: ≥5 mil (HD); 2D: ≥7 mil (SR)).
5. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your barcode scanner.
- Rengøring af scanneren: Brug en blød, fnugfri klud lidt dampened with water or a mild cleaning solution to wipe the exterior of the scanner and the scanning window. Avoid abrasive cleaners or solvents.
- Batteripleje: To maximize battery life, avoid fully discharging the battery frequently. Store the scanner in a cool, dry place when not in use for extended periods.
- Miljøbeskyttelse: While the scanner is IP67 rated for dust and water resistance, prolonged exposure to extreme conditions should be avoided. Do not submerge the scanner in water.
- Opbevaring: Store the scanner and its accessories in a safe place, away from direct sunlight, extreme temperatures, and corrosive materials.
6. Fejlfinding
If you encounter issues with your NETUM RD-1202W scanner, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Scanneren tænder ikke. | Problem med lavt batteri eller strøm. | Charge the scanner using the charging dock and USB cable. Ensure the cable and power source are functional. |
| Scanner does not connect to device. | Incorrect connection mode, out of range, or pairing issue. |
|
| Scanner reads barcodes inaccurately or not at all. | Damaged barcode, dirty scanning window, or incorrect symbology settings. |
|
| Scanned data does not appear on the screen. | Application not in focus or input field not active. | Ensure the cursor is in the desired input field of your application (e.g., text editor, POS software). |
If the problem persists, please contact NETUM customer support for further assistance.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | RD-1202W |
| Forbindelse | 2.4G Wireless, Bluetooth (HID/SPP/BLE) |
| Sensor | 1280H × 1024V pixels (1.3M) CMOS |
| Scanningshastighed | High-speed global exposure, Max frame rate 120FPS |
| Barcode Resolution | 1D: ≥3 mil; 2D: ≥5 mil (HD); 2D: ≥7 mil (SR) |
| Batteri | 2600mAh Lithium Polymer |
| Forventet batterilevetid | 20 hours continuous operation (approx. 30 days with 2000 scans/day) |
| Expected Charge Time | 4 timer |
| Flash-hukommelse | 2MB (stores up to 100,000 barcodes) |
| Kommunikationsafstand | 30-100m (sigtelinje) |
| Holdbarhed | IP67 (Dust-proof, Splash-proof, Waterproof), 12 ft (3.65 m) drop protection |
| Dimensioner (pakke) | 8.66 x 5.91 x 3.15 tommer |
| Varens vægt | 14.1 ounce |
| Fabrikant | NETUM |
8. Garanti og support
NETUM provides a 1 års garanti from the date of purchase for the RD-1202W barcode scanner. This warranty covers manufacturing defects and ensures product reliability.
For technical support, warranty claims, or any inquiries regarding your NETUM product, please contact NETUM customer service. Contact information can typically be found on the NETUM official webwebsted eller via din købsplatform.
Gem venligst din købsbevis for at validere garantien.
