1. Introduktion
This manual provides essential information for the safe and effective operation of your Blackstar ID:X-50 High Power Digital Combo 50W Guitar AmpLæs venligst denne manual grundigt, inden du bruger den ampapparatet for at sikre korrekt opsætning, betjening og vedligeholdelse. Gem denne manual til senere brug.
2. Vigtige sikkerhedsinstruktioner
- Strømkilde: Tilslut amplifier only to a power supply of the type described in this manual and marked on the unit. Ensure the power cord is properly grounded.
- Ventilation: Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Vand og fugt: Brug ikke dette apparat i nærheden af vand eller fugt.
- Varme: Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Rensning: Rengør kun med en tør klud.
- Service: Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
- Strømledning: Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
3. Produktet er slutview
The Blackstar ID:X-50 is a 50W digital combo guitar amplifier designed for versatile tone shaping and performance. It features multiple amp voices, built-in effects, and intuitive controls.
Figur 3.1: Frontvinkel view of the Blackstar ID:X-50 ampløfter, showcasing dens kompakte design og højttalergitter.
3.1 Betjeningselementer på frontpanelet
The front panel provides access to all primary sound shaping and effect parameters.
Figur 3.2: Detaljeret view of the ID:X-50 amplifier's top-mounted control panel, showing input, voice, gain, EQ, effects, and master sections.
- INPUT: Tilslut din guitar her.
- STEMME: Selects one of six distinct amp voices (Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2).
- GEVINST: Styrer mængden af overdrive eller distortion.
- BIND: Adjusts the overall output level of the selected voice.
- BAS, MELLEM, DISKANT: Standard 3-band equalizer controls.
- ISF (Uendelig Formfunktion): Blackstar's unique tone control, sweeping from a classic British sound to a modern American tone.
- EFFEKTER-sektion: Includes controls for Pre-FX, Modulation, Delay, and Reverb effects.
- MASTER-lydstyrke: Controls the final output volume of the amplivligere.
- MAGT: Selectable power levels (1W/10W/50W).
- SVAR: Emulates different valve amplifier responses (EL84, EL34, 6L6).
- Skærm: Shows patch names, effect selection, and parameter values.
3.2 Bagpaneltilslutninger
The rear panel provides connectivity for power, footswitch, audio output, and USB.
Figur 3.3: Bag view of the ID:X-50 amplifier, detailing the power input, footswitch, USB, line out, and effects loop connections.
- HOVEDINDGANG: Tilslut den medfølgende strømledning her.
- FODKONTAKT: Connect an optional Blackstar footswitch for remote control of functions.
- USB: For connecting to a computer for recording or software updates.
- LINE OUT / HEADPHONES: For connecting to headphones or an external mixing console/recording interface.
- EFFEKTER LOOP (SEND/RETURN): For integrating external stompboxes or effects processors.
4. Opsætning
- Udpakning: Fjern forsigtigt amplifier from its packaging. Inspect for any signs of damage.
- Placering: Placer ampPlacer apparatet på en stabil, plan overflade. Sørg for tilstrækkelig ventilation omkring enheden.
- Strømtilslutning: Sørg for amplifier's power switch is in the OFF position. Connect the supplied power cord to the MAINS INPUT on the rear panel and then to a suitable grounded power outlet.
- Guitarforbindelse: Connect your guitar to the INPUT jack on the front panel using a high-quality instrument cable.
- Valgfri tilslutninger:
- If using a footswitch, connect it to the FOOTSWITCH jack on the rear panel.
- For headphones or direct recording, connect to the LINE OUT / HEADPHONES jack.
- For external effects, connect your effects unit to the EFFECTS LOOP (SEND/RETURN) jacks.
5. Betjeningsvejledning
5.1 Powering On and Basic Sound
- Turn the MASTER volume control to its minimum setting.
- Flip the power switch to the ON position. The display will illuminate.
- Select a VOICE (e.g., Clean Warm).
- Adjust the GAIN and VOLUME controls to achieve your desired level of drive and output for the selected voice.
- Slowly increase the MASTER volume to a comfortable listening level.
5.2 Amp Stemmer
The ID:X-50 offers six distinct amp stemmer:
- Clean Warm: Smooth, dynamic clean tone.
- Clean Bright: Brighter clean tone with more sparkle.
- Knas: Classic rock crunch with good articulation.
- Super Crunch: Higher gain crunch for heavier rhythm.
- OD 1: Modern overdrive with tight bass and singing highs.
- OD 2: Aggressive, high-gain lead tone.
Rotate the VOICE knob to cycle through these options. The selected voice will be shown on the display.
5.3 Equalization (EQ) and ISF
Use the BASS, MIDDLE, and TREBLE knobs to fine-tune the tonal characteristics of your sound. The ISF control allows you to shift the amplifier's tonal response between a British-style (counter-clockwise) and American-style (clockwise) sound.
5.4 Indbyggede effekter
The ID:X-50 includes over 35 effects, categorized into Pre-FX, Modulations, Delays, and Reverbs. Use the dedicated EFFECT section controls and the display to select and adjust parameters.
Figur 5.1: A hand demonstrating adjustment of a control knob on the amplifier's front panel, highlighting user interaction with the effects section.
- Valg af effekter: Use the dedicated buttons or knobs within the EFFECTS section to navigate through effect types and select a specific effect.
- Justering af parametre: The display will show the selected effect and its parameters. Use the associated controls to modify these parameters. Up to 4 parameters per effect can be fine-tuned.
5.5 Valve Response Emulation
The RESPONSE control allows you to emulate the characteristics of different power amp ventiler:
- EL84: Bright, chimey, and dynamic.
- EL34: Classic British rock tone, rich and powerful.
- 6L6: American-style tone, tight low-end and clear highs.
5.6 Patch Saving and Recall
The ID:X-50 allows you to save your custom amp and effect settings as patches for quick recall. Refer to the display and associated controls for specific instructions on saving and recalling patches.
5.7 Valg af effektniveau
The POWER switch allows you to select between 1W, 10W, and 50W output levels. This is useful for adapting the amplifier's volume and headroom to different environments, from bedroom practice to stage præstation.
6. Vedligeholdelse
- Rensning: Frakobl amplifier from the power supply before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use liquid cleaners or abrasive materials.
- Opbevaring: Når den ikke er i brug i længere perioder, skal den opbevares amplifier in a dry, dust-free environment.
- Transport: Ved transport af ampskal du sørge for, at den er forsvarligt pakket for at forhindre fysisk skade.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Netledning ikke tilsluttet; Stikkontakt defekt; Ampslukket for strømafbryderen. | Ensure power cord is securely connected. Test outlet with another device. Turn power switch ON. |
| Ingen lyd | Guitar cable faulty; Volume controls too low; Incorrect input selected; Speaker disconnected (internal). | Check guitar cable. Increase GAIN, VOLUME, and MASTER controls. Ensure guitar is plugged into INPUT. Contact service if speaker is suspected. |
| Forvrænget lyd | GAIN too high for clean voice; Faulty cable; Speaker damage. | Reduce GAIN. Test with a different cable. If distortion persists at low gain, contact service. |
| Effekter virker ikke | Effect level set to zero; Effect bypassed; Incorrect effect selected. | Check effect parameters on the display. Ensure effect is active and not bypassed. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Blackstar customer support or a qualified service technician.
8. Specifikationer
- Model: Blackstar ID:X-50
- Output Wattage: 50 watt (valgbar 1W/10W/50W)
- Amp Stemmer: 6 (Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2)
- EQ: 3-Band (Bass, Middle, Treble) + ISF (Infinite Shape Feature)
- Effekter: Over 35 built-in effects (Pre-FX, Modulation, Delay, Reverb)
- Valve Response Emulation: EL84, EL34, 6L6
- Forbindelse: Guitar Input, Footswitch, USB, Line Out/Headphones, Effects Loop (Send/Return)
- Dimensioner: 18.23 x 12.68 x 21.73 tommer (produktmål)
- Vægt: 33 pund
- Materiale: Metal
- Farve: Sort
9. Garanti og support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Blackstar Amplifikation website. For technical support, service, or spare parts, please contact your authorized Blackstar dealer or Blackstar customer support directly.
Blackstar Amplification Official Webwebsted: www.blackstaramps.com
