Chtoocy IC019S drypvandingssystem brugermanual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your Chtoocy IC019S Drip Irrigation System. This automatic plant watering system is designed to provide independent watering for up to 30 potted plants across two zones, ensuring efficient and consistent hydration.

Billede 1.1: The Chtoocy IC019S Drip Irrigation System controller connected to a water reservoir and two potted plants, illustrating its function.

2. Pakkens indhold

Før du starter installationen, skal du kontrollere, at alle nedenstående komponenter er til stede i din pakke:

• 1 x Control Unit (Main device with display)
• 2 x Water Tubes (15 meters / 49 feet each)
• 30 x Watering Drippers
• 30 x T-Joints
• 2 x filtre
• 2 x Anti-Siphon Components
• 2 x Hooks (for hanging the control unit)
• 1 x USB-C Cable (for power)
• 1 x brugermanual

Billede 2.1: Visual representation of all items included in the product package.

3. Produktfunktioner

The Chtoocy IC019S Drip Irrigation System offers several key features for efficient plant care:

• Dual-Pump Automatic Watering: Supports two independent watering zones, capable of watering up to 30 potted plants simultaneously. Each pump delivers a high flow rate of 400ML per minute, totaling 800ML per minute when both are active.
• Tilpasbare vandingsplaner: Program specific watering times and frequencies for each pump independently.
• Precise Watering Control: Adjust watering duration from 10 seconds to 30 minutes. Set watering frequency from 1, 2, 3, 4, 6, 8, 12 hours, or longer intervals from 1 to 15 days.
• Prevents Overwatering: Delivers water directly to plant roots in a slow, controlled manner, allowing for gradual soil absorption and reducing water waste.
• Nem installation: Designed for straightforward setup with clear instructions and all necessary components included.

Billede 3.1: Illustration of the independent dual-pump system covering up to 30 potted plants.

4. Opsætningsvejledning

Follow these steps to set up your Chtoocy Drip Irrigation System:

1. Forbered slanger: Cut the water tubes to the desired lengths using scissors, ensuring each plant receives a dedicated drip line.
2. Connect to Water Inlet: Connect one end of the main water tube to the water inlet port on the control unit.
3. Vedhæft filter: Connect a filter to the other end of the main water tube. This filter will be submerged in your water reservoir.
4. Position Water Source: Place the filter and the end of the main water tube into your water reservoir (e.g., a bucket or container), ensuring the filter is below the water level.
5. Connect to Water Outlet: Connect the distribution tubing to the water outlet port on the control unit.
6. Install Anti-Siphon Component: Insert the anti-siphon component into the distribution tubing near the control unit. This prevents water from continuously siphoning from the reservoir.
7. Install T-Joints: Use T-joints to branch off the main distribution tubing to individual plant drippers.
8. Connect Drippers: Attach a dripper to the end of each branch tube and place it into the soil of your potted plant.
9. Secure Control Unit: Use the provided hooks to hang the control unit securely near your water source.
10. Tænd: Connect the USB-C cable to the control unit and a suitable power adapter (not included) to power the system.

Billede 4.1: Step-by-step visual guide for installing the drip irrigation system components.

5. Betjeningsvejledning

The Chtoocy IC019S features a programmable timer for precise watering schedules. The control unit has an LED display and intuitive buttons for setting the clock and watering parameters for Pump 1 (P1) and Pump 2 (P2).

5.1. Setting the Real-Time Clock

1. Tryk på Ur button (often represented by a clock icon).
2. Brug OK dial to adjust the hour and minute. Press OK for at bekræfte hver indstilling.
3. Ensure the clock is set to the correct 24-hour format for accurate scheduling.

5.2. Programming Watering Schedules (P1 and P2)

Each pump (P1 and P2) can be programmed independently. The process is similar for both.

1. Tryk på P1 or P2 button to select the pump you wish to program.
2. Indstil starttid: Brug OK dial to set the desired start time for watering (e.g., 12:00 AM). Press OK for at bekræfte.
3. Indstil vandingsvarighed: Brug OK dial to set how long the pump will run (e.g., 20 seconds, 1 minute, up to 30 minutes). Press OK for at bekræfte.
4. Set Interval Time: Brug OK dial to set the watering frequency. Options include hourly intervals (1H, 2H, etc.) or daily intervals (1 Day, 2 Days, up to 15 Days). Press OK for at bekræfte.
5. Repeat these steps for the other pump if independent scheduling is desired.

Examptidsplan:

• Pump 1 (P1): Start Time: 12:00 AM, Duration: 20s, Interval: 1 Day (waters every day at 12:00 AM for 20 seconds).
• Pump 2 (P2): Start Time: 3:00 PM, Duration: 1 min, Interval: 2 Days (waters every two days at 3:00 PM for 1 minute).

Billede 5.1: Example of customizable watering schedules for Pump 1 and Pump 2.

Billede 5.2: The LED display showing current time and programmed watering schedules.

5.3. Manuel vanding

The system typically includes a manual watering function. Refer to the control unit's buttons for a dedicated manual watering button (often a water drop icon) or a combination of buttons to initiate immediate watering outside of the programmed schedule.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your drip irrigation system.

• Rens filtre: Periodically check and clean the water filters to prevent blockages from debris in the water reservoir. Rinse them under running water.
• Inspect Tubing and Drippers: Regularly inspect all tubing and drippers for kinks, blockages, or damage. Ensure drippers are not clogged by mineral deposits or plant roots.
• Check Anti-Siphon Valves: Ensure the anti-siphon components are functioning correctly. If water is continuously flowing when the pump is off, the anti-siphon valve may be faulty or improperly installed. Use the provided syringe to clear any potential blockages in the anti-siphon valve if water flow is restricted.
• Vandreservoir: Keep the water reservoir clean and free of algae or sediment that could clog the system. Refill as needed.
• Batteri/strøm: If the unit is battery-powered, monitor battery levels. If USB-C powered, ensure a stable power supply.

7. Fejlfinding

If you encounter issues with your Chtoocy Drip Irrigation System, refer to the following common problems and solutions:

• Ingen vandgennemstrømning:
  • Check if the water reservoir has sufficient water.
  • Ensure the filters are clean and not clogged.
  • Verify all tubing connections are secure and free of kinks.
  • Check if the anti-siphon valve is blocked. Use the provided syringe to clear it.
  • Confirm the power supply to the control unit is active.
• Continuous Water Flow (Siphoning):
  • This indicates the anti-siphon component is not working or is improperly installed. Ensure it is correctly positioned in the tubing.
  • Verify that the water reservoir is not placed significantly higher than the plants, which can contribute to siphoning.
• Inconsistent Watering:
  • Review your programmed watering schedules (start time, duration, interval) for accuracy.
  • Check for partial blockages in drippers or tubing that might reduce water delivery to specific plants.
  • Ensure the water level in the reservoir is consistently above the filter.
• Sværhedsgradsprogrammering:
  • Carefully re-read Section 5: Operating Instructions. Programming can be precise; ensure each step is followed.
  • Practice setting a simple schedule for one pump to familiarize yourself with the interface.

8. Specifikationer

9. Garanti og support

Specific warranty details are not provided in the product information. For warranty claims, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official Chtoocy webwebsted.